• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.100-106
• /
• 2008

Road on the urban underground railway has been repaired for several years right after completion caused by the settlement of backfill and the damage of utility lines, which demands the practical application of life-cycle cost on design of backfill. This study perform the VE and LCC Analysis to select a optimal method of backfill and present the models and factors of VE process in the consideration of specialists' opinion and judgement on the category of critical maintenance items.

• KEPCO Journal on Electric Power and Energy
• /
• v.7 no.2
• /
• pp.285-293
• /
• 2021

The construction of underground structures such as power supply lines, communication lines, utility tunnels has significantly increased worldwide for improving urban aesthetics ensuring citizen safety, and efficient use of underground space. Those underground structures are usually constructed along with vertical cylindrical shafts to facilitate their construction and maintenance. When constructing a vertical shaft through the open-cut method, the walls are mostly designed to be flexible, allowing a certain level of displacement. The earth pressure applied to the flexible walls acts as an external force and its accurate estimation is essential for reasonable and economical structure design. The earth pressure applied to the flexible wall is closely interrelated to the displacement of the surrounding ground. This study simulated stepwise excavation for constructing a cylindrical vertical shaft through a centrifugal model experiment. One quadrant of the axisymmetric vertical shaft and the ground were modeled, and ground excavation was simulated by shrinking the vertical shaft. The deformation occurring on the entire ground during the excavation was continuously evaluated through digital image analysis. The digital image analysis evaluated complex ground deformation which varied with wall displacement, distance from the wall, and ground depth. When the ground deformation data accumulate through the method used in this study, they can be used for developing shaft wall models in future for analyzing the earth pressure acting on them.

• Proceedings of the SAREK Conference
• /
• 2003.07a
• /
• pp.243-243
• /
• 2003

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.10 no.1
• /
• pp.1-6
• /
• 2011

The Underground pipeline facility is a general but most important facility in modern world, but its maintainability has been left behind. An automated and intelligent management technology is needed to prevent the wast of social resource and security. In this paper, we introduce Pipeline Health Monitoring(PHM) with Ubiquitous Sensor Network(USN) for inexpensive structure safety monitoring system, and improve its utility by inventing the advanced impedance converter.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.12 no.4
• /
• pp.48-58
• /
• 2009

In recent years, construction worker safety in construction site is important. Especially, the frequent collapse accidents have happened in tunnels, utility tunnel and underground structure, so that the importance of worker safety is greatly emphasized. It is difficult to communicate with other workers in underground space, using the current cable or wireless communicator. When the accident is occurred, it can't rescue workers. This is the reason that it has a deficiency to find a location of survivor and communicate rescure crew and field workers. In this paper we extract the optimal technical factors of USFSS(Underground Structure Field Support System) based on integrated technique of wireless communication and location awareness. And USFSS developed in this study is suited for bad environment of underground structure construction and able to track 3D position of laborer and communicate mutually.

• Journal of Broadcast Engineering
• /
• v.26 no.4
• /
• pp.390-397
• /
• 2021

As digital twin technology is applied to various industrial fields, technologies to effectively process large amounts of data are required. In this paper, we discuss a customized service method for fast search and effective delivery of large-scale data for underground facility for public utilities management. The proposed schemes are divided into two ways: a fast search data generation method and a customized information service segmentation method to efficiently search and abbreviate vast amounts of data. In the high-speed search data generation, we discuss the configuration of the synchronization process for the time series analysis of the sensors collected in the underground facility and the additional information method according to the data reduction. In the user-customized service method, we define the types of users in normal and disaster situations, and discuss how to service them accordingly. Through this study, it is expected to be able to develop a systematic data generation and service model for the management of underground utilities that can effectively search and receive large-scale data in a disaster situation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.4
• /
• pp.220-227
• /
• 2021

PCT (Power Cable Tunnel) and UT (Utility Tunnel), which are non-transport underground infrastructures, are mostly RC (Reinforced Concrete) structures, and their durability decreases due to the deterioration caused by carbonation over time. In particular, since the rate of carbonation varies by use and region, a predictive model based on actual carbonation data is required for individual maintenance. In this study, a carbonation prediction model was developed for non-transport underground infrastructures, such as PCT and UT. A carbonation prediction model was developed using multiple regression analysis and deep neural network techniques based on the actual data obtained from a safety inspection. The structures, region, measurement location, construction method, measurement member, and concrete strength were selected as independent variables to determine the dependent variable carbonation rate coefficient in multiple regression analysis. The adjusted coefficient of determination (Ra2) of the multiple regression model was found to be 0.67. The coefficient of determination (R2) of the model for predicting the carbonation of non-transport underground infrastructures using a deep neural network was 0.82, which was superior to the comparative prediction model. These results are expected to help determine the optimal timing for repair on carbonation and preventive maintenance methodology for PCT and UT.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.25 no.4
• /
• pp.285-303
• /
• 2023

Interest in building underground spaces is increasing for the creation of downtown infrastructure and efficient space utilization. A representative method of utilizing underground space is a tunnel, and in addition to road tunnels, the construction of utility tunnels such as power conduits and utility conduits is gradually increasing. The current basic tunnel construction method can be divided into NATM (New Austrian Tunnelling Method) and TBM (Tunnel Boring Machine). The NATM is a reliable method, but it is accompanied by vibration and noise due to blasting. In the case of the TBM excavation method, there are disadvantages in terms of construction period and construction cost, but it is possible to improve economic feasibility by introducing appropriate complementary methods. In this study, a blasting method was develop using the NATM after TBM pre-excavation using the protective shield method. This is a method that compensates for the disadvantages of each tunnel construction method, and is expected to reduce construction costs, blasting vibration, and noise. In order to review the performance of the developed method, an experiment was conducted to evaluate the performance of explosion-proof tube to which a protective shield scale model was applied, and the impact of blasting vibration of the protective shield method was analyzed.

• Korean Journal of Clinical Laboratory Science
• /
• v.37 no.3
• /
• pp.220-227
• /
• 2005

Recently, the use of an electrical apparatus has brought up concerns of health risks from exposure to electromagnetic fields. EMF is composed of electric fields and magnetic fields. Heavy exposure to EMF can occur only in the vicinity of high-voltage overhead transmission lines, close to transformers and underground cables, and also close to large electrical machinery. In this thesis I have investigated the hypothesis of the correlation between occupational exposure to ELF-EMF and the risks of leukemia, anemia, cancer. Therefore, the aim of this study is to investigate whether or not ELF-EMF emitted from electric power stations and transformer substations affect some hematological parameters and tumor markers of electric utility workers. The hematological test results and tumor markers under investigation were similar in the two groups but some of parameters such as RBC, AFP, LDH showed significant difference between the two groups from two sample t-test (p<0.05). The exposure group showed increased LDH level compared to the control group by two sample t-tests. In addition, the abnormal LDH level in the exposure group was observed to be clinically significant by ${\chi}^2$-test. However, the levels of RBC, AFP observed were not clinically significant by ${\chi}^2$-test (p>0.05). These results suggested that ELF-EMF does not affect most blood test parameters except LDH of electric utility workers.

• Journal of the Korean GEO-environmental Society
• /
• v.6 no.2
• /
• pp.31-38
• /
• 2005

Flowable fills are self-leveling, liquid-like materials, and self-compacting to 95-100% of the maximum unit weight. Benefits of flowable fills include limited required labor, accelerated construction, ready placement at inaccessible locations, and the ability to be manually re-excavated. Applications for flowable fills include utility trenches, building excavations, underground storage tanks, abandoned sewers and utility lines, and filling underground mine shafts The objective of this study is to estimate engineering property of flowable fills made of soil mixed with recycled stylofoam and stabilizer for using geotechnical field. For this study, the uniaxial compression test, flowable test, and model tests were performed. Based on the results of the tests, the following conclusions are : fills made of soil mixed with recycled stylofoam and stabilizer can be used as flowable fills, minimum stabilizer quantity for using flowable fills ranges from 1.0($kN/m^3$) to 1.2 ($kN/m^3$).