• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.408-417
• /
• 2022

Although traditionally perceived as being a visualization and asset management resource, the relatively rapid rate of improvement of computing power, coupled with the proliferation of cloud and edge computing and the IoT has seen the expanded functionality of modern Digital Twins (DTs). These technologies, when applied to buildings, are now providing users with the ability to analyse and predict their energy consumption, implement building controls and identify faults quickly and efficiently, while preserving acceptable comfort and well-being levels. Furthermore, when these building DTs are linked together to form a community DT, entirely new and novel energy management techniques, such as demand side management, demand response, flexibility and local energy markets can be unlocked and analysed in detail, creating circularity in the economy and making ordinary building occupants active participants in the energy market. Through the EU Horizon 2020 funded TwinERGY project, three different levels of DT (consumer - building - community) are being created to support the creation of local energy markets while optimising building performance for real-time occupant preferences and requirements for their building and community. The aim of this research work is to demonstrate the development of this new, interrelated, multi-level DT that can be used as a decision-making tool, helping to determine optimal scenarios simultaneously at consumer, building and community level, while enhancing and successfully supporting the community's management plan implementation.

• Smart Structures and Systems
• /
• v.4 no.1
• /
• pp.85-98
• /
• 2008

In this paper, excitation systems using a linear mass shaker (LMS) and an active tuned mass damper (ATMD) are presented to simulate the wind induced responses of a building structure. The actuator force for the excitation systems is calculated by using the inverse transfer function of a target structural response to the actuator. Filter and envelop functions are used to prevent the actuator from exciting unexpected modal responses and an initial transient response and thus, to minimize the error between the wind and actuator induced responses. The analyses results from a 76-story benchmark building problem for which the wind load obtained by a wind tunnel test is given, indicate that the excitation system installed at a specific floor can approximately reproduce the structural responses induced by the wind load applied to each floor of the structure. The excitation system designed by the proposed method can be effectively used for evaluating the wind response characteristics of a practical building structure and for obtaining an accurate analytical model of the building under wind load.

• International Journal of High-Rise Buildings
• /
• v.4 no.1
• /
• pp.1-8
• /
• 2015

A team of researchers and practitioners were recently assembled to prepare a monograph on "Wind-Induced Motion of Tall Buildings: Designing for Habitability". This monograph presents a state-of-the-art report of occupant response to wind-induced building motion and acceptability criteria for wind-excited tall buildings. It provides background information on a range of pertinent subjects, including: ${\bullet}$ Physiological, psychological and behavioural traits of occupant response to wind-induced building motion; ${\bullet}$ A summary of investigations and findings of human response to real and simulated building motions based on field studies and motion simulator experiments; ${\bullet}$ A review of serviceability criteria to assess the acceptability of wind-induced building motion adopted by international and country-based standards organizations; ${\bullet}$ General acceptance guidelines of occupant response to wind-induced building motion based on peak acceleration thresholds; and ${\bullet}$ Mitigation strategies to reduce wind-induced building motion through structural optimization, aerodynamic treatment and vibration dissipation/absorption. This monograph is to be published by the American Society of Civil Engineers (ASCE) and equips building owners and tall building design professionals with a better understanding of the complex nature of occupant response to and acceptability of wind-induced building motion. This paper is a brief summary of the works reported in the monograph.

• KIEAE Journal
• /
• v.15 no.5
• /
• pp.95-105
• /
• 2015

Purpose: This paper presents a framework development for BIM (Building Information Modeling)-based OOPM (Object-Oriented Physical Modeling) for Building Thermal Simulation. The framework facilitates decision-making in the design process by integrating two object-oriented modeling approaches (BIM and OOPM) and efficiently providing object-based thermal simulation results into the BIM environment. Method: The framework consists of a system interface between BIM and OOPM-based building energy modeling (BEM) and the visualization of simulation results for building designers. The interface enables a BIM models to be translated into OOPM-based BEM automatically and the thermal simulation from the created BEM model immediately. The visualization module enables the simulation results to be presented in BIM for building designers to comprehend the relationships between design decisions and the building performances. For the framework implementation, we utilized the Modelica Buildings Library developed by the Lawrence Berkeley National Laboratory as a thermal simulation solver. We also conducted an experiment to validate the framework simulation results and demonstrate our framework. Result: This paper demonstrates a new methodology to integrate BIM and OOPM-based BEM for building thermal simulation, which enables an automatic translation BIM into OOPM-based BEM with high efficiency and accuracy.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.10
• /
• pp.969-976
• /
• 2004

Building energy saving is one of the most important issues in these days. Energy saving control strategies should be developed properly to achieve the saving. One of such area we could apply is the HVAC (Heating, Ventilation and Air-Conditioning) system. Through the optimal control algorithm for building energy management system (EMS), you can not only save the cost of building energy, but also protect HVAC system components against the unexpected condition. In order to verify the effectiveness of building energy saving, field test was accomplished for several months at 'A' building. And to get the measured data, remote control was used. If the remote control is used in BAS (Building Automation System), control and monitoring can be done for all of the building systems, such as HVAC, power, lighting, security and fire-alarm etc. anywhere any time. Using the remote control, Control and monitoring is possible for the testing system without going there. As the results of field test, we could reduce $5{\sim}10\%$ of the building energy cost.

• Architectural research
• /
• v.21 no.3
• /
• pp.69-77
• /
• 2019

Architects are facing increasing risks that result from heightened expectations of benefits and performance when designing green buildings compared to traditional buildings. This study aims to explore the possible risk factors for architects in green building projects in South Korea and assess risk mitigation measures. To attain this goal, 14 risk factors and 12 mitigation measures were determined through an extensive literature review. A questionnaire was administered to architects practicing green building design and criticality index was employed to assess major risk factors and mitigation measures. This study identified 'adoption of new technology and process', 'green building certification results', 'building products and materials', and 'energy saving uncertainty' as the major risk factors of green building projects. Additionally, the questionnaire proposed 'contract indicating each party's role, liability, and limitations clearly', 'utilizing integrated design process', and 'understanding client's goal in green building projects' as the three most effective risk mitigation measures in designing green buildings. There are few studies that focus on architects' perceived risks concerning green building projects; this study contributes to a deeper knowledge and attempts to fill the current literature gap, which would benefit South Korea's green building design practice by aiding in the development of better risk management strategies.

• Journal of the Korean Solar Energy Society
• /
• v.30 no.1
• /
• pp.50-60
• /
• 2010

Today, the amount of energy consumption in the university campuses is huge. The effort for the energy consumption reduction in university campuses is certainly needed by the following reason; first, contribution to the greenhouse gas discharge reduction demand. Second, energy cost reduction in university campus. Third, contribution to the improvement of the social awareness as the maximum higher educational institutions. The energy consumption analysis of current situation has to be executed for the energy consumption reduction in university campus. The energy reduction possibility in which it exists in university campuses can be understood through the energy consumption analysis. And the application is possible as fundamental data of the policy establishment for the effective energy reduction in university campuses. Especially, the best way to reduce the energy consumption in university campuses that is the energy consumption reduction of buildings. Accordingly, this study derived the plans for improving the performance of energy in the university building by analyzing case study, so this study analyzed the performance of energy for the university building through VE, a program for the analysis of building energy. Based on this result, this study classified the plans improving the efficiency of energy in university building into the plan for passive control and active control respectively, and suggested some concrete plans, and finally evaluated the performance of decreasing energy consumption for each plan.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.513-517
• /
• 2015

Green construction has increasingly become a popular concept and standardization in the world. This paper presents an overview of a Vietnamese green building rating tool named LOTUS. This paper also presents some major similarities and differences between LOTUS and other well-known green rating tools. The interviews with some experts and practitioners about Green buildings in Vietnam have twofold aims. One is to help better understand the causes of the differences under practitioners' viewpoints. The second aim is to uncover the opportunities and the difficulties that the project stakeholders may encounter upon the implementation of Green Building construction projects in Vietnam.

• Nutrition Research and Practice
• /
• v.9 no.2
• /
• pp.174-179
• /
• 2015

BACKGROUND/OBJECTIVES: The relationship between food intake and nutritional status has been clearly established. Yet, there are only limited studies on food intake among family members and their nutritional status. The study examined the relationship between intra-household food distribution and coexistence of dual forms of malnutrition (DFM) in the same household. SUBJECTS/METHODS: Households with a malnourished child and overweight mother were categorized as DFM. Intra-household food distribution among family members was reported using ratios, which are a measure of individual intakes as compared to all household member intakes adjusted to RDA. RESULTS: A1,899 families were included in the study. The prevalence of DFM was 29.8% (95%CI 26.5-31.2). Children consumed lower amounts of energy (OR 1.34; 95%CI 1.06-1.69, P = 0.011), carbohydrates (OR 1.2; 95%CI1.03-1.61, P = 0.022), protein (OR 1.3; 95%CI 1.03-1.64, P = 0.026), and fat (OR 1.3; 95%CI 1.05-1.66, P = 0.016) than their mothers and other family members. In contrast, mothers consumed more carbohydrates than children and other family members (OR1.24; 95%CI 1.02-1.51, P = 0.03). CONCLUSIONS: This study is the first to report on the food distribution among family members and its relationship with occurrence of DFM in Indonesia. The results confirm the occurrence of an unequal food distribution between children and mothers, which increases risk of DFM in the household. The results also demonstrate that nutritional education at the household level is important to increase awareness of the impact of DFM.

• Architectural research
• /
• v.16 no.4
• /
• pp.203-210
• /
• 2014

The packaged terminal air conditioner, the typical cooling system for the residential buildings, consumes a large amount of electricity in a short period time during peak hours. In order to reduce the peak load and conserve the electricity, the thermally activated building system can be used as a secondary system to handle the partial cooling load. However, the thermally activated building system may cause condensation and under-cooling. Thus, design of both systems should be performed with careful investigation in characteristics of both systems to amplify the advantages. Since the thermally activated building system has the time-delay effect which may cause under-cooling, the system is designed to handle the base load of the building. Hence, simple simulation with EnergyPlus was performed to observe the characteristics of cooling load in residential buildings. Once the possible range of the load handling ratio of the thermally activated building system was decided, characteristics of system was analyzed in terms of hardware component and operation parameters. The hardware components were analyzed in plant and system aspects and the operation parameter was evaluated in the thermal comfort aspect. As the load handling ratio increased, the thermal comfort increased due to the lower radiant mean temperatures. Within the range of thermal comfort, the several adjustments were made in setpoint temperature and electricity consumptions of difference cases were observed to decide which components and parameters were important for designing the systems.