• 제목/요약/키워드: unsteady flow simulation

검색결과 462건 처리시간 0.019초

Effect on measurements of anemometers due to a passing high-speed train

  • Zhang, Jie;Gao, Guangjun;Huang, Sha;Liu, Tanghong
    • Wind and Structures
    • /
    • 제20권4호
    • /
    • pp.549-564
    • /
    • 2015
  • The three-dimensional unsteady incompressible Reynolds-averaged Navier-Stokes equations and k-${\varepsilon}$ double equations turbulent model were used to investigate the effect on the measurements of anemometers due to a passing high-speed train. Sliding mesh technology in Fluent was utilized to treat the moving boundary problem. The high-speed train considered in this paper was with bogies and inter-carriage gaps. Combined with the results of the wind tunnel test in a published paper, the accuracy of the present numerical method was validated to be used for further study. In addition, the difference of slipstream between three-car and eight-car grouping models was analyzed, and a series of numerical simulations were carried out to study the influences of the anemometer heights, the train speeds, the crosswind speeds and the directions of the induced slipstream on the measurements of the anemometers. The results show that the influence factors of the train-induced slipstream are the passing head car and tail car. Using the three-car grouping model to analyze the train-induced flow is reasonable. The maxima of horizontal slipstream velocity tend to reduce as the height of the anemometer increases. With the train speed increasing, the relationship between $V_{train}$ and $V_{induced\;slipstream}$ can be expressed with linear increment. In the absence of natural wind conditions, from the head car arriving to the tail car leaving, the induced wind direction changes about $330^{\circ}$, while under the crosswind condition the wind direction fluctuates around $-90^{\circ}$. With the crosswind speed increasing, the peaks of $V_X,{\mid}V_{XY}-V_{wind}{\mid}$ of the head car and that of $V_X$ of the tail car tend to enlarge. Thus, when anemometers are installed along high-speed railways, it is important to study the effect on the measurements of anemometers due to the train-induced slipstream.

2차원 부정류 모형을 이용한 둔치의 수리특성 분석 (Analysis of Hydraulic Characteristics of Flood Plain Using Two-Dimensional Unsteady Model)

  • 구영훈;송창근;김영도;서일원
    • 대한토목학회논문집
    • /
    • 제33권3호
    • /
    • pp.997-1005
    • /
    • 2013
  • 낙동강의 횡단면은 복단면 형태를 띄고 있으므로, 여름철 집중호우에 의해서 하천유량이 증가하면 둔치 상부까지 하천수위가 상승하는 특징이 있다. 또한 최근 강우강도 및 홍수 빈도의 증가로 인해 관련 피해가 급증하고 있으며, 이는 홍수터에 설치된 공원과 같은 친수시설들의 침수피해와 직접적으로 연관되므로, 극한강우 시 둔치에서의 수리학적 영향분석이 필요하다고 판단된다. 본 연구에서는 다양한 친수시설들이 조성되어 있는 강정고령보와 달성보 사이를 모의구간으로 선정하여 태풍 산바에 의해 첨두홍수량이 발생한 시점을 전후로 총 42시간에 걸친 수치모의를 실시하였다. 2차원 부정류 모형인 FaSTMECH 모의결과와 수위관측소에서 실측된 실측수위와 비교하여 모형의 적용성을 검토한 결과 $R^2$는 0.990, AME는 0.195, RMSE는 0.252로 높은 상관관계를 보였다. 그리고 검증된 FaSTMECH 모형을 이용하여 태풍 사상 시 홍수터 내에 위치해 있는 캠핑장과 생태공원 등과 같은 친수시설이 침수되는 시간 및 침수심, 침수 유속 및 전단력 등을 분석하였다.