• Journal of Distribution Science
• /
• v.13 no.10
• /
• pp.123-133
• /
• 2015

Purpose - The Korean government has devised intermodal transportation policies and granted subsidies to shippers and logistics companies that made a conversion of transportation means through the policies. This provides support by expanding the complex uniform railroad transportation and overhauling the deteriorated railroad facilities. As for 2013, however, the freight transportation percentage of railroad was 4.5% in tons and 8.5% in ton kilometers. Meanwhile, since the 1990s, developed countries such as the U.S. and Europe have been trying to expand intermodal freight transport with a legal and institutional support to build a logistics system corresponding with social and economic environmental changes. In this study, I set out to examine the effects of the intermodal freight transport policies in the EU and the U.S., and to explore the direction of setting up a rail intermodal transport system in South Korea. Research design, data, and methodology - The paper used a qualitative research methodology through the literature review. First, was an overview of Intermodal transportation in the EU, U.S. and UN. Second, it describes the development of transport in Europe and the U.S. with particular emphasis on intermodal freight transport. Third, it explores the direction of setting up a intermodal freight transport in South Korea. The last section contains concluding remarks. Results - As for the EU, it has been promoting integration between transport and intermodal logistics network designs while utilizing ITS or ICT and supports for rail freight intermodal by giving reduction to a facilities fee or subsidizing for rail freight in order to minimize the cost of external due to freight transport. On the other hand, as for the U.S., it has been made up of an industrial-led operating project and has been promoting it to improve accessibility between intermodal hubs and cargo terminals through intermodal corridor program, and an intermodal cargo hub access corridor projects, etc. Moreover, it has tried to construct intermodal transport system using ITS or ICT and to remove Barrier. As a result, in these countries, the proportion of intermodal freight transport is going to be the second significant transport compared with rail and maritime transport. An Effective rail intermodal transport system is needed in South Korea, as seen in the case of these countries. In order to achieve this object, the following points are required to establish radical infrastructure policy; diversify investment financing measures taken under public-private partnerships, legal responsibilities, improvement of utilization of existing facilities to connect the railway terminal and truck terminal, and enhancement service competitiveness through providing cargo tracking and security information that combines the ITS and ICT. Conclusions - This study will be used as a basis for policy and support for intermodal freight transport in South Korea. In the future, it is also necessary to examine from the perspective of the shipper companies using the rail intermodal transport, ie, recognition of shipper, needed institutional supports, and transportation demand forecasting and cost-effective analysis of the railway infrastructure systems improvement.

• Journal of Distribution Science
• /
• v.13 no.10
• /
• pp.93-99
• /
• 2015

Purpose - It has been argued that the regulations restricting entry and opening hours of General Super Markets and Super Super Markets have not been as effective as expected. In contrast, the win-win item scheme that appeared recently has the advantage that it could raise the effectiveness of the system in that win-win items are in principle resigned on the basis of bilateral agreements. This study analyzes the win-win item agreement made between Homeplus at Hap-jung and small traditional markets to examine the practical effectiveness of the win-win item scheme. While existing literature studying the regulatory effects have concentrated on the restrictions around store entry or opening hours of large retailers, it can be said that there have been few empirical studies on the effect of win-win items agreement with large retailers. Research design, data, and methodology - Homeplus at Hap-jung made a win-win items agreement with nearby small traditional market traders in 2013. In accordance with this voluntary agreement, Homeplus started by limiting its sales to 15 win-win items. The survey was conducted through one-on-one interviews, April 14 to May 2, 2014, by a professional public opinion research agency. The interviews were targeted at small business retailers in the nearby traditional market. We divided the traditional markets near Homeplus at Hap-jung where the win-win item agreement was achieved into two groups, win-win item agreement markets and non win-win item agreement markets, to compare the performance difference between the two groups. Results - To determine the change in sales of the 15 win-win items, we examined the performance difference between the two groups using two criteria (compared with similar items, and compared to sales volume a year ago). The results show that the individual sales of win-win items in the win-win item agreement markets are more likely to increase than in the non win-win item agreement markets. Total sales volume of individual stores in the agreement markets also showed a more significant increase compared to a year ago than those in non win-win item agreement markets. Conclusions - Contrary to the existing retail regulations that have one-sided and uniform characteristics, it can be pointed out that the win-win item scheme has the effect of increasing the success of the system itself because it is done on the basis of mutual agreement between General Super Markets and traditional markets. The empirical results of this study can be said to support this conjecture. For the successful settlement of a win-win items agreement, the following points should be reviewed. First, it requires a great effort from the selection process of win-win items in order to improve the effectiveness of the agreement. Second, the existing General Super Markets customers should be introduced to the traditional markets or small shops to increase the sales of win-win items. Therefore, voluntary effort is essentially required from the traditional markets to engage customers.

• Journal of Korean Society of Steel Construction
• /
• v.9 no.4 s.33
• /
• pp.659-672
• /
• 1997

Thermal response induced from nonlinear temperature distribution in composite box gilder bridges depends on several variables(environmental conditions, physical and material properties, location and orientation of bridge, and cross-section geometry). In this paper, parametric study are conducted in order to find the effects of variations of seasons, location and orientation of bridge, sectional geometry and some material properties on the axial deformation, curvature and stresses in composite box girder bridge. A two-dimensional transient finite element model to conduct this parametric studies is briefly presented. Firstly, the effects of the parameters on the diurnal variation of curvature are considered, and for the time of maximum curvature, on the distribution of temperature and stresses of composite box girder sectional are considered. Finally, some considerations about the influence of the parameters on the daily maximum values of axial deformation, curvature and stresses are carried out. The influence of thermal effect on structures is important as much as the influence of live or dead load in some cases. In the design of steel composite bridges, the thermal stresses calculated on the supposition that the temperature difference between the concrete slab and steel girder is $10^{\circ}C$ and the temperature distributions are uniform in concrete slab and steel girder can be underestimated.

• Journal of Korea Spatial Information System Society
• /
• v.7 no.3 s.15
• /
• pp.107-118
• /
• 2005

Various spatial data are utilized, through geographic information system, for the process to make a decision related to space. Generally, spatial data is large in quantity and it costs high and takes quite a long time for producing and maintaining it. An existing spatial data management system, tile-based one, for digital map manages spatial data being separated by a uniform data unit called tile. These systems can be implemented easily but have many problems such as they can directly store and manage feature included in tile. Therefore, in this paper, we suggest a feature-based spatial data management system for digital map. The proposed system is able to store and manage spatial data in the unit of feature directly. Hence this system is able to immediately update any change in the data and to supply users with the updated data without any delay. The proposed system can not only support a function of data input, management, supplying and update but also support unity origin coordinate conversion, UFID creation, feature unifying, feature dividing and metadata input which is not supported by the existing tile-based system. The proposed system can easily manage spatial data and can increase efficiency in processing and application.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.36 no.4
• /
• pp.329-336
• /
• 2000

Welding is a important technological method in mechanical engineering. $CO_2$MAG(metal active gas) welding means that metal part in double capstan drum for the inshore and costal vessels are joined by melting(with or without a filler material) or that new material is added to a metal part by melting. The thermal stresses appear due to a non-uniform temperature field, inhomogeneous material properties, external restraint and volume changes during phase transformations. In this study analysis the elasto-plastic thermal stresses distribution of welding part in double capstan drum for the inshore and costal vessels using finite element method (FBM). Therefore it calculates the numerical value that can be applied to the optimum design of welding parts and the shapes. The significant results obtained in this study are summarized as fellows. At early stage of the cooling after welding process, the abrupt thermal stresses gradient has been shown in the vicinity of welding part. In the thermal stresses analysis due to temperature gradient and heat shocking maximum stress was occurred of welding part and stresses were distributed from 54MPa~48MPa.

• International Journal of Highway Engineering
• /
• v.8 no.4 s.30
• /
• pp.135-143
• /
• 2006

This study evaluated the fatigue resistance characteristics of hot-mix recycled asphalt mixtures which were prepared by a new blending method. Since the binder of RAP shows higher viscosity without being rejuvenated in the ordinary recycled mixture, this new(modified) blending method was developed for obtaining more uniform level of binder viscosity in the recycled mixture. Cold-planned RAP was collected and mix design was performed using 15% RAP content for two virgin aggregate, gneiss and granite. Penetration grade of 60-80 asphalt was used in mixing recycled mixture together with a polymer modifier, LDPE. Indirect tensile fatigue tests were carried out to evaluate characteristics of fatigue resistance of performance of recycled asphalt mixtures. The recycled mixtures with LDPE 6% showed higher repeated loading fatigue life. Fatigue life ratio of new(N) mixing method mixtures was approximately 0.6-0.7 before aging and 0.8-1.0 after aging treatment of ordinary(O) mixing method mixture. This means the N mixture becomes stronger with aging process increase. If further aging is treated, N mixture may be showing stronger resistance than O mixture.

• Journal of Fashion Business
• /
• v.5 no.4
• /
• pp.158-175
• /
• 2001

The purpose of this study was to understand and improve the clothing habits and the apparel industry of North Korea in preparation for the reunification of South and North Korea. For this study, literary data, reports, periodicals, interviews and internet data of the two Koreas were reviewed. North Korean clothing habits used to be monotonous and uniform but nowadays people's clothes have become somewhat brighter in color and more diverse in design than before. In particular, liberal and individual dressing habits appeared among the privileged classes. When taking part in national events, women have to wear the traditional Korean costume, Hanbok, while men wear business suits for formal wear. In general, men don't wear Hanbok. Students have to be in uniforms but blue jeans, T-shirts with English logos were popular among them reflecting their sensitivity and openness towards western cultures. The brides usually wear pink Hanboks and the bridegrooms wear black business suits for their wedding. North Koreans also wear Hanbok on national holidays like South Koreans. Clothing is the most important item in the trade of process commission between North and South Korea. Trading items are mid to low end men's clothing for the most part due to less emphasis on fashion in the North. The processing is indirect trade and composed of sample making and contracting, sending out materials and production, carrying in goods and setting accounts. To activate South-North trade, establishment of infrastructure, stabilization of shipping, reducing high costs of distribution, building direct communication system by setting up office in a neutral zone and simplifying procedures in applying for the South and North Korea Economic Cooperation Fund. On the other hand, clothing and textiles education is carried on at art colleges, light industries colleges and commercial colleges in Pyongyang. Clothing institutes which study Hanbok and Western clothes, are installed in each city and province. Graduates who majored in clothing and textiles are posted in institutes or apparel factories. Their job is designing, patternmaking and sewing for their customers. Most of them are women and in good state of economic conditions. The North Korean clothing industry has been the core national industry that has developed based on overseas demand form the mid 1980s. The standard is that of South Korea in the early 1980s. In 1999, trade of North Korean textile products with trade counterparts such as Japan and China was $1.3 million in exports and $1.27 in imports. Of this amount the export takes up 25.4% of the total exports in North Korea. However, fundamentally even in sectors that are irrelevant to politics such as the fashion clothing industry, trust between the South and North should be a prerequisite. Only through this can exchange between North and South and economic cooperation contribute towards the reunification.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.4
• /
• pp.100-105
• /
• 2016

The use of 3D scanners has increased gradually according to increasing 3D printer applications. The precision inspection of car parts or electronic components is an important issue not only in the field of mass production, but also in small-scale production. Recently, 3D scanner equipment efficiency and recognition technology has been improved continuously. On the other hand, the spraying time to prepare 3D scanning is time-consuming and has environmental problems. Therefore, an automatic spray system has been in demand by the manufacturing industry. Automatic spray equipment was newly developed for the preparation of a 3D scanner. In this research, the automatic spray system guarantees uniform spray operation. To determine the optimal spray parameters, various spraying methods, solutions and conditions were tested and compared with the experiments. The preparation time for 3D scanning was reduced to 1/10 compared to the manual spraying time, and indicates the optimal spraying conditions through a comparison of various spray coating conditions.

• Herbal Formula Science
• /
• v.18 no.2
• /
• pp.227-239
• /
• 2010

Objective : The purpose of this study was to develop the simulator which can analyze the anti-inflammatory effects of herbs based on e-cell, or the virtual cell. Method : We have ensured the medical herbs and its active compounds by investigating the oriental medicine records and NBCI(Biomedicine database). Also we have developed the web-based search system for confirming database related to anti-inflammation. We have researched the cell signal pathway related with inflammatory response control and established the mathematical model of herb interaction on selected signal pathway in e-cell. Finally we have developed the prototype which can confirm the result of this model visibly. Results : We constructed the database of 62 cases of anti-inflammatory active compounds in 61 cases of medical herbs which have been known anti-inflammation effects in the paper, 16 cases of inflammatory factors, 10 cases of signal pathways related with inflammatory response and 6,834 cases of URL(Uniform Resource Locator) of referenced papers. And we embodied the web-based research system, which can research this database. User can search basic and detailed information of medical plants related with anti-inflammatory by using information system. And user can acquire information on an active compounds, a signal pathway and a link URL of related paper. Among investigated ten pathways, we selected NF-${\kappa}B$, which plays important role in activation of immune system, and we searched the mechanisms of actions of proteins which could be components of this pathway. We reduced total network into IKK-$I{\kappa}B$ - NF-${\kappa}B$, and completed mathematic modeling by using ordinary differential equations and response variables of $I{\kappa}B-NF-{\kappa}B$ signaling model network which is suggested by Baltimore Group. We designed OED(Ordinary Differential Equation) for response of IKK, $I{\kappa}B$, $NF-{\kappa}B$ in e-cell's cytoplasm and nucleus, and measured whether an active compound of medicinal plants which is inputted by an user would have a anti-inflammation effects in obedience to change in concentration over time. The proposed model was verified by using experimental results of the papers which are listed on NCBI.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.21 no.1
• /
• pp.27-34
• /
• 2015

Heating patterns depending on the packaging materials were examined in order to investigate the causes of thermal deformation of packages used for ready-to-eat foods for microwave heating due to the non-uniformity of microwaves. Physical properties including tensile strength, heat-resistance and elongation of four different CPP grades were compared. High retortable CPP had higher sealing strength and heat resistance compared to the conventional CPPs. All CPP samples tested were proved to have melting temperatures around $160^{\circ}C$. However, they were all thermally deformed by microwave heating due to a limited penetration of microwave and non-uniform heating within the spicy sauce of high viscosity contained high salt, especially on the above the filling line and sealing edge of pouches. When the laminated stand-up pouches composed of G-PET/PET/PET/CPP and G-PET/PET/NY/CPP were retorted and microwaved, significant deformations were noticed in both samples after retorting. Besides, pouches contained titanium dioxide showed more intense thermal deformation than the control. When the $10{\mu}m$ aluminium foil was affixed on the pouch, small thermal deformation was observed only in the bottom layer. More studies are required to prevent the thermal deformation of packaging materials used for RTE foods during microwave heating by developing the technologies to increase the thermal stability of CPP layer and the modification of packaging design to modify the microwave access into the package.