• 대한수학회지
• /
• 제37권2호
• /
• pp.139-175
• /
• 2000

We consider the boundary behavior of a Hardy class holomorphic function, either on the disk D in the complex plane or on a domain in multi-dimensional complex space. Although the two theories are formally different, we postulate some unifying fearures, and we suggest some future directions for research.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
• /
• pp.147-148
• /
• 2009

본 논문에서는 콘크리트 휨부재에 효율적인 프리스트레스를 도입할 수 있는 강봉과 강연선이 일체화된 정착구의 양쪽 연결구의 이동량과 도입긴장력의 관계를 규명하고 설계에 적용할 수 있는 계산식을 유도하였다.

• 한국지반공학회논문집
• /
• 제34권12호
• /
• pp.93-103
• /
• 2018

볼트 수직이음 PHC말뚝 및 용접이음 PHC말뚝에 대한 휨강도시험을 실시하여 각 이음 PHC말뚝의 성능을 비교 분석하였다. $200N{\cdot}m$이상의 토크치로 체결한 볼트 수직이음 PHC말뚝에서는 가장 낮은 하중단계인 20kN에서도 볼트 수직이음구에서 좌우로 꺾인 변형 양상(직선 v형 라인)이 나타났으며 PHC말뚝 본체는 완전한 직선 형태를 유지하고 있었으므로 볼트 수직이음 PHC말뚝은 말뚝의 가장 중요한 성능인 일체화 거동을 하지 않았다. 체결토크가 풀린 즉, $20N{\cdot}m$의 토크치로 체결한 볼트 수직이음 PHC말뚝은 각 하중 단계에서 이음부위에 대하여 양쪽으로 대칭된 직선 V형 상태의 변위 양상을 나타내고 있었다. 각 하중 단계에서 하중 제거 시 이음말뚝은 하중 재하 전의 상태로 돌아가지 않았으므로 탄성 재료 거동을 나타내지도 않았다. 재하단계에 따른 이음부 변위 및 재하 하중 제거 후의 잔류 변위, 이음 PHC말뚝의 파괴하중 및 3가지 기본 성능 등을 비교한 결과 볼트 수직이음 PHC말뚝의 이음 품질은 용접이음 PHC말뚝의 이음 품질에 크게 미달하였다. 따라서 $200N{\cdot}m$ 이상의 토크치로 체결한 볼트 수직이음 PHC말뚝이나 체결토크가 풀린 볼트 수직이음 PHC말뚝은 이음말뚝의 기본 성능에 크게 미달하는 것으로 나타났다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제5권2호
• /
• pp.163-174
• /
• 2001

This paper is to study the characteristics of axial force behavior that operates to the part of turnout when it makes the turnout and the continuous welded rail unifying. The study is to model by using the 50kgN rail No. 15 turnout used in the domestic national railway and the UIC60 rail No. 18 turnout used in the rapid transit railway as the finite elements for analyzing the axial force behavior of the turnout by the continuous welded rail. It is to analyze the characteristics of behavior according to the change of creep resistance, ballast resistance and the change of parameter valuables of heel joint by the axial force simulation in making the continuous welded rail and then, it is to present the result. As the result of research on the parameter valuables through the analysis, it shows that the maximum axial force of turnout by the continuous welded rail are largely subordinated to the maximum resistance of heel joint and the fitting devices than the ballast resistance. Also it shows that the maximum axial force produced changes a lot according to the characteristics of creep resistance of the fitting part and the ballast resistance.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 추계학술대회 논문집
• /
• pp.301-304
• /
• 2001

Hot-compression tests were carried out to investigate the hot workability of Ti64 and Ti6246 alloys at different temperatures and strain rates. Processing maps were developed on the basis of the dynamic material model unifying the relationship among constitutive behavior, hot workability and microstructure development. Stable regions, defined on the basis of four stability criteria 0${\delta}log(m)/\frac{\bot}{\varepsilon})<0$, s<1 and ${\delta}log(s)/\frac{\bot}{\varepsilon})<0$, were found to be associated with dynamic recovery and recrystallization.

• 대한산업공학회지
• /
• 제16권1호
• /
• pp.37-50
• /
• 1990

It has been recognized several years ago that traffic engineering in the multiservice environment of future ISDN will bring an incredible amount of work to be done. It is also true that ISDN traffic studies have been performed in case by case with traffic engineers' own discipline and with a poor knowledge on traffic characteristics and user behavior. In this study three major mainstreams of the currently active research topics are identified, which need to be standardized and analyzed under some unifying concepts. Based on the results of CCITT discussions, an attempt is made to answer the each question. The standardized analysis method will be most important for the design, engineering and operation of the ISDN in future.

• 모자간호학회지
• /
• 제4권1호
• /
• pp.80-90
• /
• 1994

Concept analysis is a strategy that examines the attributes or characteristics of a concept. It is a formal linguistic exercise to determine those defining attributes. The basic purpose of concept analysis is to clarify ambiguous concepts in theory, and to propose a precise operational definition which reflects the theoretical base of the concept. The concept of maternal role is too broad and variable in expression, therefore there has been no authentic definition nor standard opinion for this concept. The purpose of this study is to clarify the concept of maternal role which in turn will help in the development of a theory of maternal role attainment. In order to analyze the concept of maternal role, much effort was extended to look up "maternal role" in various dictionaries and literature, but only a few cases were found which listed this terminology. Consultation on the meaning of "mother" and "role" separately was then done and consequently a definition of "maternal role" was obtained through concept analysis of these two words independently, finding their attributes and unifying them. The attributes of the concept of maternal role which was analyzed based on the steps of concept analysis by Walker & Avant (1988) are : 1) Women who have pregnancies 2) Women who have a child 3) Women who rear a child 4) Expected behavior according to social status 5) Learning through social cultures 6) Social interrelationships. The antecedents of the maternal role are : 1) women who are pregnant and deliver a baby, must keep in contact with their child. 2) Circumstances for childrearing must be provided. 3) Formation of self-concept as mother should be developed, cognitive activity, which is necessary for the nurturing activity, financial support and preparation of childrearing should be provided. And the consequences of the maternal role are : 1) Improvement 2) Changeability 3) Ambiguity 4) Stability Through this concept analysis, the concept of the maternal role is defined as "expected behavior by social interrelationships and learned nurturing behavior through social cultures."

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.220-225
• /
• 2004

The mesh-insensitive structural stress procedure by Dong is modified to apply to the welded joints with local thickness variation and inignorable shear/normal stresses along local discontinuity surface. In order to make use of the structural stress based K solution for fatigue correlation of welded joints, a proper crack growth model needs to be developed. There exist some significant discrepancies in inferring the slope or crack growth exponent in the conventional Paris law regime. Two-stage crack growth model was not considered since its applications are focused upon the fatigue behavior in welded joints in which the load ratio effects are considered negligible. In this paper, a two-stage crack growth law considering high mean loading is proposed and proven to be effective in unifying the so-called anomalous short crack growth data.

• 한국군사과학기술학회지
• /
• 제12권3호
• /
• pp.333-343
• /
• 2009

Tactical Information Communication Network(TICN) is a concept-type integrated Military Communication system that enables precise command control and decision making by unifying the diversified military communication network and conveying diverse range of battle field information on real-time, at right place at right time. TICN is designed to advance into high speed, large capacity, long distance wireless relay transmission. To support mobility in battlefield environments, the application of Ad-hoc networking technology to its wireless communication has been examined. Ad-hoc network is consist of mobile nodes and nodes in the network depends on the cooperation of other nodes for forwarding of packets. In this context, some non-cooperating nodes may delay forwarding of packets or drop the packets. This may hamper the network as a whole and disrupt communication between the cooperating nodes. To solve this problem, we present a solution with a Node Weight Management Server(NWMS), which manages each node's weight according to its behavior in local area. When the NWMS detects misbehaving node, it increases the node's weight. If the node's weight exceeds a predefined threshold then the NWMS broadcasts the node's information into network to isolate the misbehaving node from the network. These mechanisms show that they are highly effective and can reliably detect a multitude of misbehaving node.

• 한국해양공학회지
• /
• 제10권1호
• /
• pp.53-64
• /
• 1996

In this paper, rotating bending fatigue tests have been carried out to investigate the growth behabiors of surface fatigue crack initiated from a small artificial surface defect, that might exist in real structures, on 2024-T3 and 6:4 brass. The test results are analysed in the viewpoints of both strength of materials and fracture mechanics, it can be concluded as follows. The effect of a small artificial surface defect upon the fatigue strength is very large. The sensitivity of 2024-T3 on the defect is higher than that of 6:4 brass. The growth behavior of the surface fatigue crack of 2024-T3 is different from that of 6:4 brass. The growth rate of the surface fatigue crack of 2024-T3 is considerably rapid in the early stage of the fatigue life and apt to decrease in the later stage. It was impossible to establish a unifying approach in the analysis of crack growth begabior of 2024-T3 and 6:4 brass using the maximum stress intensity factor because of their dependence on stress level. But if the elastic strain and cyclic total strain intensity factor range were applied to obtain the growth rate of surface fatigue cracks of the materials, the data were found to be nearly coincided.