• Proceedings of the KIPE Conference
• /
• 2001.07a
• /
• pp.205-210
• /
• 2001

A new single stage power factor corrected AC/DC converter has been proposed, that is unified with buck topology and suitable for universal input. The design example of the proposed converter lot 5V 12A application has been presented. The design considerations and simulation results for the proposed converter have been shown. The simulation results show that the line input current harmonics can meet IEC 1000-3-2 Class D requirements for the line input voltage from 90 to 260V.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.6
• /
• pp.1058-1066
• /
• 2011

This research paper on Tac-ELINT SW development method using M&S system describes the validation and verification methods of Tac-ELINT ground operating software development each stages, and the method of improving reusability of software using SBD(Simulation Based Design/Development) concept. In this project, We obtain the EW software SBD technologies and improved Tac-ELINT ground operating software through software crisis mitigation. This method and technology will expect to support a future EW system and any other various weapon software development.

• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.2
• /
• pp.79.3-79.3
• /
• 2019

GMACS is one of the first light instruments for the Giant Magellan Telescope (GMT). The development of GMACS control software follows Agile software development process, and the design of the software is based on the Unified Model Language (UML). In this poster, we present the architecture of the GMACS software and the development processes. As an example of the software development, we show the software of the Slit Mask Exchange Mechanism Prototype (SMEM-P) which is part of the GMACS Device Control Package (DCP).

• Proceedings of the KIPE Conference
• /
• 2020.08a
• /
• pp.205-208
• /
• 2020

This paper examines the approach, enabled by using SiC power devices, to unify the inverter design for central air conditioning (CAC) system for both single- and 3-phase input, and reduce the PFC inductor size to be PCB-mountable. By using SiC-instead of Si-diode in PFC stage, it is possible to increase the switching frequency from 16kHz to 60kHz to reduce the required PFC inductance from 0.93mH to 0.25mH, thus enable PCB-mounting of inductor. With the next step of using 1200V SiC MOSFET instead of Si-IGBT, the DC link voltage can be boosted from 311Vdc to 550Vdc in PFC stage, allowing the inverter and compressor used in 3-phase input CAC be used for single-phase input as well. Furthermore, using SiC MOSFET in inverter stage can further reduce total loss system total loss to 200.8 W. Simulation and experimental results are presented in the paper.

• Journal of KIISE:Computing Practices and Letters
• /
• v.6 no.4
• /
• pp.393-402
• /
• 2000

The Unified Modeling Language(UML) became the standard object oriented modeling language approved by Object Management Group(OMG). However, C++ codes which are generated by some CASE tools supporting UML do not reflect the correct semantics of one-to-many relationship and aggregation relationship. Additionally, since the commercial CASE tools support too many programming languages on one UML class diagram, they do not support efficiently the characteristics of C++ language. Our C++ code generator supports one-to-many relationship, aggregation relationship, code patterns and design patterns. In this paper, we describe design and implementation of the efficient C++ code generator based on UML class diagram.

• The Research Journal of the Costume Culture
• /
• v.19 no.6
• /
• pp.1334-1346
• /
• 2011

This study focused on the beoseon, traditional Korean socks that are a fashion item showcasing the beauty of the round hanbok shape. The study utilized the beoseon as an influential design motif and suggested 24 cultural fashion items to which the beoseon can be applied, including neckties, scarves, and T-shirts. For the purposes of this study, Adobe Illustrator CS3 and Adobe Photoshop CS3 were used for the motif design as well as the literature review on traditional beoseon socks. For the basic design motif, two basic forms were taken from the collection of the National Folk Museum of Korea. The key point of the motif development is that it maintains the basic shape of the beoseon but highlights the attractiveness of the Korean image by using repetition, rotation, symmetry and overlap into a new image pattern so that modern and chic images were taken into consideration for each cultural product. For the necktie, the mixed or repeated patterns for each motif were used as is. Alternatively, an oblique line pattern was adopted to express a stable and stylish image. For the T-shirt, a round-neck sleeveless type was designed. T-shirts were unified in the white color to highlight the image from the pattern. For the scarf, two shapes were displayed, square and rectangle. Through mixture of two repeated variation unit patterns for each motif, a splendid and stylish image was revealed along with various layouts.

• Journal of Korea Multimedia Society
• /
• v.17 no.6
• /
• pp.751-758
• /
• 2014

Under the environment of various network and multimedia, various theories are studied to make utilize digital story telling authoring. In the era of digital convergence and ubiquitous information, they want to send information with additional emotional information which is preferred constructive sending method. Digital storytelling refers to a unified technology for narrative structure with the picture and act. If engraft with particular research field, It will make interactive or linear story structure. These structures have problems that they are mismanaging on the result and they are not integrated systemization in each society. Because those are designing storytelling without development process and they are focusing on web distribution. This thesis is design using the object-oriented methodology of component-based design methodology, This thesis create digital storytelling and design metadata for contents management. In the requirement phase, subject and predicate part are extracted from the narrative structure of the story and restructure an organization. We explain by giving specific examples "kongjwi and patjwi" story as a case study.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05b
• /
• pp.197-200
• /
• 2006

The ingress of chloride ions plays a crucial role for service life design of reinforced concrete structures. In view of durability design of concrete structures under marine environment, one of the most essential parameters is the surface chloride content of concrete. However, on the basis of the results of in-situ investigation, this value has been determining in the numerous studies on the durability design of concrete structures. Hence, it is necessary to confirm the range of the surface chloride content in order to establish a unified durability design system of concrete. This study suggests a rational and practical way to calculate the maximum surface chloride content of submerged concrete under marine environment. This approach starts with the calculation of the amount of chloride ingredients in normal sea water. The capillary pore structure is modeled by numerical simulation model HYMOSTRUC and it is assumed to be completely saturated by the salt ingredients of sea water. In order to validate this approach, the total chloride content of the mortar and concrete slim disc specimen was measured after the immersion into the artificial sea water solution. Additionally, the theoretical, the experimental and in-situ investigation results of other researchers are compiled and analyzed. Based on this approach, it will follow to calculate the maximum surface chloride content of concrete at tidal zone, where the environment can be considered as a condition of dry-wetting cycles.

• Computers and Concrete
• /
• v.1 no.3
• /
• pp.303-324
• /
• 2004

The Component-Based Software Development (CBSD) has established itself as a sound paradigm in the software engineering discipline and has gained wide spread acceptance in the industry. The CBSD relies on the availability of standard software components for encapsulation of specific functionality. This paper presents the framework for the development of a software component for the design of general member cross-sections. The proposed component can be used in component-based structural engineering software or as a stand-alone program developed around the component. This paper describes the use-case scenarios for the component, its design patterns, object models, class hierarchy, the integrated and unified handling of cross-section behavior and implementation issue. It is expected that a component developed using the proposed patterns and model can be used in analysis, design and detailing packages to handle reinforced concrete, partially prestressed concrete, steel-concrete composite and steel sections. The component can provide the entire response parameters of the cross section including determination of geometric properties, elastic stresses, flexural capacity, moment-curvature, and ductility ratios. The component can also be used as the main computational engine for stand-alone section design software. The component can be further extended to handle the retrofitting and strengthening of cross-sections, shear and torsional response, determination of fire-damage parameters, etc.

• The Journal of Society for e-Business Studies
• /
• v.7 no.1
• /
• pp.153-166
• /
• 2002

Nowadays an information exchange on Bn such as B2B electronic commerce is spreading. Therefore the systematic and stable management mechanism for storing the exchanged information is needed. For this goal there are many research activities for connection between XML application and relational database. But because XML data have hierarchical structures and relational database can store only flat-structured data, we need to store XML data in object-relational database that support hierarchical structure. Accordingly the modeling methodology for storing XML data in object-relational database is needed. In order to build good quality application systems, modeling is an important first step. In 1997, the OMG adopted the UML as its standard modeling language. Since industry has warmly embraced UML its popularity should become more important in the future. So a design methodology based on UML is need to develop efficiently XML applications. In this paper, we propose a unified design methodology for In applications based on object-relational database using In. To this goal, first we introduce a XML modeling methodology to design W3C XML schema using UML and second we propose data modeling methodology for object-relational database schema to store efficiently XML data in object-relational databases.