• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.34 no.2
• /
• pp.117-134
• /
• 1998

The study on the Assembling Mechanism of the Hairtail, Trichiurus lenpturus, at the Fishing Grounds of the Cheju Strait had been investigated by analyzing the relationship of the oceanographic conditions and the fishing ground of the Hairtail in the Cheju Strait. 1. The fishing grounds of the hairtail at the Cheju Strait are formed at the bottom of a high temperature of the tidal front at the coast. area of northern Cheju Island, the tip of the linguiform is high in salinity at the eastern and western entrances of Cheju Island, low salinity eddy on the surface and its surrounding front, various water masses in the Strait and coastal waters of the South Sea in Korea. 2. The fishing grounds of the Hairtail at the Cheju Strait begins with the sea surface temperature higher than $15^{\circ}C$ and the incoming of low salinity water now from the East China Sea. 3. Estimation of optimum temperature and salinity per season based upon analysis for relationship between temperature of water and salinity of the bottom layer and the catch is : 15.2~$16.4^{\circ}C$, 34.20~34.40${\textperthousand}$ in spring(June); 14.4~ $17.0^{\circ}C$, 33.70~34.30${\textperthousand}$ in summer(July~September); and 15.7~ $18.6^{\circ}C$, 33.70~34.50$\textperthousand$ in autumn(October~December). Hairtail are mostly caught at the Yellow Sea Warm Current and Tsushima Current with temperature over $14.5^{\circ}C$ and salinity over 33.70${\textperthousand}$ at the bottom layers of the Cheju Strait. 4. Considering the relationship between the amount of hairtail catch and the water temperature of bottom layer, when the bottom water being above $14.0^{\circ}C$ flowed into Cheju Strait through the western entrance of the strait in summer, the ca-h appears to have been abundant. In contrast, the catch has been poor when the temperature of such water was recorded to be below $13^{\circ}C$ Therefore, distribution patterns of water at the bottom layer can be used as a forecast index whether the catch of a certain year will be good or poor.

• Journal of The Korean Association For Science Education
• /
• v.20 no.4
• /
• pp.572-581
• /
• 2000

Teachers' perceptions about curricular objectives are very important to achieve given educational objectives. This study examined teachers' perceptions about priority and hinderance of science objectives. The national science curriculum stated four areas of objectives: inquiry, knowledge, attitude, and STS. A total of 76 elementary and 217 secondary teachers were responded to questionnaire developed for this study. Non-parametric statistics, such as Friedman test, Kruskal-Wallis test, and chi-square test were used by using SPSS/PC program. Teachers in general ranked the inquiry first among the four areas at their perception on the national curriculum, on themselves, and on their instructions. Elementary teachers ranked inquiry higher than secondary science teachers, while secondary science teachers ranked knowledge higher than elementary teachers. As factors hindering teachers from achiving the objectives, elementary teachers pointed out overcrowded classroom and secondary science teachers pointed out college and university entrance examination respectively.

• Polymer(Korea)
• /
• v.35 no.5
• /
• pp.467-471
• /
• 2011

PET bottle is manufactured by blow molding the preform, which is molded by injection molding. The neck part of the preform of PET bottle for juice or grain-based beverage is crystallized before blowing to improve heat resistance at the entrance of the bottle. However, residual stress, developed during injection molding of preform, prevents the crystallization. In order to release the residual stress in the preform, the preform is annealed after the injection molding. If the residual stress is reduced by optimizing the injection molding conditions of preform the annealing time would be shortened. In this study, the optimum conditions for minimizing the residual stress and increasing dimensional accuracy of the injection molded preform are suggested through CAE analysis. In order to optimize the molding conditions, minimizing residual stress and shrinkage, computer simulations have been carried out with help of design of experiment scheduling. Injection temperature, initial packing pressure and filling time were selected for control parameters. Residual stress was affected by injection temperature and filling time. Shrinkage was affected by injection temperature. It was found that maximum residual stress, distribution of residual stress and shrinkage were decreased by 22%, 40% and 25%, respectively at an optimum molding condition compared with the results of previous molding condition.

• The Korean Journal of Zoology
• /
• v.8 no.2
• /
• pp.89-127
• /
• 1965

1. This report is on the outcome of observation made up the breeding process of Narcissus flycatcher, Muscicapa narcissina zanthopygia, using 15 ness-boxes at Seoul and Kwang Nung Experimental forest in 1964, and the relevant feeding habit was studied by the collar method of wrapping the necks of thenestlings for 50-60 minutes or more in some cases from 1963 to 1964. 2. The Narcissus flycatcheris a common summer resident throughout Korea arriving at the end of April. The earliest data of arrival of this species in Seoul, is April 26, 1964. They migrate southward from the later part of September to early part of October. 3. In a week after their arrival , they start to build nest after a brief courtship. Male and female prepare their nest ina nestboxes in 4 or 5 days. Nests are usually found in the moss, which provide definite frame-work. The inner side of the nest is usually composed of roots of Gramineae or leaves of pine, oak or other broad leave tree. 4. The laying period is generally from the later part of April to the middle of June : and the number of eggs laid is from 3 to 8 , therefore 5 in average : eggs are pink with traces of milky yellow blending of light auburn and orange red spots and chicken-egg-like in shape. 5.The incubation takes place for 7-12 days from the middle part of May to the middle of June, in the order of male and female . The hatching rate tends to increase in proportion to clutch size. 6. The feeding period usually lasts 15 days in average from the early part of June to the middle of July and the feeding urge tends to increase in proportion to brood size. 7. The animals invading into their nest-boxes are red ants, chipmunks, bees , barkbeetles and philippine red-tailed shirkes, etc. 8. On the basis of analysis covering 714 birds in 31 nests, the food they consumed during the nesting period of nestlings were mostly of animal matters composing of : insect larvae form-39. 88% insect adult form 36.26%, insect pupae-0.19%, spider-17.75% and other animal matters 5.92% , Besides a small amount of plant pieces were found . As to the insect larvae, Lepidoptera was the largest in the content followed by Hymenoptera , Orthoptera and Coleoptera. As to the insect adult, Diptera was the largest in the content followed by Coleoptera, and Hymenoptera. In view of forest protection, noxious insect was of 69.38%, useful insect 4.39%, and spider 17.75%. 9. The rich assortment of its food, the ability of acquiring various insect (adults as well as larvae), its destruction of great numbers of harmful insects , and its quick assimilation artificial nesting with the nest-boxes of 2.5-3cm entrance hole employed, allow us to conclude that the flycatcher may be successfully employed in the elimination of fores pests. The above results are only that part obtained near Seoul in the middle of Korea, however, if we would extend the scheme to other broad areas using similar techniques, the nest-boxes could not only be well used by the birds, but also it would help to prevent the increase of harmful. insects.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.19 no.2
• /
• pp.213-229
• /
• 2017

Recently, in urban areas there is a tendency to construct more complex network-type tunnels including entrance and exit ramps. At the same time, various one-dimensional programs based on the network theory have been proposed for tunnel ventilation analysis. This paper aims at developing a program that can analyze the ventilation flow rate and pollutants concentration in complex network-type tunnels based on the none hardy-cross method. The flow analysis in the branch was carried out on the basis of the Gradient method, while for the concentration analysis a new logic has been developed to calculate the inflow and outflow concentration automatically in a complex network-type structure. Additionally, in the tunnel segments showing low flow rate, proper grid interval sizes were proposed to reduce numerical error. To verify the applicability of the program, flow rates predicted in the straight tunnels were compared with the classical velocity-diagram method by Stokic and the TVSDM program. The results showed that the errors were within 1%. In addition, the program was applied to the recent ventilation system adopted in the complex network-type urban tunnels.

• Journal of IKEEE
• /
• v.19 no.2
• /
• pp.168-175
• /
• 2015

In this paper, we propose FPGA design technique for rotating LED display device which is capable of displaying videos with the use of the afterimage effect. The proposed technique is made up of image data correction process based on inverse gamma correction and error diffusion, block interleaving process, and data serial output process. The data correction process based on inverse gamma correction and error diffusion is an image data correction step in which image data received are corrected by inverse gamma correction process to convert the data into linear brightness characteristics, and by error diffusion process to reduce the brightness reduction phenomenon in low-gray-level which is caused by inverse gamma correction. In the block interleaving process, the data of the frames entered transversely are first saved in accordance with entrance order, and then only the longitudinal image data are read. The data serial output process is applied to convert the parallel data in a rotating location into serial data and send them to LED Driver IC, in order to send data which will be displayed on high-speedy rotating LED Bar. To evaluate the accuracy of the proposed FPGA design technique, this paper used XC6SLX45-FG484, a Spartan 6 family of Xilinx, as FPGA, and ISE 14.5 as a design tool. According to the evaluation analysis, it was found that goal values were consistent with simulation values in terms of accurate operation of inverse gamma and error diffusion correction, block interleaving operation, and serialized operation of image data.

• Clean Technology
• /
• v.14 no.3
• /
• pp.176-183
• /
• 2008

The purpose of this study is to upgrade the catalysts for synthesizing mixed octenes using normal butene and the catalysts for synthesizing $C_9$-aldehyde through hydroformylation of mixed octenes with syngas. The in-line activation method with circulating activating solution was effective for activation of the $NiO/A1_{2}O_3$ catalyst. The reason for catalyst deactivation may be ascribed to physi-sorbed materials or oligomers which block pore entrance and then prevent active sites from participating a reaction. Continuous distillation apparatus was used for separating mixed octenes from dimerization products. When reflux ratio was above 3 : 1, mixed octene fraction of which purity was above 99.57% was obtained. In $C_9$-aldehyde synthesis through hydroformylation of mixed octenes, we investigated a performance of ligand which increased catalyst stability as well as activity of Co catalyst. The results indicated that TPPO, NMP, NDMA, and succinonitrile were suitable ligand for increasing initial activity and reducing loss of Co during catalyst recovery.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.28 no.3
• /
• pp.39-52
• /
• 2010

The royal tombs of the Joseon dynasty are very important cultural heritage with the palaces and Jongmyo. They being promoted as World Heritage of UNESCO and are archaeological sites that need to complex approach. The purpose of this study is to propose the restoration plan of Ureung Gunreung. The results are as follows: First. In the area of Ureung Gunreung, there are many land-use except the royal tombs such as a new town development site and industrial districts, cultural assets districts, They have to be removed and new routes have to be established same as the original form. Second The traditional trees such as a pine tree, a fir tree, a big cone pine and a rhododendron etc. have to be planted In the traditional forest We introduce upper trees and lower trees in the entrance part and religious service part, and pine tree forest in burial mound part and maintain the lawn. Third, The traditional buildings and facilities such as Jaesil, Subokbang have to be restored maintained, and we planed some convinient facilities and rest facilities for visitors.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.28 no.4
• /
• pp.105-111
• /
• 2010

This research aims to grasp the main factors of the image of Xi'an Ming City Wall Park and the harmony level with city walls and moat based on citizen's consciousness to improve the future design, field survey and the POE method are employed to analyze the image factor and harmony level of the Xi'an Ming City Wall Park. In the literature survey, the related materials were collected to obtain the most useful information for references, POE study of the Xi'an Ming City Wall Park were conducted. The instrument for survey is a questionnaire that includes a portion of questions regarding Xi'an Ming City Wall Park and the design intention of the surroundings of city wall. Data were analyzed using the Statistical Package for the Social Science (SPSS17.0 for Windows). Multiple regression analysis, and correlation analysis were employed along with the use of general descriptive data analysis. The factor analysis of the image of Xi'an Ming City Wall Park identified three factors, "environment" factor, "convenience" factor, "cultural aesthetics" factor, and the most important factor is "environment" factor. Among 14 landscape elements, paving, garden architectures and entrance spaces were identified as important variables which significantly affect the overall level of harmony with the city wall, and the space for rest; waterscape and paving were identified as important variables which significantly affect the overall level of harmony with the moat.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.36 no.3
• /
• pp.75-87
• /
• 2018

The purpose of this study is to investigate conservation and management methods of the Joseon Royal Tombs under the Eastern District Management Office. Through the literature survey, we understood the process of change of Joseon royal tombs, and through field surveys and interviews, we understood the status of the interior and the surrounding area. In this process, topography, land use and flow of human traffic, architecture and stone objects, water system, historical forests, and facilities were set as the main evaluation indicators. Urbanization has damaged the original terrains of Royal Tombs as national roads, buildings and facilities have constructed in the inner and outer area of Joseon Royal Tombs. Construction of underground passage, land purchase, relocation and demolition of the buildings are required for the conservation of the Royal Tombs area, and then it is necessary to recover the original terrain. In the case of land use and pathways, there are many disconnection of the original ritual circulation, they should be maintained to remind the sacred atmosphere of the royal tomb. And It is necessary to collect accurate information on the lost buildings and stoneworks through literature survey and excavation investigation, and that investigations should be lead to the exposure or restoration of the ruins. Historical forests require periodic and ongoing monitoring and management, and it is necessary to establish new entrance area and appropriate facilities following the long-Term conservation and management plan. These plans should be classified into short, medium and long-Term projects according to urgency and securing financial resources with a long perspective to implement continuous and systematic projects.