• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.12B
• /
• pp.1236-1243
• /
• 2010

The perimeter defense system was created and its characteristics were evaluated. It was designed to utilize the fiber sensing device, namely OTDR(Optical Time Domain Reflectometer) which has been used for the maintenance of the optical communication network. An OTDR was constituted by a pulse laser with the nature of 1310nm, +15dBm for the observation of 400 meter optical fence. The high-speed 32-bit processor(S3C2440) has applied to MPU(Main Processor Unit) which helps to improve the performance of OTDR algorithms. Consequently, the maximum error was 0.84 meter on the performance test of the 10km monitoring and the pass criteria of ${\pm}1m$ satisfied in all the sections. The alarm delay time was under 3 sec after detecting the disorder. For the case of secondary trespassing after primary trespassing, the optical switch was installed in OTDR to monitor the secondary trespassing and to measure the multi-point detection. Therefore, this paper shows that the detections of secondary trespassing and multi-point is possible by means of optical switch.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.3 no.1
• /
• pp.78-82
• /
• 2014

Power Transformers with more than one secondary winding are not uncommon in industrial applications. But new classes of applications where very large number of independent secondaries are used are becoming popular in controlled converters for medium and high voltage applications. Cascade H-bridge medium voltage drives and Pulse Step Modulation (PSM) based high voltage power supplies are such applications. Regulated high voltage power supplies (Fig. 1) with 35-100 kV, 5-10 MW output range with very fast dynamics (${\mu}S$ order) uses such transformers. Such power supplies are widely used in fusion research. Here series connection of isolated voltage sources with conventional switching semiconductor devices is achieved by large number of separate transformers or by single unit of multi-secondary transformer. Naturally, a transformer having numbers of secondary windings (~40) on single core is the preferred solution due to space and cost considerations. For design and simulation analysis of such a power supply, the model of a multi-secondary transformer poses special problem to any circuit analysis software as many simulation softwares provide transformer models with limited number (3-6) of secondary windings. Multi-Secondary transformer models with 3 different schemes are available. A comparison of test results from a practical Multi-secondary transformer with a simulation model using magnetic component is found to describe the behavior closer to observed test results. Earlier models assumed magnetising inductance in a linear loss less core model although in actual it is saturable core made-up of CRGO steel laminations. This article discusses a more detailed representation of flux coupled magnetic model with saturable core properties to simulate actual transformers very close to its observed parameters in test and actual usage.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.11
• /
• pp.1239-1247
• /
• 2012

In this paper, design and fabrication of solid state power amplifier(SSPA) using GaN HEMT chip for X-band frequency are presented. The SSPA consists of the power supply for stable power and the control unit for communication and controlling the internal module, the RF Part to amplify RF signal, In particular the adopted active device for the RF Parts is GaN HEMT Bare chip of TriQuint company, the RF parts consists of pre-stage, drive-stage, main power-stage and each amplifier is designed with input and out matching circuit. The developed power amplifier demonstrated more than 300 W peak output power in condition of 26 % duty, max. pulse width 100us for the X-band frequency( 500 MHz bandwidth) and can apply to marine radar systems.

• Journal of the Semiconductor & Display Technology
• /
• v.12 no.2
• /
• pp.13-17
• /
• 2013

In lighting system where several large-area organic light-emitting diode (OLED) lighting panels are involved, panel aging may appear differently from each other, resulting in a falling-off in lighting quality. To achieve uniform light output across large-area OLED lighting panels, we have employed an optical feedback circuit. Light output from each OLED panel is monitored by the optical feedback circuit that consists of a photodiode, I-V converter, 10-bit analogdigital converter (ADC), and comparator. A photodiode generates current by detecting OLED light from one side of the glass substrate (i.e., edge emission). Namely, the target luminance from the emission area (bottom emission) of OLED panels is monitored by current generated from the photodiode mounted on a glass edge. To this end, we need to establish a mapping table between the ADC value and the luminance of bottom emission. The reference ADC value corresponds to the target luminance of OLED panels. If the ADC value is lower or higher than the reference one (i.e., when the luminance of OLED panel is lower or higher than its target luminance), a micro controller unit (MCU) adjusts the pulse width modulation (PWM) used for the control of the power supplied to OLED panels in such a way that the ADC value obtained from optical feedback is the same as the reference one. As such, the target luminance of each individual OLED panel is unchanged. With the optical feedback circuit included in the lighting system, we have observed only 2% difference in relative intensity of neighboring OLED panels.

• Journal of IKEEE
• /
• v.20 no.3
• /
• pp.299-302
• /
• 2016

In this paper, we designed the stack monitoring system with improved performance. To block the incoming pulse noise to the amplifier, shield and the power supply impedance are reduced and the power circuit is isolated. The control unit is developed with variable high voltage, adaptive gain, offset and threshold in order to match the scintillation detector characteristic to the apparatus. 300-1500V variable high voltage power circuit is configured applicable to various scintillation detector. Stack monitoring system with improved performance guarantee the efficiency and the reliability by considering the characteristic of various scintillation detector. Developed stack monitoring system is evaluated with certified testing equipment and shows excellent performance with respect to the uncertainty of the sensor test results.

• Environmental Mutagens and Carcinogens
• /
• v.25 no.1
• /
• pp.25-31
• /
• 2005

The objective was to use MR imaging to provide a template of posterior fossa development during the late stages in the chick embryos. The MR findings were then correlated with histological data. Fourteen normal formalin-fixed embryonic specimens with a gestational age of 14 to 20 days were examined with 1.5 Tesla unit MRl using a conventional clinical magnet and pulse sequences. The MR findings were correlated with the whole-mount histological specimens. Resolution of the morphological features of posterior fossa development in embryos greater than 14 days gestational age was possible. Development of cerebellum, brain stem, 4th ventricle and bony posterior fossa was documented. In the 14-day-old embryos, a premordial cerebellum was visualized in the enlarged bony posterior fossa, and it covered the the roof of the primitive fourth ventricle. The bony posterior fossa grows at the same rate along the supratentorial skull. The supratentorial skull and the rostral part of the brain grows at the same rate. The cerebellum begins to grow later than the rostral part of the brain. In the 19- to 20-day-old embryos, MRl revealed the rapid development of the cerebellar hemispheres, along with an increase in volume manifested by the more typical mushroom-shaped configuration observed in the newly hatched. At this stage, the cerebellum almost completely filled the posterior fossa and covered the entire fourth ventricle. The brain stem grew steadily, but the volume change was too subtle to evaluate. Features of cerebellar histogeneis were beyond the resolution of MRl. However, there were lots of artifacts in the features of the bony posterior fossa. An MR template of normal posterior fossa development would be useful to avoid confusion of normal development with abnormal development and to identify the expected developmental features when provided the estimated gestational age of a embryo.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.7
• /
• pp.1066-1071
• /
• 2017

Recently high voltage impulse (HVI) technique has been extensively studied for desalting processes to control the $CaCO_3$ scale formation in industrial water practices such as power plant, boiler, and heat exchange operations. Investigation of the operational parameters for the HVI is important, however, those had not been reported yet. In this study, the effect of initial feed volume and contact time on reduction of calcium ion concentration by the HVI technique was investigated. Initial feed volumes of artificial hard water which contained 100 mg/L of $Ca^{2+}$, were set to 1, 2, and 3 L respectively. After 24hr of HVI contact with 12kV, $Ca^{2+}$ ion was reduced to 50, 29 and 19 % of their initial concentration, indicating that calcium removal increased as initial feed volume decreased. This implies the applied HVI pulse energy per unit mass of calcium is important parameter determining overall desalting efficiency. A series of extended operations of HVI up to 30 days verified the long term stability of the HVI system. The calcium ion declined to 40 mg/L after 2~3 days, and further reduction of calcium was not achieved, indicating that optimum operation time could be 2~3 days under these experimental conditions. Consequently, it was confirmed that the important operational parameter of HVI technique is initial feed volume and contact time as well as the applied voltage that was already proven in the previous study.

• The Korean Journal of Physiology
• /
• v.2 no.2
• /
• pp.45-52
• /
• 1968

Maximal oxygen uptake was measured in twenty-eight middle-aged men aged 45.0 (range: 40.3-50.7) years and fourteen middle-aged women aged 40.5 (range: 34.3-47.5) years by means of a treadmill test. The physique of subjects were:mean skinfold thickness at 4 sites, namely, back, arm, waist and abdomen was 7.59 mm in men and 14.5 mm in women; total body fat estimated from the mean skinfold thickness, 11.9% fat in men and 25.5% fat in women. The detailed observations are as follows: 1. Maximal oxygen uptake expressed on any reference unit in men was greater than that of women. The values of men to women were: 2.61 to 1.92l/min., 45.1 to 37.0 ml/min./kg, 51.8 to 46.5 ml/min./kg lean body mass (LBM), 15.7 to 12.6 ml/min./cm body height. 2. Maximal pulmonary ventilation in men was 80.2 l/min. and 63.5 l/min. in women. 3. There was a correlation of fairly high degree between maximal oxygen uptake and body weight, namely, r=0.56 in men and r=0.79 in women. The correlation between maximal oxygen uptake and lean body mass also was fairly high, namely, r=0.58 in men and r=0.69 in women. 4. The correlation between maximal pulmonary ventilation and body weight or lean body mass was r=0.51 and r=0.25 in middle-aged men and r=0.41 and r=0.19 in middle-aged women, respectively. 5. Maximal heart rate in men was 176.4 beat/min. and it was 183.9 beat/min. in women. 6. Maximal oxygen pulse in men was 14.6 ml/beat and 9.5 ml/beat in women. 7. Aerobic work capacity of korean middle-aged men and women maintained the same level as that of young men and women, respectively, as shown by maximal oxygen uptake expressed ml/min./kg or ml/min./kg lean body mass.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.2
• /
• pp.1189-1199
• /
• 2015

This study examined the effects of favorite music therapy on the anxiety and vital signs at each point in gynecologic surgery using the general anesthesia. The research design was a non-equivalent control group non-synchronized design. The data were collected from May 1 to July 30, 2013 and the participants were 44 patients (experimental group, 21, control group, 23) received music therapy while waiting for anesthetic induction and PACU (Post Anesthesia Care Unit). Repeated measures ANOVA was performed to analyze the data by SPSS 18.0. Music therapy reduced the anxiety level at inducing the anesthetic time, and awakening time (p=.003; p=.011). The systolic blood pressure maintained stability at discharge from the PACU (p=.023), and pulse rate was stable at the awakening time (p=.016). This findings support the use of music as a nursing intervention to reduce anxiety and maintain the vital signs for gynecologic surgery patients under general anesthesia.

• Journal of Power Electronics
• /
• v.17 no.3
• /
• pp.821-834
• /
• 2017

This paper reports on a single-inductor multiple-output step-up converter with digital control. A systematic analog-to-digital-controller design is explained. The number of digital blocks in the feedback path of the proposed converter has been decreased. The simpler digital pulse-width modulation (DPWM) architecture is then utilized to reduce the power consumption. This architecture has several advantages because counters and a complex digital design are not required. An initially designed unit-delay cell is adopted recursively for the construction of coarse, intermediate, and fine delay blocks. A digital limiter is then designed to allow only useful code for the DPWM. The input voltage is 1.8 V, whereas output voltages are 2 V and 2.2 V. A co-simulation was also conducted utilizing PowerSim and Matlab/Simulink, whereby the 55 nm process was employed in the experimental results to evaluate the performance of the architecture.