• Journal of Electrical Engineering and Technology
• /
• v.9 no.2
• /
• pp.489-500
• /
• 2014

This paper presents a simple modified unipolar carrier-based pulsewidth modulation (CB-PWM) strategy for the three-level neutral-point-clamped (NPC) voltage source inverter (VSI). Analytical expressions for the relationship between modulation reference signals and output voltages are derived. The proposed modulation technique for the three-level NPC VSI includes the maximum and minimum of the three-phase sinusoidal reference voltages with zero-sequence voltage injection concept. The proposed modified CB-PWM strategy incorporates a novel method that requires only of one triangular carrier wave for generate the gating pulses in three-level NPC VSI. It has the advantages of being simplifying the algorithm with no need of complex two/multi-carrier pulsewidth modulation or space vector modulation (SVM) and it's also simple to implement. The possibility of the proposed CB-PWM technique has been verified though computer simulation and experimental results.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2007.11a
• /
• pp.63.2-63.2
• /
• 2007

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 1999.04a
• /
• pp.155-156
• /
• 1999

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.6
• /
• pp.275-280
• /
• 2010

Recently, This paper suggests that LED-ID technique applying positioning method for LED light. also, Authors in this paper has launched this investigation earnestly. However, there are various interferences such as MPI(Multi Path Interference) by reflected waves of the surface and interfere factors by their correlation properties of the ID in LED-ID wireless channel. Therefore, in this paper, we propose a novel OOK(On-Off Keying)-CDMA(Code Division Multiple Access) system using unipolar ZCD(Zero Correlation Duration) spreading code and verify the availability of the proposed system via the evaluation performance simulation.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.5
• /
• pp.1175-1181
• /
• 2013

The aim of this paper is to design and evaluate a high concentration, high penetration unipolar corona ionizer. The electrostatic characteristics in terms of voltage-current relationships of the present ionizer in the discharge zones for positive and negative coronas were discussed. Using ion current measurement, the concentration and penetration of ions were evaluated at corona voltages across the needle electrodes between 1 and 4 kV, flow rates between 1 and 5 L/min, and an operating pressure of 1 atm. In the discharge zone of the ionizer, the highest ion concentrations were found to be about $1.71{\times}10^{14}$ and $5.09{\times}10^{14}\;ions/m^3$ for positive and negative coronas, respectively. At the outlet of the ionizer, it was found that the highest ion concentration was about $1.95{\times}10^{13}$ and $1.91{\times}10^{13}\;ions/m^3$ for positive and negative coronas, respectively. The highest ion penetration for positive and negative coronas through the ionizer was found to be about 98 % and 33 %, respectively. The $N_it$ product for positive and negative coronas was also found to $1.28{\times}10^{13}$ and $7.43{\times}10^{13}\;ions/m^3s$, respectively. From the findings, this ionizer proved to be particularly useful as an aerosol charger for positive and negative charge before the detector in an electrical aerosol detector.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.3
• /
• pp.283-289
• /
• 2018

A PLL with an unipolar charge pump and a loop filter consisting of sample-hold capacitor and Fvco-sampled feedforward loop filter. The proposed PLL not only reduces the chip area by replacing the resistance to a switch and a small capacitor but also reduces the variation of ${\Delta}VLPF$ and ${\Delta}{\Delta}VLPF$ to 1/6 and 1/5 respectively. The variation of ${\Delta}VLPF$ is related to the phase noise of VCO output and that of ${\Delta}{\Delta}VLPF$ is proportional to reference spurs. It has been simulated and verified with a 1.8V $0.18{\mu}m$ CMOS process and shown a good phase noise characteristics. We plan to fabricate chip based on the simulations and check performance.

• Journal of the Microelectronics and Packaging Society
• /
• v.21 no.4
• /
• pp.111-115
• /
• 2014

Effect of dynamic electric fields on dielectric breakdown behavior in Cu damascene interconnects was investigated. Among the DC, unipolar, and bipolar pulse conditions, the longest dielectric lifetime is observed under the bipolar condition because backward Cu ion drift occurs when the direction of electric field is changed by 180 degrees and Cu contamination is prohibited as a results. Under the unipolar pulse condition, the dielectric lifetime increases as pulse frequency increases and it exceed the lifetime under DC condition. It suggests that the intrinsic breakdown of dielectrics significantly affect the dielectric breakdown in addition to Cu contamination. As the unipolar pulse width decreases, dielectric bond breakdown is more difficult to occur.

• Archives of Plastic Surgery
• /
• v.36 no.1
• /
• pp.38-45
• /
• 2009

Purpose: The congenital muscular torticollis is a neck deformity involving shortening of the sternocleidomastoid muscle, which is detected at birth or shortly after birth. This childhood disease is the third most common congenital musculoskeletal anomaly. The indication for surgery is a persistent head tilt with dificit of passive rotation and lateral bending of the neck and a tight band or tumor in the sternocleidomastoid muscle even after physical therapy. The purpose of this article is to report surgical outcomes with patients who had no or little response to physical therapy. Methods: Surgery was performed on 29 patients and their average age was 4.1 years (from 6 months to 20.1 years). The unipolar open release and partial myectomy were done in 28 cases and the muscle lengthening was done in 1 case. Physical therapy was started from postoperative seventh day. Follow - up period was ranged from 2 months to 5.4 years(mean follow - up, 20.4 months). Result: There were neither rotation nor lateral bending deficit after surgical treatment. Mild head tilt was noticed in 3 cases and residual bend was observed in 4 cases. The subjective assessments of surgical results by parents were excellent. Conclusion: Our surgical outcome encourages the surgical treatment of congenital muscular torticollis for patients who failed to respond to physical therapy.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.171-171
• /
• 2010

In this work, we investigated the effect of the oxidation temperature on the unipolar and bipolar resistance switching behaviors of the oxidized TiO-x films. TiOx films on Pt electrodes were fabricated by the oxidation of Ti films at $550^{\circ}C$ for 1 to 3 hours. The unipolar and bipolar resistance switching properties were investigated with the oxidation temperature and time. Also, the crystal structure and the physical properties such as chemical bonding states of TiOx layers were characterized in addition to the resistance switching characteristics. The resistance switching behaviors of TiOx films oxidized at above $450^{\circ}C$ and below $650^{\circ}C$ was shown. So, we investigated that the resistance switching behaviors of TiOx films oxidized at $550^{\circ}C$ with the oxidation time from 1 to 3 hour. The memory windows of unipolar switching in the oxidized TiOx films were reduced with increasing the oxidation time, but those of the bipolar switching were slightly enlarged. The enlargement of rutile TiO2 peak with increasing the oxidation time and temperature was studied by X-ray diffraction. An increase of non-lattice oxygen and Ti3+ in the TiOx films with the oxidation times was investigated by X-ray photoemission spectroscopy. It was expected that the uipolar and bipolar resistive switching of the oxidized TiOx film was strongly related with the migration of non-lattice oxygen anions and schottky barrier height, respectively.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.6 no.5
• /
• pp.416-422
• /
• 2001

The BLDC(Brushless DC) Motor is characterized by linear torque to current and speed to voltage. It has low acoustic noise and fast dynamic response. Moreover, it has high power density with high proportion of torque to inertia in spite of small size drive. However, when armature current is commutated, the current ripple is generated by the motor inductance components in stator windings and back-EMF. This current ripple caused to torque ripple. Therefore, it is difficult to apply the BLDC motor to a precision servo drive system. In this paper, a new current control algorithm using fourier series coefficients is proposed. This proposed algorithm can minimize torque ripple due to the phase current commutation of BLDC motor. Simulation and Experimental results prove the effectiveness at the Proposed algorithm through comparison with the conventional unipolar PWM method.