• Journal of Korean Society of Steel Construction
• /
• v.17 no.4 s.77
• /
• pp.385-394
• /
• 2005

In this paper, a discrete optimum design program was developed using the refined fuzzy-genetic algorithms based on the genetic algorithms and the fuzzy theory. The optimum design in this study can perform section and shape optimization simultaneously for planar and spatial steel structures. In this paper, the objective function is the weight of steel structures and the constraints are the design limits defined by the design and buckling strengths, displacements, and thicknesses of the member sections. The design variables are the dimensions and coordinates of the steel sections. Design examples are given to show the applicability of the discrete optimum design using the improved fuzzy-genetic algorithms in this study.

• Structural Engineering and Mechanics
• /
• v.69 no.6
• /
• pp.627-635
• /
• 2019

In order to study the axial compression performance of sand-lightweight concrete-filled steel tube (SLCFST) stub columns, three circular SLCFST (C-SLCFST) stub column specimens and three SLCFST square (S-SLCFST) stub column specimens were fabricated and static monotonic axial compression performance testing was carried out, using the volume ratio between river sand and ceramic sand in sand-lightweight concrete (SLC) as a varying parameter. The stress process and failure mode of the specimens were observed, stress-strain curves were obtained and analysed for the specimens, and the ultimate bearing capacity of SLCFST stub column specimens was calculated based on unified strength theory, limit equilibrium theory and superposition theory. The results show that the outer steel tubes of SLCFST stub columns buckled outward, core SLC was crushed, and the damage to the upper parts of the S-SLCFST stub columns was more serious than for C-SLCFST stub columns. Three stages can be identified in the stress-strain curves of SLCFST stub columns: an elastic stage, an elastic-plastic stage and a plastic stage. It is suggested that AIJ-1997, CECS 159:2004 or AIJ-1997, based on superposition theory, can be used to design the ultimate bearing capacity under axial compression for C-SLCFST and S-SLCFST stub columns; for varying replacement ratios of natural river sand, the calculated stress-strain curves for SLCFST stub columns under axial compression show good fitting to the test measure curves.

• Geomechanics and Engineering
• /
• v.34 no.6
• /
• pp.683-696
• /
• 2023

The destruction and fracture of rock masses are crucial components in engineering and there is an increasing demand for the study of the influence of rock mass heterogeneity on the safety of engineering projects. The numerical manifold method (NMM) has a unified solution format for continuous and discontinuous problems. In most NMM studies, material homogeneity has been assumed and despite this simplification, fracture mechanics remain complex and simulations are inefficient because of the complicated topology updating operations that are needed after crack propagation. These operations become computationally expensive especially in the cases of heterogeneous materials. In this study, a heterogeneous model algorithm based on stochastic theory was developed and introduced into the NMM. A new fracture algorithm was developed to simulate the rupture zone. The algorithm was validated for the examples of the four-point shear beam and semi-circular bend. Results show that the algorithm can efficiently simulate the rupture zone of heterogeneous rock masses. Heterogeneity has a powerful effect on the macroscopic failure characteristics and uniaxial compressive strength of rock masses. The peak strength of homogeneous material (with heterogeneity or standard deviation of 0) is 2.4 times that of heterogeneous material (with heterogeneity of 11.0). Moreover, the local distribution of parameter values can affect the configuration of rupture zones in rock masses. The local distribution also influences the peak value on the stress-strain curve and the residual strength. The post-peak stress-strain curve envelope from 60 random calculations can be used as an estimate of the strength of engineering rock masses.

• Asia-Pacific Journal of Business
• /
• v.12 no.3
• /
• pp.1-36
• /
• 2021

Purpose - This empirical study, aims to identify the determinants of adoption and acceptance of mobile payment as to understand why it is successful in some countries in Sub-Saharan Africa but failing in others. A comparative study of a successful mobile payment service and a purported failed one was done as to have some insights to the factors affecting acceptance of the technology. Design/methodology/approach - The strength of three notable theories: theory of diffusion of innovation (DOI), the extended unified theory of user acceptance of information technology (UTAUT2) and self-efficacy theory were use. The self-efficacy of government support inclusion as, a moderating variable in the form of infrastructure, securing transaction and price value revealed the relevance of government in the success of mobile payment service. By means of a field survey of 705 subjects in two separate regions of Africa (East and West), the data was collected and use to test the research model. Findings - The study result shows the importance of the moderating factor of government support to the success of mobile payment of any nation. The result also shows the importance of the perception of relative advantage, compatibility, complexity, social influence as already revealed by other studies. Research implications or Originality - Mobile payment success in some part of Sub-Saharan Africa is well known but also suggested to fail in some Sub-Saharan African countries. Buttressing the need for understanding of the factors affecting mobile payment acceptance. This article empirically examined the factors influencing the success of mobile payment, and we implicated that if the implementation of mobile payment is to be successful for mobile commerce in any nation, adoption, acceptance and use by its citizen is imperative.

• Steel and Composite Structures
• /
• v.31 no.1
• /
• pp.13-25
• /
• 2019

Reactive powder concrete (RPC) is a type of ultra-high strength concrete that has a relatively high brittleness. However, its ductility can be improved by confinement, and the use of RPC in composite RPC filled steel tube columns has become an important subject of research in recent years. This paper aims to present an experimental study of axial capacity calculation of RPC filled circular steel tube columns. Twenty short columns under axial compression were tested and information on their failure patterns, deformation performance, confinement mechanism and load capacity were presented. The effects of load conditions, diameter-thickness ratio and compressive strength of RPC on the axial behavior were further discussed. The experimental results show that: (1) specimens display drum-shaped failure or shear failure respectively with different confinement coefficients, and the load capacity of most specimens increases after the peak load; (2) the steel tube only provides lateral confinement in the elastic-plastic stage for fully loaded specimens, while the confinement effect from steel tube initials at the set of loading for partially loaded specimens; (3) confinement increases the load capacity of specimens by 3% to 38%, and this increase is more pronounced as the confinement coefficient becomes larger; (4) the residual capacity-to-ultimate capacity ratio is larger than 0.75 for test specimens, thus identifying the composite columns have good ductility. The working mechanism and force model of the composite columns were analyzed, and based on the twin-shear unified strength theory, calculation methods of axial capacity for columns with two load conditions were established.

• Steel and Composite Structures
• /
• v.1 no.1
• /
• pp.51-74
• /
• 2001

A series of tests on concrete-filled SHS (Square Hollow Section) stub columns (twenty), columns (eight) and beam-columns (twenty one) were carried out. The main parameters varied in the tests are (1) Confinement factor (${\xi}$) from 1.08 to 5.64, (2) concrete compression strength from 10.7MPa to 36.6MPa, (3) tube width to thickness ratio from 20.5 to 36.5. (4) load eccentricity (e) from 15 mm to 80 mm and (5) column slenderness (${\lambda}$) from 45 to 75. A mechanics model is developed in this paper for concrete-filled SHS stub columns, columns and beam-columns. A unified theory is described where a confinement factor (${\xi}$) is introduced to describe the composite action between the steel tube and filled concrete. The predicted load versus axial strain relationship is in good agreement with stub column test results. Simplified models are derived for section capacities and modulus in different stages of the composite sections. The predicted beam-column strength is compared with that of 331 beam-column tests with a wide range of parameters. A good agreement is obtained. The predicted load versus midspan deflection relationship for beam-columns is in good agreement with test results. A simplified model is developed for calculating the member capacity of concrete-filled SHS columns. Comparisons are made with predicted columns strengths using the existing codes such as LRFD (AISC 1994), AIJ (1997), and EC4 (1996). Simplified interaction curves are derived for concrete-filled beam-columns.

• Magazine of the Korea Concrete Institute
• /
• v.10 no.4
• /
• pp.113-124
• /
• 1998

Numerical study using nonlinear finite element analysis is done for investigating behavior of isolated reinforced concrete walls subject to combined in-plane and out-of-plane bending moments and axial force. A method for estimating the ultimate strength of wall is developed, based on the analytical results. For the nonlinear finite element analysis, a computer program addressing material and geometric nonlinearities is developed. An existing unified method combining plasticity theory and damage model is used for material model of reinforced concrete. By numerical studies, the internal force distribution in the cross section is idealized, and a new method for estimating the ultimate strength of wall is developed. According to the proposed method, variation of the interaction curve of in-plane bending moment and axial force depends on the range of the permissible axial force per unit length that is determined by the given amount of out-of-plane bending moment. As the out-of-plane bending moment increases, the interaction curve shrinks, which indicates a decrease in the ultimate strength. The proposed method is compared with an existing method using the general assumption that strain shall be directly proportional to the distance from the neutral axis. Compared with the proposed method, the existing method overestimates the ultimate strength for walls subject to low out-of-plane bending moments, and it underestimates the ultimate strength for walls subject to high out-of-plane bending moments.

• Journal of National Security and Military Science
• /
• s.8
• /
• pp.239-270
• /
• 2010

This thesis is to make an appropriate national defense policy of Republic of Korea through studying the Hegemony Strategy of United States. I searched the theory of hegemony. The hegemony was differently defined by the point of time and region. The strong power nations with the hegemony have been making efforts to maintain their hegemony everytime. I have conclusion that the presence of hegemony once emerged, it brought regional stability in place whether it is coercive or beneficial. The stability and instability of international order IS not exclusively dependent on hegemony. Even if the safety of hegemony cannot guarantee absolute stability of international order, there IS on doubt that the hegemony has enormous impact on that. According to the hegemonic theory, the history of mankind equals to the history of rising and falling hegemony. The international order was changed as the hegemony changes. The United States has been making efforts to maintain her global hegemony during the post cold-war era as well. Taking all these into consideration, relevant military strategy direction able to pursue national interest is that to make up for the relative weakness in the strategic environment. South Korea have to prepare security policy response as following. First, South Korea should build the military force equipped with advanced weapons in military technology sector and solidify military diplomatic relation able to form cooperative relation in wartime. Second, South Korea should make solid Alliance of Korea and U.S. Third, develop and maintain multilateral security cooperation of East Asia. Forth, we could realize that there are means that can neutralize opponent's strong point by seeking one or two and more asymmetry in the aspect of strategy, tactics, and means through asymmetric strategy. Than the military force of South Korea should develop into a force that is able to overcome to the traditional North Korea's threat and new type of conflicts. And the force should have sufficient strength and be deployed to effectively defend the Korean Peninsula. So, we need to establish a denial and defense system against any hostile neighboring country. Therefore, ROK military forces preparing for the future should try to construct a future military power to gradually establish enough strength for self-defense to prepare for a uncertain security environment and when the Korean Peninsula is unified in a future.