• 한국정보통신학회논문지
• /
• 제21권10호
• /
• pp.1950-1956
• /
• 2017

정밀 푸드 프린팅 분야에서 출력 대상물의 정밀한 측위기술은 대단히 중요하다. 본 논문에서는 영상처리를 통하여 라떼 아트 프린터의 커피 잔을 정밀하게 측위하는 방법을 제안한다. 프린터 상단 측면에 설치된 카메라 센서로부터 얻은 이미지를 투영변환을 통하여 Top-View 이미지로 변환하고 이미지의 에지를 검출 후 Circular Hough 변환을 통하여 컵의 중심점 및 반지름을 검출하였다. 성능 평가 결과 0.1 ~ 0.125초의 영상 처리 속도, 92.26% 의 컵 검출률을 보여 라떼 아트 출력 소요 시간에 영향을 거의 주지 않으면서 거의 완벽하게 컵을 검출하는 것을 확인하였으며, 검출된 컵의 중심점 좌표 및 반지름 값들이 평균적으로 1.5mm 이내의 매우 적은 오차를 보여 본 논문이 해결하고자 했던 인쇄 위치 오차 문제를 해결한 것으로 평가된다.

• 한국의류산업학회지
• /
• 제14권6호
• /
• pp.960-967
• /
• 2012

The study aims to design the corset type long-line bra patterns that compensate part-somatotype of women in their 20s. The corset type long-line research bra patterns consist of 4 sections: cup, front bodice, back bodice, and shoulder strap. The full cup is made up of 2 lower part pieces and 1 upper part piece, and the shoulder strap is 16 millimeters wide. The method to design the patterns is shown in figure 4 and figure 5. The result of wearing test showed that, while the wearing testers recognized some significant differences in 19 out of 26 criteria, the examiners did in 17 out of 23. The criteria more than 1 in an average value between research bras and commercial bras were 'appropriateness of breadth of shoulder strap', 'appropriateness of pressure of armhole circumference'. 'appropriateness of pressure of waist', 'suitability of side line and body curve', 'appropriateness of positional pressure of chest circumference', 'appropriateness of positional pressure of upper part line', 'appropriateness of positional pressure of bottom part line', and 'satisfaction of whole silhouette of side and back'. The research and commercial bras were evaluated 4.23 and 3.44 respectively by the testers, and 4.25 and 3.40 by the examiners. The former ones were scored higher by both parties. They were also appreciated higher in general silhouettes of fitting and appearance.

• 에너지공학
• /
• 제23권4호
• /
• pp.169-175
• /
• 2014

에틸벤젠의 안전한 취급을 위해, 폭발한계는 문헌을 통해 고찰하였으며, 인화점과 발화지연시간에 의한 자연발화온도는 시험장치를 이용하여 측정하였다. 인화점의 경우 밀폐식 장치인 Setaflash와 Penski-Martens에 의한 하부인화점은 각 각 $20^{\circ}C$와 $22^{\circ}C$로 측정되었으며, 개방식인 Tag와 Cleveland에서는 각 각 $25^{\circ}C$와 $28^{\circ}C$로 측정되었다. ASTM E659 장치를 사용하여 자연발화온도와 발화지연시간을 측정하였고, 최소자연발화온도는 $430^{\circ}C$로 측정되었다. 에틸벤젠의 측정된 인화점을 이용하여 폭발하한계와 상한계는 0.93 Vol.%와 7.96 Vol.%로 계산되었다.

• 한국화재소방학회논문지
• /
• 제25권4호
• /
• pp.28-34
• /
• 2011

사이클로헥사논의 안전한 취급을 위해서 $25^{\circ}C$에서 폭발한계를 고찰하였고, 실험장치를 이용하여 하부 인화점과 발화지연시간에 의한 발화온도를 측정하였다. 공정의 안전을 위해서 사이클로헥사논의 폭발하한계는 1.1 Vol.%($100^{\circ}C$), 상한계는 9.4 Vol.%를 추천하였고, 하부인화점은 밀폐계에서 $42{\sim}43^{\circ}C$와 개방식에서 $49{\sim}51^{\circ}C$로 측정되었다. ASTM E659-78 장치를 사용하여 자연발화온도와 발화지연시간을 측정하였고, 여기서 측정된 최소자연발화온도는 $415^{\circ}C$였다.

• 한국화재소방학회논문지
• /
• 제25권2호
• /
• pp.120-125
• /
• 2011

노말도데칸의 안전한 취급을 위해서 25에서 폭발한계를 고찰하였고, 하부인화점과 발화지연시간에 의한 발화온도를 측정하였다. 공정의 안전을 위해서 노말도데칸의 폭발하한계는 0.60Vol.%, 상한계는 4.7Vol.%를 추천하였고, 하부인화점은 밀폐계에서 $77^{\circ}C$과 $80^{\circ}C$와 개방식에서 $84{\sim}87^{\circ}C$로 측정되었다. ASTM E659-78 장치를 사용하여 자연발화온도와 발화지연시간을 측정하였고, 최소자연발화온도는 $222^{\circ}C$ 측정되었다.

• 패션비즈니스
• /
• 제22권5호
• /
• pp.32-40
• /
• 2018

Big breasted women often experience dissatisfaction with ready-made brassieres, that do not account for individual breast types nor provide adequate cup sizes. This study was conducted to provide basic information on common breast shape and measurements of Korean big-breasted women, and to facilitate development of big-breasted women's bras with excellent fit and comfort. The study analyzed direct upper body measurements of 178 women in their 20's whith cup size C or bigger in the 5th, 6th and 7th Size Korea. In addition, 3D body scan data of women with bra size 75 and cup size C were re-collected and their breast types were examined. Average under-bust circumference of big-breasted women was 75 size in brassiere size. The average stature was 159.78 cm and the body weight was 60.33kg, indicating "overweight". Also, it was revealed that common breast types of big-breasted women, were hemispheric and cone types. The study can facilitate better understanding of breast shapes and sizes of standard big-breasted women, and will be useful as reference in selection of subjects in future studies.

• 대한기계학회논문집
• /
• 제18권8호
• /
• pp.2005-2015
• /
• 1994

An analytical method based on the upper bound approach for the cup-bar axisymmetric combined extrusion is presented to determine the deformation zones as well as extrusion load and deformed geometry in the early stage. A new kiematically admissible velocity field is derived by the appropriate transformation of the original velocity field and applying the flow function approach. The derived velocity field is directly related to the boundary function for the plastically deforming zones and the parameter controlling the flow direction to the forward part or backward part. Experiments are carred out with the annealed aluminum 2024 at room temperature for the various area reductions. The workhardening effect is considered in the formulation as a function of the height ratio between the deformed billet and the orighinal billet to calculate the extrusion pressures. The theoretical predictions for the extrusion loads and deformed configuration are in good agreement with the experimental results.

• 소성∙가공
• /
• 제3권3호
• /
• pp.291-301
• /
• 1994

In the simultaneous forward-backward extrusion the effects of some process variables including area reduction, stroke advance, materials(Al 2024 and commercial pure copper) on the extrusion load, plastic flow and height ratio of upper to lower extruded parts are experimentally investigated and analyzed. Grid-marking technique is employed to visualize the plastic flow. The influence of using split and original specimen on the extrusion load and height ratio is evaluated by experiments. Experimental results show that the plastic flow if oriented to the part of lower area reduction in the begining but it is usually variated during the overall process. The configurations of plastic deformation and plastic flow are dependent on the working materials and the lubricational conditions.

• 대한물리의학회지
• /
• 제11권1호
• /
• pp.115-125
• /
• 2016

PURPOSE: The purpose of this study was to compare the effects of task-oriented training and virtual reality training on upper extremity function, balance ability, depression in stroke patients. METHODS: Forty stroke patients were randomly allocated into a task oriented training group (TTG, n = 20), a virtual reality training group (VRG, n = 20). Both groups received the usual physical therapy. In addition, TTG patients underwent task training such as sweeping the table, cup stacking, carrying wood block. VRG patients underwent virtual reality training using X-box kinect. Both groups received 30 minutes of training per day, five times per week, for twelve weeks. RESULTS: After intervention, both groups showed significant improvement on upper extremity function, balance ability, and depression. VRG showed more improvement on upper extremity function, balance ability, and depression than TTG. CONCLUSION: According to the results of this study, task-oriented training and virtual reality training are feasible and suitable for stroke patients. And virtual reality training is more effective method than task oriented training.

• 한국전문물리치료학회지
• /
• 제11권1호
• /
• pp.75-83
• /
• 2004

The purpose of this study was to research the effects of vocalization on upper extremity motion during occupational performance and to compare non-meaning and meaning vocalization. Experiments were performed on 30 subjects. They had no medical history of neurological problems with their upper extremities. Using a tea cup, a tea tray, and a tea spoon, they set a table during vocalization. We used meaning and non-meaning vocalization with the subjects. An example of meaning vocalization would be naming something, and an example of non-vocalization would be saying, "Ah." We used a 3-D analysis system called CMS-HS. We analyzed the motion in the angular velocity and acceleration of the elbow while recording performance time. The results of this study showed that vocalization enhanced the angular velocity and acceleration of the elbow, and also enhanced performance time. In short, vocalization improved upper extremity motion by making it faster and smoother. There were no significant differences between meaning and non-meaning vocalization.