• Journal of Positioning, Navigation, and Timing
• /
• v.6 no.3
• /
• pp.95-104
• /
• 2017

Positioning signals transmitted by Global Positioning System (GPS) satellites located at approximately 20,000 km height is very weak. For the reason, GPS signals are vulnerable to intentional jamming and unintentional disturbance. Recently, the number of jamming has been increased significantly all over the world. For the applications where continuous and reliable positioning is required when GPS jammers are activated, other positioning systems are strongly required. In this work, a set of Time Division Multiple Access (TDMA)-based transmitters and receivers utilizing Universal Software Radio Peripheral (USRP) and GNU Radio are designed and implemented. To eliminate the undesirable effects of GPS jamming, a frequency band which does not overlap L band is utilized. To demonstrate the accuracy of the proposed method, an experiment was performed.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2646-2648
• /
• 2001

In this paper, the development of Power Line Communication(PLC) device for white goods is presented. The commercial PLC chip-set is used for the modem device of white goods. As a PLC device for white goods, an ARM720 u-controller and a windows CE 3.0 are adopted. UPnP (Universal Plug and Play) that is applied for home network middle ware in implemented system. In addition, application programming and emulator for home appliance are implemented using UPnP standard ver 1.0.

• Journal of Information Technology Applications and Management
• /
• v.24 no.3
• /
• pp.73-92
• /
• 2017

Usability is one of the most important concepts regarding software quality. It can be interpreted as the goodness associated with using the software product. This paper distinguishes the goodness of an individual using experience and the goodness of a product for using. This paper proposes a software quality view model which classifies software quality views into two broad categories of end view and means view. End view includes long-term view and short-term view which is classified further into performer's view on software activity and third party's view on software activity. Means view includes intrinsic view and contingency view. The analysis of ISO 25000 Series SQuaRE demonstrates the necessity to decompose product quality model and quality in use model into five models corresponding to the software quality views respectively. The analysis on playability shows that the universal definition of usability may be an illusion. The results provide the theoretical basis to build a comprehensive and consistent body of knowledge regarding software quality, which is consisted with the set of quality models and the theories explaining the relationships among the elements of the models.

• Korean Institute of Interior Design Journal
• /
• v.21 no.3
• /
• pp.76-86
• /
• 2012

21st century has different characters from 20th century which was an era of machine and rationality based on the industrial revolution. With the advent of the digital revolution, it became an era of pluralism, culture, and emotion. The digital technology made it possible to connect the whole world together in real time and brought about the entirely new notion of time and space. It also dramatically altered the world view. Now we have a different set of social and cultural values from the past. This paper researched the influences of these social and cultural changes on public designs. The leading trends of public designs were analyzed and the successful cases were studied. The main research methodologies were the document review and the instrumental case study. The major social & cultural paradigms of a present era were classified as 'pluralism', 'digital & information revolution', 'human-centered value (against machine-centered value of 20th century)', and 'organic world view'. Each of the classified paradigms was analyzed more to find out the influences on the various trends of public designs. 'Pluralism' has influence on 'experiential public design', 'community art', and 'public design of local values'. 'Digital & information revolution' has influence on 'content-centered public design', 'smart public design', 'immaterial public design', and 'performance in public design'. 'Human-centered value' has influence on 'universal design approach in public design', and 'emotional public design'. 'Organic world view' has influence on 'sustainable public design', and 'ecological public design'.

• Journal of Positioning, Navigation, and Timing
• /
• v.7 no.4
• /
• pp.189-203
• /
• 2018

In this paper, a Software Defined Radio (SDR) architecture was designed and implemented for rapid prototyping of GNSS receiver. The proposed SDR can receive various GNSS and direct sequence spread spectrum (DSSS) signals without software modification by expanded input parameters containing information of the desired signal. Input parameters include code information, center frequency, message format, etc. To receive various signal by parameter controlling, a correlator, a data bit extractor and a receiver channel were designed considering the expanded input parameters. In navigation signal processing, pseudorange was measured based on Coordinated Universal Time (UTC) and appropriate navigation message decoder was selected by message format of input parameter so that receiver position can be calculated even if SDR is set up various GNSS combination. To validate the proposed SDR, the software was implemented using C++, CUDA C based on GPU and USRP. Experimentation has confirmed that changing the input parameters allows GPS, GLONASS, and BDS satellite signals to be received. The precision of the position from implemented SDR were measured below 5 m (Circular Error Probability; CEP) for all scenarios. This means that the implemented SDR operated normally. The implemented SDR will be used in a variety of fields by allowing prototyping of various GNSS signal only by changing input parameters.

• International Journal of Computer Science & Network Security
• /
• v.22 no.12
• /
• pp.125-131
• /
• 2022

The diversity and complexity of criminal, administrative and civil cases resolved by the courts makes it difficult to develop universal automated tools for the analysis and evaluation of justice. However, big data generated in the scope of justice gives hope that this problem will be resolved as soon as possible. The big data applying makes it possible to identify typical options for resolving cases, form detailed rules for the individualization of a court decision, and correlate these rules with an abstract provisions of law. This approach allows us to somewhat overcome the contradiction between the abstract and the concrete in law, to automate the analysis of justice and to model e-justice for scientific and practical purposes. The article presents the results of using dimension reduction, SHAP value, and p-value to identify, analyze and evaluate the individualization of justice and the differentiation of legal regulation. Processing and analysis of arrays of court decisions by computational methods make it possible to identify the typical views of courts on questions of fact and questions of law. This knowledge, obtained automatically, is promising for the scientific study of justice issues, the improvement of the prescriptions of the law and the probabilistic prediction of a court decision with a known set of facts.

• Journal of Mushroom
• /
• v.22 no.2
• /
• pp.48-52
• /
• 2024

This study investigated the microscopic characteristics and genetic relationships of Ganoderma applanatum fruiting bodies. Basidiospores were brown, ellipsoid, and had one or two large vacuoles and a double wall. The surface of basidiospores was smooth or wrinkled and most had numerous small and shallow holes. The length and width of basidiospores of Ganoderma applanatum isolates GBGA-01, GBGA-02, ASI 50167, ASI 52821, ASI 52822, ASI 52823, and ASI 53399 were on average 7.6×4.8 ㎛, 7.9×4.6 ㎛, 7.7×4.9 ㎛, 8.2×5.3 ㎛, 7.7×5.0 ㎛, 8.0×4.9 ㎛, and 7.9×4.9 mm, respectively. In contrast, the basidiospores of Ganoderma lucidum isolate ASI 7125 were 7.7×5.2 ㎛. Using the universal ITS1/ITS4 primer set, the ITS region of the isolates were amplified and sequenced. The ITS sequences were very closely related to G. applantum isolate GBGA-01, GBGA-02, ASI 50167, ASI 52821, ASI 52822, ASI 52823 and ASI 53399, but were not the same species. Whereas, G. lucidum isolate ASI 7125 belongs to different group.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.7
• /
• pp.3562-3569
• /
• 2013

The performance of concrete structure decreases with change in time and the external environment. In order to reinforce the structure, the research about new material development and application of newly developed materials are widely conducted. In the case of composite FRP, it received good attention in the academia due to its high intensity-weight ratio, excellent corrosion resistency as well as good workability. When applying at the construction field, however, the utilization of FRP did not increase as much due to lack of reliability and design standard. Current study investigated the material characteristics during the temperature change at high temperature and the structural behavior from restraint effect for GFRP reinforcing materials. Two experimental variables were set in this study: GFRP reinforcements due to tensile properties of temperature and restraint compression effects. Three concrete specimen were selected for each set temperatures. For this reason, as a variable to experiment with the effects confined compression concrete members value and tensile properties with temperature reinforcement GFRP, experiment produced three pieces each for each set temperature, the concrete specimen, which is confined in the GFRP was selected each I did. For the temperature change during the experiment, the concrete specimen were mounted in order to expose to experimental high temperature for certain period of time. For compression performance evaluation, reinforcement effect from horizontal constraint of the fiber were measured using an Universal Material Testing Machine (UTM). Finally, this study revealed that the binding characteristics of GFRP materials from temperature change decreased. Also, this study showed that the maximum compression intensity decreased as the temperature increased up to $150^{\circ}C$ in the constraints ability of the GFRP reinforcements during the horizontal constraint of concrete.

• Journal of the Korean Society of Radiology
• /
• v.15 no.1
• /
• pp.21-28
• /
• 2021

Computed tomography (CT) has the problem of having more radiation exposure compared to other radiographic apparatus. There is a low-dose imaging technique for reducing exposure, but it has a disadvantage of increasing noise in the image. To compensate for this, various noise reduction algorithms have been developed that improve image quality while reducing the exposure dose of patients, of which the median modified Wiener filter (MMWF) algorithm that can be effectively applied to CT devices with excellent time resolution has been presented. The purpose of this study is to optimize the mask size of MMWF algorithm and to see the excellence of noise reduction of MMWF algorithm for existing algorithms. After applying the MMWF algorithm with each mask sizes set from the MASH phantom abdominal images acquired using the MATLAB program, which includes Gaussian noise added, and compared the values of root mean square error (RMSE), peak signal-to-noise ratio (PSNR), coefficient correlation (CC), and universal image quality index (UQI). The results showed that RMSE value was the lowest and PSNR, CC and UQI values were the highest in the 5 x 5 mask size. In addition, comparing Gaussian filter, median filter, Wiener filter, and MMWF with RMSE, PSNR, CC, and UQI by applying the optimized mask size. As a result, the most improved RMSE, PSNR, CC, and UQI values were showed in MMWF algorithms.

• Restorative Dentistry and Endodontics
• /
• v.32 no.2
• /
• pp.111-120
• /
• 2007

The purpose of this study is to evaluate the effects of surface treatment and composition of reinforcement material on fracture strength of fiber reinforced composite inlay bridges. The materials used for this study were I-beam, U-beam TESCERA ATL system and ONE STEP(Bisco, IL, USA). Two kinds of surface treatments were used; the silane and the sandblast. The specimens were divided into 11 groups through the composition of reinforcing materials and the surface treatments. On the dentiform, supposing the missing of Maxillary second pre-molar and indirect composite inlay bridge cavities on adjacent first pre-molar disto-occlusal cavity, first molar mesio-occlusal cavity was prepared with conventional high-speed inlay bur. The reinforcing materials were placed on the proximal box space and build up the composite inlay bridge consequently. After the curing, specimen was set on the testing die with ZPC. Flexural force was applied with universal testing machine (EZ-tester; Shimadzu, Japan). at a cross-head speed of 1 mm/min until initial crack occurred. The data was analyzed using one-way ANOVA/Scheffes post-hoc test at 95% significance level. Groups using I-beam showed the highest fracture strengths (p<0.05) and there were no significant differences between each surface treatment (p>0.05) Most of the specimens in groups that used reinforcing material showed delamination. 1. The use of I-beam represented highest fracture strengths (p<0.05) 2. In groups only using silane as a surface treatment showed highest fracture strength, but there were no significant differences between other surface treatments (p>0.05). 3. The reinforcing materials affect the fracture strength and pattern of composites inlay bridge. 4 The holes at the U-beam did not increase the fracture strength of composites inlay bridge.