• Journal of the Korean Society of Safety
• /
• v.29 no.1
• /
• pp.31-36
• /
• 2014

In this study, the methodologies for evaluating the low-flow at the ungauged watershed are reviewed and assessed. The ungauged watershed can be classified into different situations such as the partially recorded watershed and the completely ungauged watershed. The extension method and the percentile method are used to evaluated the low-flow at the partially recorded watershed. The drainage-area ratio method and the regional regression method are used at the completely ungauged watershed. These four methods are applied and validated based on the hydrological and geometric data acquired from unit watersheds in Han River basin for TMDLs. In case of partially recorded watershed, the values of low-flow evaluated by the extension method are in better agreement with measured flow-rate rather than those by the percentile method. In case of completely ungauged watershed, the drainage-area method is broadly used to estimate the low-flow. It must be paid attention to consider the treated sewage discharge produced at watersheds when applying the method.

• Journal of Korean Society on Water Environment
• /
• v.26 no.3
• /
• pp.532-539
• /
• 2010

The synthetic unit hydrograph is developed and verified using Nash model and characteristic velocities considering geomorphological dispersion in this present study. Application watersheds are selected 5 subwatersheds of Bocheong basin. The mean and variance of hillslope and stream path length are estimated in each watershed with GIS. Characteristic velocities are calculated using estimated path lengths and moment characteristics of rainfall-runoff data. Characteristic velocities of random devised 7 ungauged watersheds are estimated through regional analysis of chracteristic velocities in guaged watershed. And Nash model parameters and IUH are derived using characteristic velocities and path length in the gauged and ungauged watershed. The result to compare of IUH about gauged watershed and random devised ungauged watershed in application watershed presents coherently hydrologic response characteristics that peak discharge is reduced and peak time is extended. In conclusion, Developed synthetic unit hydrograph in this study expects that it is useful method to estimate runoff discharge for managing of water pollution in ungauged watershed.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 1998.10a
• /
• pp.370-375
• /
• 1998

The objectives of this study are to evaluate the applicability of SCS TR-20 model for small ungauged watershed, to show the behavior of the model with variation of topography in watershed, and to evaluate the storage effect of paddy field for flood flow. For this purpose, simulated data from the model were compared with the observed flood data at two sites (HS#3, HS#4) in Balan watershed. From the comparison between simulated and observed data, it was found that the model is applicable to this watershed.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.54 no.6
• /
• pp.169-176
• /
• 2012

This study describes the estimation of upstream ungauged watershed streamflow using downstream discharge data. For downstream Dongchon (DC) and upstream Kumho (KH) water level stations in Kumho river basin ($2,087.9km^2$), three methods of Soil and Water Assessment Tool (SWAT) modeling, drainage-area ratio method and regional regression equation were evaluated. The SWAT was calibrated at DC with the determination coefficient ($R^2$) of 0.70 and validated at KH with $R^2$ of 0.60. The drainage-area ratio method showed $R^2$ of 0.93. For the regional regression, the watershed area, average slope, and stream length were used as variables. Using the derived equation at DC, the KH could estimate the flow with maximum 41.2 % error for the observed streamflow.

• Spatial Information Research
• /
• v.17 no.2
• /
• pp.223-239
• /
• 2009

The low fow analysis for small-mid sized river basins is very difficult because of insufficient flow data or ungauged basins. The objective of this study is to suggest effective method of low flow using area function method for calculating Total Maximum Daily Loads (TMDL) by considering environmental carrying capacity. Two watersheds which are Juchon watershed having $606km^2$ areas and ungauged watershed having $4,551km^2$ areas were selected for this study. As a result of application, the low flow in the downstream of Juchon River and the Han River after confluence of Okdong River were $1.9m^3/s$ and $20.7m^3/s$, respectively. Then we consider the target BOD of 1.0-1.2mg/l in Youngwol prefecture, the TDML was estimated 164-197kg/day and 1,788-2,146kg/day, respectively. This approach will useful for estimating TDML to insufficient watershed of flow data and ungauged watershed of flow data.

• KCID journal
• /
• v.18 no.2
• /
• pp.87-100
• /
• 2011

This study is to delineate the watershed hydrological parameters such as area, slope, rain gauge weight, NRCS-CN and time of concentration (Tc) by using the Geographic Information Sytem (GIS) technique, and estimation of design flood for an ungauged watershed. Especially, we attempted to determine the Tc of ungauged watershed and develop simple program using the cell-based algorithm to calculates upstream or downstream flow time along a flow path for each cell. For a $19km^2$ watershed of tributary of Nakdong river (Seupmoon), the parameters including flow direction, flow accumulation, watershed boundary, stream network and Tc map were extracted from 30m Agreeburn DEM (Digital Elevation Model) and landcover map. And NRCS-CN was extracted from 30m landcover map and soil map. Design rainfall estimation for two rainfall gauge which are Sunsan and Jangcheon using FARD2006 that developed by National Institute for Disaster Prevention (NIDP). Using the parameters as input data of HEC-l model, the design flood was estimated by applying Clark unit hydrograph method. The results showed that the design flood of 50 year frequency of this study was $8m^3/sec$ less than that of the previous fundamental plan in 1994. The value difference came from the different application of watershed parameter, different rainfall distribution (Huff quartile vs. Mononobe) and critical durations. We could infer that the GIS-based parameter preparation is more reasonable than the previous hand-made extraction of watershed parameters.

• Korean Journal of Remote Sensing
• /
• v.35 no.5_2
• /
• pp.781-796
• /
• 2019

This study attempted to simulate the flood discharge in the Duman River basin containing Hoeryong City and Musan County of North Korea where were damaged from Typhoon Lionrock on August, 2016. For hydrological modelling remotely sensed datasets were used to estimate watershed properties and hydrologic factors because the basin is ungauged where hydrological observation is not exist or sparse. For validation we applied our methodology and datasets to the Soyanggang Dam basin. It has not only similar shape factor and compactness ratio to those of the target basin but also accurate, adequate, and abundant measurements. The results showed that the flood discharge from Typhoon Lionrock corresponded to three to five years design floods in the Duman River basin. This indicate that the Duman River basin has a high risk of flood in the near future. Finally this study demonstrated that remotely sensed data and geographic information could be utilized to simulate flood discharge in an ungauged watershed.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.57 no.4
• /
• pp.121-133
• /
• 2015

The TANK model has been widely used in rainfall-runoff modeling due to its simplicity of concept and computation while achieving forecast accuracy. A major barrier to the model application is to determine parameter values for ungauged watersheds, leading to the need of a method for the parameter estimation. The objective of this study was to develop regression equations for estimating the 3th TANK model parameters considering their variations for the ungauged watersheds. Thirty watersheds of dam sites and stream stations were selected for this study. A genetic algorithm was used to optimize TANK model parameters. Watershed characteristics used in this study include land use percent, watershed area, watershed length, and watershed average slope. Generalized equations were derived by correlating to the optimized parameters and the watershed characteristics. The results showed that the TANK model, with the parameters determined by the developed regression equations, performed reasonably with 0.60 to 0.85 of Nash-Sutcliffe efficiency for daily runoff. The developed regression equations for the TANK model can be applied for the runoff simulation particularly for the ungauged watersheds, which is common for upstream of agricultural reservoirs in Korea.

• Journal of Korean Society on Water Environment
• /
• v.34 no.5
• /
• pp.537-547
• /
• 2018

Sediment discharge by rainfall runoff affects water quality in rivers such as turbid water, eutrophication. In order to solve various problems caused by soil loss, it is important to establish a sediment management plan for watersheds and rivers in advance. However, there is a lack of sediment data available for estimating sediment discharge in ungauged basins.. Thus, reasonable research is very important to evaluate and predict the sediment discharge quantitatively. In this study, cluster analysis was conducted to classify gauged watersheds into hydrologically homogeneous groups based on the watershed characteristics. Also, this study suggests a method to efficiently predict the sediment discharge for ungauged basins by developing and evaluating the SDR equations based on the PA-SDR module. As the result, the SDR equations for the classified watersheds were derived to predict the most reasonable sediment discharge of ungauged basins with 0.24 % ~ 10.89 % errors. It was found that the optimal parameters for the gauged basins reflect well characteristic of sediment movement. SDR equations proposed in this study will be available for estimating sediment discharge on ungauged basins. Also it is possible to utilize establishing the appropriate sediment management plan for integrated management of watershed and river in Korea.

• Journal of Korean Society on Water Environment
• /
• v.24 no.1
• /
• pp.7-18
• /
• 2008

The objective of this study was to develop and apply a water quality simulation model for the evaluation of ungaged watershed. The Modified WASP5 consisted of three sub-models, LOAD-M, DYN-M, and EUT-M. LOAD-M, an empirical model, estimates runoff loadings using point and non-point source data of villages. Daecheong Dam watershed was selected for the research to calibrate, verify and application of Modified-WASP5. LOAD-M model was established using field data collected from all items of water quality and water quantity gaging stations of the watersheds, and was applied to the ungauged watersheds, taking the watershed properties under consideration. The result of water quality simulation using ModifiedWASP5 shows that the observed BOD data of Yongpo and Daechong Dam in 1999 were 0.8 mg/L and 1.0 mg/L, and simulated data were 0.9 mg/L and 0.9 mg/L, respectively. In case of 1999, average BOD concentrations were 0.8 mg/L and 1.0 mg/L. Simulated concentration showed 1.1 mg/L and 1.5 mg/L, respectively. Generally, the simulation results were in good agreement with the observed data. This study was focused on formulating an integrated model for evaluating ungauged watersheds. Even though simulation results varied slightly due to limited availability of data, the model developed in this study would be a useful tool for the assessment and management of ungauged watersheds.