• 한국산학기술학회논문지
• /
• 제13권8호
• /
• pp.3704-3712
• /
• 2012

최근, 장대교량의 해상기초 구조물에 수중불분리성 콘크리트의 사용이 증가되고 있다. 그러나, 해상기초 구조물에 사용되는 수중불분리성 콘크리트의 공사기간을 단축시키기 위해서는 이전의 수중불분리성 콘크리트보다 유동성을 크게 개선시키는 고유동 수중불분리성 콘크리트의 제조가 필요하다. 따라서 본 연구의 목적은 해상기초 구조물에 사용되는 고유동 수중불분리성 콘크리트의 최적배합비를 도출하는 것이다. 이를 위하여 단위결합재량 550, 600kg/$m^3$ 각각에 대해서 수중불분리성 혼화제 첨가량별로 고로슬래그 미분말을 혼입한 콘크리트를 제작하였다. 제작된 콘크리트의 슬럼프 플로, 응결시간, 수중분리저항성 및 압축강도 비와 같은 품질성능을 관련 규격에 따라 평가하였다. 결국, 고로슬래그 미분말을 혼입한 고유동 수중불분리성 콘크리트는 관련 규격을 만족시키는 수중불분리성 혼화제의 최소 첨가량이 필요한 것으로 나타났다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.457-460
• /
• 2003

This paper discusses laboratory evaluations to assess the physical properties of antiwashout underwater concrete (AWC) containing pozzolanic materials such as fly ash (FA), blast furnace slag (SG) and metakaolin(MK). For the experiments, pH value, suspended solids, slump flow, efflux time and compressive strength were tested. According to the results from compressive strength test, MK10 showed the very high compressive strength characteristic during the entire curing days, but the rate of strength development was decreased as time goes by.

• 콘크리트학회지
• /
• 제26권3호
• /
• pp.22-25
• /
• 2014

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1996년도 가을 학술발표회 논문집
• /
• pp.380-386
• /
• 1996

This paper presents the history of heat hydration and the core strength of underwater non-segregation concrete. Three types of cements including Type I, Type V and low-heat cement have been used to make the mass specimens for measurement of heat of hydration and also for coring. Two environments of ambient and underwater conditions have been accounted for the comparison of producing the heat of hydration and for the assessment of core strength in respect to the test specimens made under normal practice.

• 콘크리트학회지
• /
• 제13권2호
• /
• pp.18-22
• /
• 2001

• 콘크리트학회지
• /
• 제13권2호
• /
• pp.23-29
• /
• 2001

• 콘크리트학회지
• /
• 제13권2호
• /
• pp.30-37
• /
• 2001

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(II)
• /
• pp.405-408
• /
• 2005

The repair and reinforcement materials of the concrete structure in underwater is use to epoxy mortar for underwater-harding. Because it ensures the separation of material and a fluidity in construction, it is important to epoxy mortar This study dealt with the influence of the using of rapidly-chilled steel slag on flow, nozzle passing time, viscosity, and strength of mortar by experimental design. As results of study, this paper proved that the more the using rate of rapidly chilled steel slag increased, the more this affected the enhancement of flow, the decrease of O-lot, and the development of compressive strength, flexural strength. Also, considering the fluidity, nozzle passing time and strength of mortar, it is desirable to use RCSS300 of rapidly chilled slag.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(II)
• /
• pp.409-412
• /
• 2005

Because the underwater structures are subjected to the deterioration according to use environment, it is necessary to repair and reinforce when the durable performances are considered in structures. In generally, epoxy mortar is used to repair materials of underwater concrete. It is divided epoxy and filler which is organized cement and sand. Cement can be replaced by stone powder sludge in waste because the grading of stone powder sludge in drying state has similar to that of cement. As result of study, it is possible that stone powder sludge can be applied for replacement materials of cement in epoxy mortar, because the strength is not different when filler in epoxy mortar is alternated stone powder sludge.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 봄 학술발표회 논문집
• /
• pp.301-307
• /
• 1997

This paper is evaluated for properties of aggregate and antiwashout admixture not only to minimize segregation and water contamination of underwater concrete but also to meet concrete quality required. Two antiwashout admixtures used in this study were available domestically and slump flow, pH, setting time, and filing property of fresh concrete and the compressive strength, flexural strength under water and in the air under 2 different curing conditions ($10^{\cire}C$ and $20^{\cire}C$ ) were measured. Compressive strength ratio of specimens cured in and water temperature $10^{\cire}C$ /$20^{\cire}C$ added HPEC and HPMC was 64% and 89%, respectively. Relative compressive strength of 2 kinds observed higher concrete added HPEC, 3% at $10^{\cire}C$ curing temperature, 34% at $20^{\cire}C$ . The flexural strength of specimens made under water was 1/4~1/6 of compressive strength similar to the existing data in the literature.