• Journal of IKEEE
• /
• v.19 no.2
• /
• pp.244-253
• /
• 2015

Please This paper presents method of video stabilization based on detection and adaptive motion smoothing filtering of undesirable motion. The proposed algorithm consists of two stages: the detection of undesirable motion and smoothing filtering of detected undesired motion. To incorporate desired properties into the motion smoothing process, the local maximum and the local minimum are defined in a set composed of the parameters of accumulative global motion. Using the local information, the constraints on detecting undesirable motions are defined. Based on these constraints, the alpha parameter of the alpha-trimmed means filter is adjusted, so that the degree of motion smoothing in the reconstructed video sequence is controlled. The experimental results demonstrated the capability of the proposed algorithm.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.396-399
• /
• 2003

This paper proposes a simple digital image stabilization(DIS) algorithm for roll motion, which has not been compensated in the 2-axes mechanical stabilization system, using aero-crossing of the rotational motion vectors. The 2-axes stabilization system cannot stabilize rolled images, which causes the deteriorated performance of the object detection and recognition. In this paper, we propose the rotational motion stabilization algorithm which estimates and compensates global motion in terms of rotational center and rotational angle. Both the synthetic images with undesirable rotational disturbance and the real images from 2-axes stabilization system are used to evaluate the proposed algorithm. The results show that our proposed algorithm suppresses the undesirable rotational disturbance effectively.

• Journal of the Ergonomics Society of Korea
• /
• v.8 no.1
• /
• pp.41-46
• /
• 1989

The purpose of this study is to improve robot motion control in teaching and operating the expert system/world coordinate system (TOES/WCS) constructed in the previous study. The major contribution of this study is reduction of the inaccuracy in coordinated reading and the movement time of robots in macro motion control. This study also reduces undesirable time of micro motion control by using an unit control (UC) and a micro unit control (MUC) in micro motion control.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.469-472
• /
• 2005

In this paper, we propose a new deinterlacing algorithm based on motion estimation and compensation with variable block size. Motion compensated methods using a fixed block size tend to produce undesirable artifacts when there exist complicated motion and high frequency components. In the proposed algorithm, the initial block size of motion estimation is determined based on the existence of global motion. Then, the block is divided depending on block characteristics. Since motion compensated deinterlacing may not always provide satisfactory results, the proposed method also use an intrafield spatial deinterlacing. Experimental results show that the proposed method provides noticeable improvements compared to motion compensated deinterlacing with a fixed block size.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1800-1803
• /
• 1997

This paper presents new feedback actuators to achieve an accurate position control of a flexible gnatry robot arm. the translational motion in the plane is generated by two d.c.motors and controlled by emplying elecor-rheological(ER) clutch acutators. The generated motion can be continuously controlled by controlling the intensity of lectric field imposed to the ER fluid domain which tunes the transmitted torque of the ER clutch. n the other hand, during control action of the translational motion a flexible arm attached to the moving mass produces undesirable oscillatins due to its inherent flexibility. The oscillations are actively suppressed by applying feedback voltages to piezoceramic acutators bonded on the surface of the flexible arm. The control electric fields to be applied to the ER clutch and the control voltage for the piezoceramic actuator are determined via the loop shaping esign procedures(LSDP) in the H.inf. control technique. Comsequently, an accuate positiion control at the end-point of the flexible am is achieved during planar motion.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.6
• /
• pp.1371-1381
• /
• 1995

A novel hybrid control scheme to actively control the endpoint position of a very flexible single-link manipulator is proposed. The control scheme consists of a motor mounted at the beam hub and a piezofilm actuator bonded to the surface of the flexible link. The control torque of the motor to produce a desired motion is firstly determined by employing the sliding mode control theory on the equation of motion of the rigid link having the same mass as that of the proposed flexible link. The torque is then applied to the flexible manipulator in order to activate the commanded motion. During the motion, undesirable oscillation is actively suppressed by applying a feedback control voltage to the piezofilm actuator. Consequently, the imposed desired position is accomplished. In order to demonstrate high control performances accrued from the proposed method, computer simulations are undertaken by treating both regulating and tracking control problems.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.54 no.4
• /
• pp.343-352
• /
• 2018

In this study, a motion control problem for the vessels towed by tugboats or towing ships on the sea is considered. The towed vessel looks like the barge ship, which is used for many purposes. In these vessels, basically, the power propulsion system is not installed but just towed by a towing vessel such as tugboats with ropes and wires. It means that the motions of towed vessel are basically dependent on the tracking route of towing boat. Therefore, in some cases, undesirable and unpredictable motions may be made by environmental factors such as wave, wind attack and so on. As a result, a collision accident with others may occur during maneuvering situation. Based on these facts, the authors try to encourage the steering performance of the towed vessel by using controllable rudders without any propulsion system. In this study, especially, a controllable vessel with three rudders is considered, and a mathematical model is induced for the future study. The model is described as surge, sway motion and inertia moment by following the general representation method for the surface ship.

• Proceedings of the KIEE Conference
• /
• 1991.11a
• /
• pp.401-404
• /
• 1991

In this paper, the controllers for the motion of the 2-joint manipulator design two stages: (1) a primary controller that under ideal conditions makes the end-effector track the desired trajectory: (2) a secondary controller that compensates for undesirable deviations of the motion from the disired trajectory caused by external and/or internal disturbances. The secondary contoller is applied to PID control algorithm. and the controllers is actually designed using IBM-PC/AT and 8096 single chip microprocessor.

• Journal of Korean Institute of Industrial Engineers
• /
• v.12 no.2
• /
• pp.1-11
• /
• 1986

This study is concerned on computerized analysis of COG, torques and EMG amplitudes in weight-lifting motion. The results show that; (1) torques on major joints show a rather consistent relationship with respect to the sequence of four distinct motions in weight-lifting, (2) analysis of EMG amplitudes is a sensitive measure of both athlete's skill and his potential capability, and (3) range of COG variations can be used as indicator of motion stability, existence of undesirable posture, and target muscle for intensive training. A computerized routine, which includes analyses on COG, EMG and torque, is a scientific tool for coaching athletes. In addition, an Expert System which includes CAD routine was developed in order to promote better understanding for athletes and coaches.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.722-725
• /
• 1996

This paper presents a new control strategy for the position and force control of a flexible manipulator. The governing equation of motion of a two-link flexible manipulator which features a piezoceramic actuator is derived via Hamilton's principle. The control torque of the motor to command desired position and force is determined by a sliding mode controller. This controller is formulated to take account of parameter uncertainties and external disturbances. During the commanded motion, undesirable oscillation is actively suppressed by applying a feedback control voltage to the piezoceramic actuator. Consequently, an accurate compliant motion control of the flexible manipulator is achieved. Computer simulations are undertaken in order to demonstrate the effectiveness of the proposed control methodology.