• 환경영향평가
• /
• 제8권1호
• /
• pp.41-49
• /
• 1999

This study was carried out to estimate the runoff loading characteristics of the non-point source pollutions in the Youngsan river basins by the method of land-use types and rainfall. The lysimeter test, rainfall and stream flowmeter measurement were performed to develop the pollutant loading unit discharged from the non-point sources. As the non-point sources, the unit pollutant discharge rates were different from the land-use types such as paddy field, upland, forest, housing site and others. The pollutant loading units classified by land-use types in the Youngsan river basins are as follows: The total BOD loading rate is 15.3 ton/day and the housing site is discharged 50.6%, the total T-N loading rate is 6.0 ton/day and the paddy field and upland is discharged 77.6%, and the total T-P loading rate is 0.39 ton/day and the paddy field and upland is discharged 81.2%. The pollutant loadings by rainfall in the Youngsan river basins are about 7,425 ton/year of BOD, 324 ton/year of T-N and 118 ton/year of T-P, respectively.

• 농촌계획
• /
• 제23권4호
• /
• pp.39-48
• /
• 2017

National Institute of Environmental Research (NIER) has proposed new methodology for estimating unit load in order to overcome the limitations of past unit load based on short-term and local area based data. In the case of agricultural land, however, the results presented by NIER are still limited because of various agricultural activities and farmland characteristics. In this study, liquid manure treated paddy field and organic farming upland were selected for considering agricultural diversity. Four different methods for evaluating unit load were used for comparing previous research results. The results of different methods presented various trends compared with those of existing studies. Paddy field treated liquid manure was 1.3 times higher for T-N load and 3.1 times for T-P load than conventional paddy field. Conventional upland was 4.4 times higher for T-N load and 1.8 times higher for T-P load than organic farming upland. In the case of non-conventional farmland, this study showed different values with the unit loads presented by NIER. This implies that it is necessary to review and apply the unit loads considering various agricultural conditions when establishing environmental policy and rural planning.

• 한국관개배수논문집
• /
• 제21권1호
• /
• pp.99-108
• /
• 2014

This study investigated the effects of NPS(non point source) pollution reduction of sediment traps through field experiments. Various sizes of 4 sediment traps were applied in a upland field located in Gunwi and assessed the infiltration and storage effects as well as NPS pollution reduction effects of this technique. The characteristics of deposited soil in the sediment traps were also analyzed including distribution of particle size, soil texture, and chemical properties. The results showed that slightly different composition of soil particle size from each sediment trap with high proportion of 0.15mm and 0.25mm ranges of soil particle diameters, while the loamy sand is the main types of deposited soils in the sediment traps. Decreased NPS pollution were observed from the water quality analysis of the samples taken from the sediment traps. Further research need to be proceeded continuously to improve this technique in order to utilize on upland fields for management of agricultural NPS pollutions.

• 한국대기환경학회지
• /
• 제17권2호
• /
• pp.203-212
• /
• 2001

During the growing season from June to August, 2000, the soil NO and $N_2$O fluxes were measured to elucidate characteristics of soil nitrogen emissions from different types of intensively managed agricultural soils at outskirts of Kunsan City, located in the western inland of Korea, Flux measurements were made using a closed chamber technique at two different agricultural fields; one was made from upland field, and the other from rice paddy field. The flux data from upland field were collected for both the green onion and soybean field. Concentrations of NO and $N_2$O inside a flux chamber ar 15 minute sampling interval were measured to determine their soil emissions. Either polyethylene syringes of teflon air bags were used for gas samples of $N_2$O and NO. The analysis of NO and $N_2$O was made using a chemiluminesence NO analyzer and GC-ECD, respectively no later than few hours after sample collection at laboratory. The gas fluxes were varied more than one standard deviation around their means. Relatively high soil gas emissions occurred in the aftermoon for both NO and $N_2$O. A sub-peak for $N_2$O emission was observed in the morning period, but not in the case of NO. NO emissions from rice paddy field were much less than those from upland site. It seems that water layer over the rice paddy field prevents gases from escaping from the soil surface covered with were during the irrigation and acts as a sink of these gases. The NO fluxes resulted from these field experiments were compared to those from grass soil and they were found to be much higher. Diurnal and daily variations of NO and $N_2$O emission were discussed and correlated with the effects of nitrogen fertilizer application on the increase of the level of soil nitrogen availability.

• The Plant Pathology Journal
• /
• 제27권4호
• /
• pp.324-332
• /
• 2011

Soil-borne barley yellow mosaic disease caused by Barley yellow mosaic virus (BaYMV) or Barley mild mosaic virus (BaMMV) gives a serious threat to the winter barley cultivated in the southern regions in Korea. It is important to develop resistant varieties for stable and high-yield production. The objectives of this study were to evaluate 22 genotypes of exotic barley germplasms carrying the resistance genes rym1 through rym12, with the exception of rym10, and to determine the genes that confer resistance to BaYMV or BaMMV in Korea. Using the traditional visual scoring of symptoms at 4 locations over 3 years, average disease rate values differed (P < 0.001) among the genotypes. ELISA test revealed the presence of both BaYMV and BaMMV in all of the field sites but Jinju and significantly different rates of infection among genotypes and years. Barley genotypes differed in how virus quantities and pathogen-induced symptoms were correlated, especially in response to BaYMV. Disease incidence was affected by the climatic conditions present during the early growing stage before overwintering. A Chinese landrace, 'Mokusekko 3', carrying rym1 and rym5 was comparatively resistant at all locations studied. The barley genotypes carrying either rym6 or rym9 were susceptible to the viral strains. The genotypes carrying rym5 were resistant in Jinju and Milyang but susceptible in Iksan and Naju. The resistance genes rym2 and rym3 were effective in local strains and would be potent contributors to disease resistance.

• Journal of Biosystems Engineering
• /
• 제39권1호
• /
• pp.1-10
• /
• 2014

Purpose: This research was conducted to evaluate feasibility of a crank-type walking cultivators for weeding in furrowed upland. Methods: A walking cultivator developed by RDA was selected and evaluated with its working speed (S), cultivation depth (CD) and weeding performance (WP). The evaluation was performed in upland field on July and August, 2012. Also kinematic analysis of the machine was performed to draw out design improvements. Results: S in flat, uphill and downhill were about 0.11 m $s^{-1}$, 0.11 m $s^{-1}$, and 0.13 m $s^{-1}$ respectively. It was found that S had a low relevance with user conditions. The CD was 35 ~ 40 mm which was satisfied with the RDA guide for weeding machine. A wide variation was observed in values of WP depending on the growth stages of weeds and field conditions. The cultivator showed low performance in eliminating the well-grown weeds. Kinematic simulation revealed that high forward speed caused a high ratio of un-weeded area. Conclusions: The weeding performance of the cultivator was satisfactory for weeds in early growth stage but it showed difficulties in handling on up-slope and in entering up-land. Specifically, the weight of the cultivator was judged as overweight for female workers. The crank-hoe type cultivator was judged as unsuitable for small walking type machine due to weight of the four-bar linkage system. Kinematic analysis revealed that the ratio of crank speed to the ground speed must be 850 rpm s $m^{-1}$ (255 rpm based on 0.3 m $s^{-1}$) or greater to avoid uncultivated area. Selection of forward speed is a decisive factor in designing the weeding cultivator.

• 한국지구과학회지
• /
• 제23권5호
• /
• pp.406-415
• /
• 2002

토양중 중금속의 층위별 농도분포 및 경작지토양 표면의 축적현상을 파악하고, 오염가능성을 평가하기 위하여, 경작지 및 산지토양의 중금속농도(Cu(II), Zn(II), Pb(II), Cd(II))를 층위별로 0.1mole L$^{-1}$ HCI 추출법과 HNO$_3$-HCIO$_4$ 분해추출법을 이용하여 조사하였다. 0.1mole L$^{-1}$ HCI 추출법에서 경작지토양의 표층 중금속농도는 산지토양에 비하여 Pb(ll)를 제외하고 높은 농도를 보였다. 층위별 농도분포는 경작지토양의 표층에서 Cu(II), Zn(II), Cd(II)농도가 심층에 비하여 월등히 높은 반면, 산지토양에서는 층위별 농도분포의 차가 없었다. HNO$_3$-HCIO$_4$분해추출법에서, 중금속농도는 산지토양이 경작지토양보다 높았으며, 층위별 분포에 있어서는 모든 토양에서 큰 차이를 보이지 않았다. 이와 같은 결과를 종합해 보면, 중금속의 자연함량은 산지토양이 높았음에도 불구하고, 인간활동에 의해 유입된 중금속이 경작지토양의 표층에서 축적된 것으로 판단된다. 또한 이들 표층에 분포한 중금속은 토양으로부터 용출되기 쉬운 형태로 존재하며, 특히 Cd(II)는 경작지토양에서 잠재적인 오염원인 것으로 판단된다. 층위에 따른 중금속의 농도는 그들의 흡착 특성에 영향을 받는 것으로 판단된다. 토양에 대한 중금속의 흡착 강도를 판단하기 위하여 0.1HCl$_{ext}$HNCL$_{dig}$의 값을 도입해보면, 그들의 흡착 강도는 Cu(II)>Zn(II)>Pb(II)>Cd(II)의 순으로 감소하였다. 경작지토양에서의 중금속 분포특성은 그들의 복잡한 이동특성 및 토지이용의 중요성 때문에 더욱 자세한 연구가 요구된다.

• 한국자원식물학회지
• /
• 제16권3호
• /
• pp.200-206
• /
• 2003

더덕 (Codonopsis lanceolata) 재배지에서 발생 빈도와 서식 밀도가 높은 식물기생선충을 파악하기 위하여 3개도 34개 지역 더덕 포장에서 조사한 결과 검출된 식물기생선충은 Meloidogyne(뿌리 혹선충), Pratylenchus(뿌리썩이선충)등 10개 속(genus)이었는데, 그 중 뿌리혹선충은 97%의 포장에서 검출되었고, 검출된 평균 선충수도 1,700마리/토양 300$m\ell$ 이상으로 대단히 높았다. 또 논 토양보다는 밭 토양에서 검출율이 높았고, 평균 밀도도 2,450마리로 10배정도 많았다.

• 드라이브 ㆍ 컨트롤
• /
• 제16권4호
• /
• pp.74-79
• /
• 2019

In this study, an edible fresh corn harvest testing machine was designed and manufactured. And harvesting performance was analyzed through the field test. The testing machine is of the tractor attached type. It is connected to the tractor PTO shaft to transfer power to the each part of the harvesting machine. And it harvests fresh corn by one row through the processes of cutting, stem crushing, detaching, and collecting. The performance test was performed at PTO speed (540, 750, 1050 rpm, respectively), working speed (0.1, 0.15, 0.2 m/s, respectively), and cropping cultivation (row spacing·hill spacing 70·25 cm, 70·40 cm, 90·30 cm, respectively). The performance test was repeated three times in the 15 m section. The detachment loss ratio, uncollected crop ratio, damage ratio, and harvest ratio were analyzed. As a result of the performance test, it was analyzed that the PTO speed 540 rpm, running speed of 0.1 m/s, and row spacing·hill spacing 70·40 cm were the optimal condition.

• 드라이브 ㆍ 컨트롤
• /
• 제21권2호
• /
• pp.23-29
• /
• 2024

Potatoes are one of the world's four major crops, and domestic consumption is currently increasing in Korea. However, the mechanization rate of potatoes is very low, and especially, harvesting is the most labor-intensive task in potato production. In Korea, potato-collecting work depends on manpower, so it is necessary to develop a gathering-type harvester that can be used for processes from digging to harvesting. Therefore, in this study, a self-propelled-type potato harvester was developed, and its performance was analyzed to mechanize harvesting. The potato harvester was developed to have a crawler-type driving part with a 60 hp diesel engine and consisted of a digging part that digs potatoes from the ground, a vertical transporting part that transfers the dug potatoes to the height of the collection bag, a separating part that separates debris, such as stones and soil, and a collecting part that loads the collection box. A field test of the potato harvester was conducted, and performance was evaluated by the damage, loss, and debris mixing proportions, which were 2.5%, 2.8%, and 2.6%, respectively. The working capacity was 1.2 h/10 a. The economic analysis results showed that the cost of harvesting work could be reduced by 12.7% compared to manual harvesting.