• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.10a
• /
• pp.133-137
• /
• 2003

The shock absorber for vehicles is the important component to absorb the shock in driving. These essential components, piton and piston rod, must be made of S25C, S45C and SCM440 generally depending on kind of vehicles, precisely machined and assembled by the bolt. And it has been difficult to weld this sort of dissimilar materials. They could be unstable in the quality by the conventional arc welding. And also they have a lot of technical problems in manufacturing. But by the friction welding technique, it will be able to be made without such problems. These factors above necessitate nowadays the domestic development of the shock absorber by friction welding and a new approach of study on real-time quality evaluation by AE techniques.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.7
• /
• pp.1285-1293
• /
• 1992

The fracture behavior of glass/epoxy plain woven composite plates containing circular holes is experimentally investigated to examine the effects of hole size and specimen width on notched tensile strength. It is shown in this paper that the characteristic length according to the point stress criterion depends on the hole size and specimen width. For predicting the notched tensile strength, a modified failure criterion is developed. An excellent agreement is found between the experimental results and the analytical prediction of modified failure criterion. The notched strength and the characteristic length have an increase and decrease relations. When the unstable fracture occured, the critical crack length equivalent for the damage zone size at the edge of hole is about twice the characteristic length. The critical energy release rate G$_{c}$ is independent of hole size(0.03 .leq. 2R/W .leq. 0.5) under the same specimen width. However G$_{c}$ increases with an increase in specimen width which can be explained by stress relaxation due to the notch insensitivity.ity.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.12 no.3
• /
• pp.132-138
• /
• 1998

The dynamic analysis of stability in industrial power system is an important subject. In this paper, the effect of voltage dips for short duration (short-circuit) in the utility system on generators, synchronous motors of the industrial plant and the measures to be adopted to reduce the undesired effects of voltage dips re investigated. In the case of utility three-phase short-circuits of longer duration, both the generators and synchronous motors in the plant may become unstable. In order to avoid instability through fault clearing in the second zone time a decoupling device is necessary. The instability of voltage can be avoided with a well suited setting time of disconnecting device and load trip.

• Computers and Concrete
• /
• v.7 no.4
• /
• pp.387-402
• /
• 2010

From typical stress-axial strain curve and stress-volume strain curve of a concrete under uniaxial compression, the initiation and localization of microcracks within the interior of the specimen can be identified. The occurrence of random microcrack indicates the end of the linear elasticity, and the localization of microcrack implies formation of major crack, which triggers the onset of unstable crack propagation. The interval between initiation and localization of microcracks is characterized by a stable microcrack growth. Based on fracture behavior observed from a uniaxial compressive test of a concrete cylinder, a model has been developed to extract fundamental fracture properties of a concrete, i.e. the equivalent fracture toughness and the size of fracture process zone. The introduction of cracking Poisson's ratio accounts for tensile failure characteristics of concrete even under uniaxal compression. To justify the validity of the model proposed, tests on three-point bending have been performed to obtain the fracture toughness in accordance with two parameter fracture model and double-K fracture model. Surprisingly, it yields favorably comparable results and provides an encouraging alternative approach to determine fracture properties for concretes.

• Proceedings of KOSOMES biannual meeting
• /
• 2003.11a
• /
• pp.167-174
• /
• 2003

Oceanic conditions of the Tsushirm Wann Current (1WC) region in the southern area if the East Sea (the Japan Sea) are examined using data obtained from a CREAMS (Circulation Research if the East Asian Marginal Seas) cruise in June 1996. In 1990s, a lower temperature appears in $19\%$ and in this period, two branch of the TWC exist and the first branch of the TWC flows inshore if the Japanese coastal region compared to tfr1t in the other years, especially in the sfr1llower water layer at less th:1n about 2mm. The TWC cored with the higher salinity (>34.6 psu) is clearly observed over the continental shelf zone in the Japanese coastal region and offshore and identified by geostrophic calculation Intrusion if the TWC into the East Sea through the Korea Strait (the Tsushima Strait) makes the density structure in the water column change and the water mass in the TWC region is unstable based on Brunt- Vaisala frequency.

• Progress in Superconductivity and Cryogenics
• /
• v.7 no.1
• /
• pp.32-36
• /
• 2005

With the successful commercialization of Bi-2223 powder-in-tube wire , various attempts in the R & D of the high-Tc superconducting (HTS) magnets for high magnetic field applications are being implemented actively. Operating temperature of HTS magnet has to be maintained at the designed level but the magnetic energy and mechanical disturbance can cause unstable operational temperature of HTS magnet. Especially the generated heat energy of inner HTS winding Is apt to be accumulated . so the normal region appears in HTS winding. This paper deals with the quenching characteristics of three kinds of selected Bi-2223 wires : the High Current Density Wire (HC-A) and the High Strength Wire (HS-A) made by AMSC and HTS wire(HW-I) made by Innost The Innost wire has the highest minimum quench energy (MQE). The High Current Density Wire has the highest normal zone Propagation velocity (NZPV).

• ALGAE
• /
• v.22 no.3
• /
• pp.209-219
• /
• 2007

Marine algal flora and community structure of medicinal seaweeds were examined at Kkotji of Taean Peninsula, Korea from May 2005 to January 2006. Seventy-nine seaweeds including 42 medicinal algae and one marine plant were identified. Sargassum thunbergii was the representative alga occurred at all seasons and shore levels. The dominant medicinal seaweeds were perennial S. thunbergii, Neorhodomela aculeata, and Corallina pilulifera, and ephemeral Monostroma grevillei, Porphyra yezoensis, and Ulva pertusa. Their vertical distribution were N. aculeata – P. yezoensis, M. grevillei, and U. pertusa – C. pilulifera from high to low intertidal zone. The average biomass of medicinal seaweeds varied from 34.17 g m–2 in spring to 56.41 g m–2 in summer. At Kkotji shore, the opportunistic species (Enteromorpha, Ulva, and Cladophora) and turf-forming algae (Caulacanthus okamurae and Gelidium divaricatum) were easily observed. Such fast growing ESG II (ecological state group) was 87.50% and slow growing perennial algae, ESG I was only 12.15%. Also, diversity index (H’) and dominance index (DI) indicate that the seaweed community of Kkotji is unstable. Therefore, Kkotji rocky shore should be more protected from human activities such as turbulence and eutrophication in order to maintain species diversity and abundance of medicinal seaweeds.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.5
• /
• pp.767-772
• /
• 2012

Generally, abrasive fluid jet polishing system has been used for polishing of complex shape or freeform surface which has steep local slopes. In the system, abrasive fluid jet is injected through a nozzle at high pressure; however, it is inevitable to lose its coherence as the jet exits a nozzle. This problem causes incorrect polishing results because of unstable and unpredictable workpiece material removal at the impact zone. In order to solve this problem, MR fluid jet polishing method has been developed using a mixture of abrasive and MR fluid which can maintain highly collimated and coherent jet by applied magnetic field. Thus, in this study, an injection nozzle and an electromagnetic module, most important parts in the MR polishing system, were designed and verified by magnetic field and flow analysis. As the results of experiments, it can be confirmed that stable fluid jets for polishing were generated since smooth W-shapes and uniform spot size were observed regardless of standoff distance changes.

• Journal of Ocean Engineering and Technology
• /
• v.11 no.1
• /
• pp.24-35
• /
• 1997

The hydraulic or pneumatic valve spools become essential as the important components on the production of automatic hydraulic or pneumatic as mechanical industry has been rapidly developed. The machining precision is in necessity for manufacturing the valve spools. They could be unstable in the quality by the conventional are welding. And also they have a lot of technical problems in manufacturing because their shapes are generally small. By the precision casting process such as lost wax process, the production cost may be increased. But by the friction welding technique, they will be able to be manufactured without such problems. This paper deals with the development of dissimilar friction welding optimization for the hydraulic or pneumatic valve spool by friction welding and a new approach of on real-time qualify evaluation by AE techniques.

• Korean Institute of Interior Design Journal
• /
• v.13 no.5
• /
• pp.190-197
• /
• 2004

A kindergarten requires an approach to meet the nature and sense of children who is main users. This study selected 33 private kindergartens which were located within a housing site development zone in Gwangju since the 1990's, had single use, and was constructed in the last five years. Also the image assessment according to types of color scheme was made. Then the factors which affected preference by type were analyzed and the basic of color scheme in a kindergarten classroom was provided. The following results were obtained. First, types of color scheme in a classroom included identity 12.1%, similarity 51.5%, and novelty 36.4% in harmony, but no contrast and achromatic color, Secondly, the assessment of preference according to each type was mostly positive. The highest preference was found in similarity harmony of warm color(e.g. YR, Y) and bright, clear, nice, and strong images were high in assessment. The lowest preference was found in identity harmony of cold color(e.g. GY). This color system had no clear image assessment, except manly or strong. In particular, warm color showed higher preference than cold color in similarity, novelty, and identity harmony. Thirdly, the factors affecting the preference of color scheme in a classroom most were ‘stable - unstable’, ‘clean - dirty’, ‘bright - dark’, ‘nice - not nice’, and ‘vital - dull’.