• Resources Recycling
• /
• v.5 no.3
• /
• pp.56-64
• /
• 1996

C,H,OH system is widely used for producing synthetic beverages and pharmaceuticals. Calcium hydroxide suspension was used to callhol the morphology of calcium carbonate, and the charactenstics of the formahan and crystsllizatian of calcium cilrbonate by adding ethylenc glycol were determined A reaclor was made with attaching a ceramic bubble plate, and lhe eleclrical conductivity was continously monitored during the rcaction with CO, gas. A part of the suspension was separated and powdered at the transition point. XRD and electron microscopic observation showed that the intermedmte and final products were vilterite, ;~r;lganite and calcite. In this study, the volumc of the ethylene glycol added to CH,OH was fixed a1 10 vol\ulcornerh. The valumc of the suspension was 500 ml, and the changes oi characteristics were shdied along with variims cnntents(l0-50 g) of calcium hydroxide. Except m the case of 10 g of calcium hydroxide at the crystallization stagc, all of products showed gelation. Tne marc the calcium hydroxide the shorter the formation time. Alsa. the farmalion of spherical valcrile ivas obsemcd when 30 g Ca(OH), was added. Tne vaterite(a compound material) can bc synthesised under alnbienl pressure and lempcmhre m a C,H,OH system by morphology control. Even though the vateritc was meta-stable phasc and could bc changed to calcitc easily, the stable and spherical vateritc was observed by using G5 glass fillers and vacuum dricrs.

• Resources Recycling
• /
• v.25 no.3
• /
• pp.29-36
• /
• 2016

The characteristics analysis and pH neutralization test were carried out to use of slurry generated from recycling processes of construction wastes. D (5.0) of raw sludge was $42.4{\mu}m$ and over 60 % of sludge distribute under 45 um (-325 mesh). Muscovite and carbonate minerals were main minerals of fine particles, and the portion of carbonate minerals increased as particle size decreased. Although the more heavy metals were observed in the finer particle size, the contents was found to be less than Korean contaminated soil regulation (area 2). The effects of flocculants addition for accelerating solid-liquid separation were negligible because the slurry already contains excess of coagulant added in the waste concrete recycling process. It was difficult to neutralize the sludge supernatant due to high pH (about 12) by adding acids, but the introduction of $CO_2$ decreased the pH to 8.5, The precipitate recovered during $CO_2$ introduction was determined to be $CaCO_3$ with XRD, and it indicates that high pure $CaCO_3$ could be obtained during the process.

• Resources Recycling
• /
• v.18 no.2
• /
• pp.39-50
• /
• 2009

Portland cement production is under critical review due to high amount of $CO_2$ gas released to the atmosphere. Attempts to increase the utilization of fly ash, a by-products from thermal power plant to partially replace the cement in concrete are gathering momentum. But most of fly ash is currently dumped in landfills, thus creating a threat to the environment. Many researches on alkali-activated concrete that does not need the presence of cement as a binder have been carried out recently. Instead, the source of material such as fly ash, that are rich in Silicon(Si) and Aluminium(Al), are activated by alkaline liquids to produce the binder. Hence concrete with no cement is effective in the reduction of $CO_2$ gas. In this study, we investigated the influence of the compressive strength of mortar on alkaline activator and curing condition in order to develop cementless fly ash based alkali-activated concrete. In view of the results, we found out that it was possible for us to make alkali-activated mortar with 70MPa at the age of 28days by using alkaline activator manufactured as 1:1 the mass ratio of 9M NaOH and sodium silicate and applying the atmospheric curing after high temperature at $60^{\circ}C$ for 48hours.

• Journal of Soil and Groundwater Environment
• /
• v.10 no.4
• /
• pp.54-61
• /
• 2005

An aquifer thermal energy storage (ATES) system can be very cost-effective and renewable energy sources, depending on site-specific parameters and load characteristics. In order to develop the ATES system which has certain hydrogeological characteristics, understanding the thermohydraulic process of an aquifer is necessary for a proper design of an aquifer heat storage system under given conditions. The thermohydraulic transfer for heat storage was simulated according to two sets of simple pumping and waste water reinjection scenarios of groundwater heat pump system operation in a two-layered aquifer model. In the first set of the scenarios, the movement of the thermal front and groundwater level was simulated by changing the locations of injection and pumping wells in a seasonal cycle. However, in the second set the simulation was performed in the state of fixing the locations of pumping and injection wells. After 365 days simulation period, the shape of temperature distribution was highly dependent on the injected water temperature and the distance from the injection well. A small temperature change appeared on the surface compared to other simulated temperature distributions of 30 and 50 m depths. The porosity and groundwater flow characteristics of each layer sensitively affected the heat transfer. The groundwater levels and temperature changes in injection and pumping wells were monitored and the thermal interference between the wells was analyzed to test the effectiveness of the heat pump operation method applied.

• Korean Journal of Veterinary Research
• /
• v.42 no.1
• /
• pp.35-43
• /
• 2002

Cryopreservation is commonly used for an efficient utilization of semen, oocytes and embryos but has disadvantage in the survival, development of the post-thawed eggs. The high risk in the survival, development of eggs after thawing is thought to be caused by inappropriate internal regulation of $Ca^{2+}$ and/or formation of intracellular ice crystals. In this experiment, we tested whether the $Ca^{2+}$ current (iCa), a decisive factor to $Ca^{2+}$ entry, was altered in post-thawed oocytes by using whole cell voltage clamp technique. The quality and survival rates of the oocytes derived from both fresh and frozen groups were examined by morphology and FDA-test. Vitrified oocytes (VOs) were incubated for 4 hr after thawing and then donated to this experiment. Ethyleneglycol-ficoll-galactose (EFG) was used as a cryoprotectant for vitrification. The membrane potential was held at -80 mV and step depolarizations of 250 ms were applied from -50 mV to 50 mV in 10 mV increments. The survival rates showed a higher in VOs vitrified with EFG containing $Ca^{2+}$ than in VOs vitrified with EFG under the $Ca^{2+}$-free condition (82.0% vs 14%). In group with/without $Ca^{2+}$, the survival rates were significantly (P<0.01) difference. In the fresh metaphase II oocytes (FOs), current-voltage (I-V) relationship showed that iCa began to activate at -40 mV and reached its maximum at -10 mV. With same voltage pulses, inward currents were elicited in VOs. I-V relationships observed in VOs were similar to those in FOs. Time constants of activation and inactivation of the inward current shown in VOs were not different to those in FOs. This accordance in I-V relations and time constants in FOs with those in VOs indicates that the inward currents in FOs are unaltered by vitrification and thawing. Therefore, vitrification with EFG does not play as a factor to deteriorate $Ca^{2+}$ entry across the membrane of the oocytes.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.1
• /
• pp.121-127
• /
• 2013

With the continuing demand for lightweight bicycles, carbon fiber composite materials have been widely used in manufacturing bicycle frames and components. Unlike general isotropic materials, the structural characteristics of composite materials are strongly influenced by the staking directions and sequences of composite laminates. Thus, to verify the design process of bicycles manufactured using composites, structural analysis is considered essential. In this study, a carbon-fiber-reinforced plastic (CFRP) bicycle frame was designed and its structural behavior was investigated using finite element analysis (FEA). By measuring the failure indices of the fiber and matrix under various stacking sequences and loading conditions, the effect of the stacking condition of composite laminates on the strength of the bicycle structure was examined. In addition, the structural safety of the bicycle frame can be enhanced by reinforcing weak regions prone to failure using additional composite laminates.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.5 no.3
• /
• pp.191-195
• /
• 1985

This field experiment was undertaken to assess the effects of three levels of inclination ($10^{\circ},\;20^{\circ},\;and\;30^{\circ}$) and four rates of $N-P_2O_2-K_2O$ (O-O-O, 14-10-20, 28-25-25, and 42-40-40kg/10a) on establishment, forage yield and quality and botanical composition of new established mixed grass-clover sward. This first part is concerned with the forage yield, yield component and botanical composition. The results obtained after a two-year experiment are summarized as follows: 1. Dry matter yields of mixed grass-clover sward were greatly decreased by increasing the inclination grade of hilly pasture, whereas it of weeds was not significantly influenced. Comparing with weeds, the establishment of introduced pastures was relatively low with increasing the grade of inclination. 2. By increasing the NPK rate, the yields of grasses and mixed forages and the rate of introduced pastures were greatly increased at all grades of inclination, whereas the change in the weed yield was not significant. 3. There were the differenced in the forage yield and yield component, and efficiency of fertilizers by the grade of inclination, which indicated the necessity of different management on the selection of suitable grass species, seeding rate, amount of fertilizer application, and the methods of grassland establishment, management and utilization.

• Korean journal of food and cookery science
• /
• v.22 no.5 s.95
• /
• pp.666-680
• /
• 2006

To obtain basic data for the utilization of saltwort (Salicornia herbacea L.) as a functional ingredient in steamed foam cake, the optimum component ratios for major raw ingredients (saltwort, salt, and wheat flour) as independent variables that affect the product quality were scientifically determined using RSM (response surface methodology) technique. A three-factor and five-level rotational central composite design was used for treatment arrangement. The complete design consisted of 16 experimental points. The three independent variables selected for the RSM experiment were amounts of saltwort (X$_1$, 5${\sim}$25 g), salt (X$_2$, 0${\sim}$10 g), and wheat flour (X$_3$, 470${\sim}$530 g). The optimum responses in specific gravity of the batter and volume, color, texture, and sensory evaluation result of the cake were obtained. The specific gravity and viscosity of the batter at p<0.01 was verified from the regression curve. The characteristic of the batter was influenced by all independent variables, but was extremely dependent on the amount of saltwort ordinary points of the surface responses from the batter formed the minimum points for specific gravities of the batter while viscosities of the batter appeared with the saddle points. Analysis of the response indicated that the amount of saltwort was the most influential factor over the physical properties of the cake, among the dependent variables. Ordinary points of the surface responses from the cake formed the maximum points for loaf volume, hardness gumminess, and chewiness, while Hunter colorimetric parameters appeared with the saddle points. The result indicated that level of the saltwort deviating more or less from the optimal amount decreased the volume and increased the specific gravity with less tender product. Ordinary points of the surface responses of the sensory evaluation scores from the cake formed the maximum points for appearance, flavor, softness, and overall acceptability, while color values appeared with the saddle points. The result also indicated that the level of the saltwort deviating more or less from the optimal amount reduced the preference for the product. Integration of the optimum responses common to all dependent variables that overlapped all the contour maps finally indicated that the combination of 8.3${\sim}$13.8 g saltwort, 2.5${\sim}$6.6 g salt, and 486.5${\sim}$511.5 g wheat flour under the selected preparation recipe optimized the physical and sensory properties in the teamed foam cakes. Practical preparation of the product with median amounts of the ingredients, i.e., 11.0 g saltwort, 4.6 g salt, and 499.0 g wheat flour resulted in similar qualities to the predicted responses. In conclusion, these study results indicated that preparation of steamed foam cake with added saltwort ingredient could potentially produce a more nutritious product with less salt. Further research is required to acquire the optimum levels for sub-ingredients to improve the product quality.

• Resources Recycling
• /
• v.13 no.4
• /
• pp.23-31
• /
• 2004

Basic studies have been conducted regarding the attempt of the utilization of waste Undaria pinnatifida as an adsorbent for the adsorption treatment of lead-containing wastewater. Undaria pinnatifida was found to be chiefly composed of hyo-carbonaceous compounds and have a fairly high specific surface area, which suggesting the possibility of its application as a Potential adsorbent. The electrokinetic Potential of Undaria pinnatifida particles was observed to be negatively highest at around pH 8 and the fact that its electrokinetic potentials are negative at the whole pH range supported it might be an efficient adsorbent especially for cationic adsorbates. Under the experimental conditions, $Pb^{2+}$ was found to mostly adsorb onto Undaria pinnatifida within a few minutes and reach the equilibrium in adsorption within ca. 30 minutes. The adsorption of $Pb^{2+}$ was exothermic and explained well by e Freundlich model. Acidic pretreatment of Undaria pinnatifida enhanced its adsorption capacity for $Pb^{2+}$ , however, the reverse was observed for alkaline pretreatment. The formation of organometallic complex between $Pb^{2+}$ and some functional groups on the surface of Undaria pinnatifida was considered to be one of the main drives for adsorption. Finally the adsorbability of$ Pb^{2+}$ was examined to be rather affected by several solution features such as the coexistence of other adsorbate, the variation of ionic strength, and the concentration of complexing agent.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.6
• /
• pp.888-895
• /
• 2015

For effective utilization of butter clam shell as a natural calcium resource, the optimal conditions for preparation of calcium acetate (BCCA) with high solubility were determined using response surface methodology (RSM). The polynomial models developed by RSM for pH, solubility, and yield were highly effective in describing the relationships between factors (P<0.05). Increased molar ratio of calcined powder (BCCP) from butter clam shell led to reduction of solubility, yield, color values, and overall quality. Critical values of multiple response optimization to independent variables were 2.70 M and 1.05 M for acetic acid and BCCP, respectively. The actual values (pH 7.04, 93.0% for solubility and 267.5% for yield) under optimization conditions were similar to predicted values. White indices of BCCAs were in the range of 89.7~93.3. Therefore, color value was improved by calcination and organic acid treatment. Buffering capacity of BCCAs was strong at pH 4.88 to 4.92 upon addition of ~2 mL of 1 N HCl. Calcium content and solubility of BCCAs were 20.7~22.8 g/100 g and 97.2~99.6%, respectively. The patterns of fourier transform infrared spectrometer and X-ray diffractometer analyses from BCCA were identified as calcium acetate monohydrate, and microstructure by field emission scanning electron microscope showed an irregular form.