• 한국산업융합학회 논문집
• /
• 제13권2호
• /
• pp.85-92
• /
• 2010

This study shows the path generation algorithm for an UGV (Unmanned Ground Vehicle). The developed UGV frame which has a 4-wheel driven mechanism and diesel source is applied. Proposed vehicle system in this research is aimed to military purpose. To achieve the unmanned autonomous driving, following two main issues are considered. First, behavior module for positioning and posture of vehicle system and second, cognition module to receive the information from environment are proposed and verified. To do this, rover which can acquire the positioning information from earth coordinate and IMU (Inertial Measurement Unit) which can measure the posture are combined to design the path planning algorithm.

• 대한토목학회논문집
• /
• 제44권3호
• /
• pp.417-423
• /
• 2024

This study compared and analyzed the importance of command priority between railway traffic controllers through pairwise comparison of AHP analysis. 27 railway traffic controllers working on metropolitan railway control center, urban railway control center, and unmanned driving control center responded. As a result of the analysis, all the railway traffic controllers generally recognized the train driving control and train signal control as the most important priorities. For the controller in the manned driving system, a train driving control was the highest at 0.375. On the other hand, the controller based on unmanned driving recognized train signal control as the highest priority at 0.469. In the result of the AHP analysis considering all the variables, the braking system was the highest priority at 0.19 based on manned train driving. On the other hand, the controller based on unmanned train driving recognized wired and wireless network systems and SCADA as the highest priority at 0.267.

• 한국융합학회논문지
• /
• 제12권7호
• /
• pp.1-6
• /
• 2021

현재, 코로나19등 바이러스 감염이 일상화 되어 있고, 비대면 ICT 서비스를 위한 분야에 무인시스템에 대한 관심이 증가하고 있다. 본 논문에서는 방송기능을 가진 IP PBX를 이용하여 원격으로 중, 소형 점포를 중앙에서 영상과 음성을 통해 성공적으로 관제할 수 있는 기능과 성능을 시험을 통하여 입증하였다. 현재 완전 무인 시스템은 여러 가지 기술적 문제로 신뢰성이 없지만, 본 논문에서 개발한 중앙관제시스템은 영상과 음성을 통해 관제사가 출입과 내부를 모니터링 함으로 직접 소비자를 관제할 수 있어 매우 효율적이고 신뢰를 할 수 있는 시스템이다. 향후에는 A.I 기술을 활용한 완전 무인 원격제어 시스템을 연구할 예정이다.

• 한국항공운항학회지
• /
• 제23권1호
• /
• pp.8-13
• /
• 2015

In this paper, a simple algorithm is proposed to estimate wind speed and direction which can significantly improve the landing performance of an unmanned parafoil. The proposed algorithm is applied to flight test data along with other known algorithms and the results are compared and discussed. The proposed algorithm shows comparable performance while it can still be applied to the parafoil under control.

• Journal of Positioning, Navigation, and Timing
• /
• 제9권2호
• /
• pp.131-138
• /
• 2020

In this paper, we analyze the delay phenomenon that can occur when controlling an unmanned aerial vehicle using a camera and describe a solution to solve the phenomenon. The group of pictures (GOP) value is changed in order to reduce the delay according to the frame data size that can occur in the moving image data transmission. The appropriate GOP values were determined through experimental data accumulation and validated through camera self-test, system integration laboratory (SIL) verification test and system integration test.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2018년도 춘계학술대회
• /
• pp.515-517
• /
• 2018

변전소, 댐, 철도 등과 같은 공공시설들의 출입은 매우 엄격하제 관리되어 있으며 최근에는 IT기술의 발전과 정부의 비용절감정책으로 무인감시설비가 도입되어 운영되고 있다. 그러나 무인감시설비에 고장이 발생되면 감시 공백과 침입자에 의한 정보유출과 시설파손 등의 피해가 발생할 수 있다. 또한 감시설비의 점검을 위해서는 관리자의 주기적 방문점검이 필요하며 이로 인해 추가적인 관리비용이 발생되는 문제점을 갖고 있다. 이를 해결하기 위해 본 논문에서는 무인감시설비의 동작 상태를 실시간 점검하여 문제 발생 시 자동복구를 시도하고 관리자에게 이를 통보하는 시스템을 설계하였다. 설계된 시스템은 영상, 음향, 조명 상태 등의 정보를 수신하고 판단하는 NVR과 무인감시설비의 상태를 감지하고 복구를 시도하는 제어장치로 구성되어 있다. 본 논문에서 제안된 시스템을 이용하여 무인감시설비의 고장으로 인한 감시공백 최소화와 점검비용의 감소로 인한 경제성 향상에 기여할 것으로 기대된다.

• 대한임베디드공학회논문지
• /
• 제3권3호
• /
• pp.126-135
• /
• 2008

The development of an unmanned vehicle basically requires the robust and reliable performance of major functions which include global localization, lane detection, obstacle avoidance, path planning, etc. The implementation of major functional subsystems are possible by integrating and fusing data acquired from various sensory systems such as GPS, vision, ultrasonic sensor, encoder, and electric compass. This paper focuses on implementing the functional subsystems, which are designed and developed by a graphical programming tool, NI LabVIEW, and also verifying the autonomous navigation and remote control of the unmanned vehicle.

• 제어로봇시스템학회논문지
• /
• 제16권9호
• /
• pp.898-904
• /
• 2010

Unmanned autonomous forklifts have a great potential to enhance the productivity of material handling in various applications because these forklifts can pick up and deliver loads without an operator and any fixed guide. There are, however, many technical difficulties in developing such forklifts including localization, map building, sensor fusion, control and so on. Implementation, which is often neglected, is one of practical issues in developing such an autonomous device. This is because the system requires numerous sensors, actuators, and controllers that need to be connected with each other, and the number of connections grows very rapidly as the number of devices grows. Another requirement on the integration is that the system should allow changes in the system design so that modification and addition of system components can be accommodated without too much effort. This paper presents a network-based distributed approach where system components are connected to a shared CAN network, and control functions are divided into small tasks that are distributed over a number of microcontrollers with a limited computing capacity. This approach is successfully applied to develop an unmanned forklift.

• 항공우주시스템공학회지
• /
• 제13권6호
• /
• pp.36-42
• /
• 2019

본 논문은 유/무인 항공기 복합운용체계 검증을 위한 시뮬레이션 환경 구축 및 통합 시험에 대하여 다룬다. 유/무인 항공기 지상 시뮬레이션 환경 구축을 위해서 유인기용 시뮬레이터인 X-Plane과 무인기용 시뮬레이터 HILS를 연동하여 상호 복합운영이 가능한지 시뮬레이션으로 검증하였다. 실제 비행시험 전 유/무인 항공기 및 지상통제실 간 C Band 및 UHF 채널을 이용한 통신 가능성을 확인하기 위하여 통신장비를 제작하고 유인 항공기를 이용한 검증을 수행하였다.

• International Journal of Computer Science & Network Security
• /
• 제21권3호
• /
• pp.145-152
• /
• 2021

In the Recent times, various technological enhancements in the field of artificial intelligence and big data has been noticed. This advancement coupled with the evolution of the 5G communication and Internet of Things technologies, has helped in the development in the domain of smart mine construction. The development of unmanned vehicles with enhanced and smart scheduling system for open-pit mine transportation is one such much needed application. Traditional open-pit mining systems, which often cause vehicle delays and congestion, are controlled by human authority. The number of sensors has been used to operate unmanned cars in an open-pit mine. The sensors haves been used to prove the real-time data in large quantity. Using this data, we analyses and create an improved transportation scheduling mechanism so as to optimize the paths for the vehicles. Considering the huge amount the data received and aggregated through various sensors or sources like, the GPS data of the unmanned vehicle, the equipment information, an intelligent, and multi-target, open-pit mine unmanned vehicle schedules model was developed. It is also matched with real open-pit mine product to reduce transport costs, overall unmanned vehicle wait times and fluctuation in ore quality. To resolve the issue of scheduling the transportation, we prefer to use algorithms based on artificial intelligence. To improve the convergence, distribution, and diversity of the classic, rapidly non-dominated genetic trial algorithm, to solve limited high-dimensional multi-objective problems, we propose a decomposition-based restricted genetic algorithm for dominance (DBCDP-NSGA-II).