• Human Ecology Research
• /
• 제52권1호
• /
• pp.55-62
• /
• 2014

The purpose of this study is to identify changes in the sleeve patterns of women's jackets from the end of the 19th century to the early 20th century. To meet this purpose, we analyzed nine sets of historic sleeve patterns. The experimental sleeve patterns were selected from the English costume source books that provided women's costume patterns from the 1890s and 1900s. These experimental sleeve patterns were drafted on the basis of the directions given in the source books. The sleeve lengths, widths, and angles of each sleeve pattern were measured. The results of this study showed that the silhouette of the two-piece sleeves of women's jackets in the 1890s had a tight fit; further, they had a sharper elbow curve than that of 1900s' sleeves. The sleeves of the 1890s' women's jackets were 6-11 cm shorter or narrower than the sleeves of the 1900s' jackets. The under-sleeve inseam angle of the 1890s' sleeve was greater than that of the 1900s' sleeve. The outseam angle of the upper sleeve was greater than the under-sleeve angle of the 1900s' sleeve pattern. The elbow curve of the women's jacket sleeve pattern appeared to be a sluggish silhouette. This change happened as the outseam angle of the under sleeve was reduced. This shows that the elbow curve silhouette of the women's jacket sleeves of the 1890s and 1900s has controlled the change in the under-sleeve outseam angle.

• 복식문화연구
• /
• 제9권5호
• /
• pp.700-711
• /
• 2001

The purpose of this study was to investigate the differences in the method of patternmaking, difficult in draft of patternmaking, fit in sleeve, aesthetic view, fashionableness in the five types of two-piece sleeve under the controled situation. Five types of two piece sleeve that were originated from five countries including domestic companies which called A type, B type, C type, D type, and E type were used. In order to conduct the experiment fur the study, 10 persons who were well organized about the patternmaking drafted 5 types of sleeve and were tested for the differences in the method of patternmaking, difficulty in draft of patternmaking. Another panel were tested for fit in sleeve, aesthetic view, fashionableness in the five types of two-piece sleeve in jacket under the controled situation. The results of this study were as followed 1. C type was needed height of armhole in bodice and D type was needed height of armhole and width of armhole in bodice as well as all parts of sleeve measurements to draft patternmaking. 2. There were significant differences of the items such as cap height, ease amount around sleeve cap, width of sleeve, forwardness of sleeve and the length of elbow line of the five types patternmaking drafted. 3. There were significant differences of difficulty in draft of the five types of patternmaking. C type and E type were easier to draft. 4. There were significant differences in fitness of the sleeves in jacket. C type and E type were more fit. 5. There were significant differences in aesthetic view. A type, B type and E type were more aesthetic under the situation. 6. There were significant differences in fashionableness in jackets. A type and E type were more fashionable under the situation.

• 대한가정학회지
• /
• 제44권9호
• /
• pp.31-39
• /
• 2006

This study was conducted to reproduce the two-piece sleeve pattern of the ladies' jacket of the 1890's for Korean women of the twenties who have the standard body type and the average size. Fourteen two-piece sleeve patterns of the ladies 'jacket of the 1890's were collected and drawn to actual size. The length and width proportion of the upper-sleeve and under-sleeve pattern of the ladies' jacket of the 1890's were similar to the two-piece sleeve pattern of jacket which we see now. The elbow line of the two-piece sleeve pattern of the ladies' jacket of the 1890's was lower than the two-piece sleeve of jacket of today. The cap of the sleeve of the ladies' jacket of the 1890's was gathered and this gave volume to the upper part of sleeve but the lower part of the sleeve was tight. The study pattern of two-piece sleeve pattern which had the characteristics of the sleeve pattern of the ladies' jacket of the 1890's was designed like for Korean women of the twenties who have the standard body type and the average size through modifications based on the evaluation of dressing on two occasions. The study pattern was evaluated to have the silhouette of the sleeve of the ladies' jacket of the 1890's and to fit Korean women of the twenties who have the standard body type and the average size with the sensory test.

• The Journal of Korean Physical Therapy
• /
• 제26권3호
• /
• pp.147-155
• /
• 2014

Purpose: This study was to determine the effects of before and after application of silicone sleeve on balance and muscle strength in anterior cruciate ligament (ACL) reconstruction patients. Methods: 13 subjects who had one or more months after ACL surgery were involved. Dynamic balance, timed up and go (TUG), stair step, vertical jump, proprioception and isokinetic knee strength were measured while subjects under taped, untapped and silicone sleeve conditions. Results: For 30 seconds one-leg standing, there was a significant improvement under silicone sleeve on operated side with eyes open and both taping and silicone sleeve revealed similar effects with eyes closed (p<0.01). Application of silicone sleeve showed significant effects in proprioceptive function on the operated side compared to both taping and none (p<0.05). For stair step test, TUG and vertical jump was a tendency to improve after application of silicone sleeve, but no significant different. Muscle strength on operated side of quadriceps and hamstring was significantly improved compared with none or taping(p<0.05). Conclusion: Silicone sleeve application for ACL reconstruction patients was effective immediately on improving strength and balance. Therefore, depending on the intended use and the disease is considered appropriate use of silicone sleeve will be able to help prevention and functional movement.

• 대한가정학회지
• /
• 제24권2호
• /
• pp.1-11
• /
• 1986

The subject, in the blouses that sleeve caps and sleeve lengthes are different from, did sensory test by right arm movement and both arms movement. This sensory test which is used in fabric good, is Shef's. RESULTS : 1) The ease of bust size is very significant by cap height, at 5%, 1% level by sleeve length. 2) The front area of arm hole is affected by cap height, sleeve length movements more than the back and the under area of arm hole are 3) Sleeve width is affected by cap height, sleeve length both arms movement. That is, they should be designed according to the use because they affect the ease of blouse very much. Especially bust size should be considered with sleeve pattern because the ease bust becomes different with sleeve pattern.

• 복식문화연구
• /
• 제9권1호
• /
• pp.33-43
• /
• 2001

In this study, both kinds of materials, that is, leather and woolen fabrics, which have similar thickness, have been adopted. To determine proper length of ease, not only sleeve cap height but also sleeve width has been adjusted mainly based on 5cm length of the ease, which follows maximum sleeve cap height, and then different length of ease, for example, 4cm, 3cm, 2cm and 1cm of ease, have been made. As a result, eighteen kinds in total of sleeves have been made: In other words, each nine kinds of both leather and woolen fabrics have different ease lengths. In addition, each sleeve has been inspected visually and functionally. Following conclusion has been gotten based on outcome of the study: 1. Proper ease length for manufacture of leather garment is said to be 1∼2 cm. As a result, ease length with higher sleeve cap height shall be 1∼2cm, while the length with lower sleeve cap height shall be 1cm or less. 2. Wider sleeve width has better function. Considering relations with sleeve cap height, sleeve width shall exceed +4cm of bicep line. 3. to satisfy a variety of those conditions while manufacturing leather garment, sleeve cap height, which is used for the manufacture of full dress and street wear garment, To lessen the ease length, body A.H shall be relatively loose under the arms, or pad shall be supplemented on the shoulder, so that the difference had better be lessened to solve such problems.

• 한국의상디자인학회지
• /
• 제10권2호
• /
• pp.105-115
• /
• 2008

Men's outer wear, such as jackets and coats appeared since the 16th century. They have been changed from doublets, coats, justaucorps, tail-coats, frock coats and morning coats to contemporary men's suits. Since the early 17th century, sleeve patterns of men's outer jackets had been mostly two-pieces close fitted patterns. The purpose of this article is to compare sleeve patterns of various jackets, which appear in various historic costume books. Armhole measurements, sleeve head measurements, amounts of ease, armhole depths, armhole widths, crown heights, sleeve width and sleeve angle had been compared to find out the differences among patterns of different times and styles. Coming to the present, the difference between top sleeve and under sleeve became more obvious, and the sleeve angle became less curvy. Another interesting point is that there had been considerable amounts of ease, which is the difference between sleeve head measurements and corresponding armhole measurements. It is because the sleeve has been attached to the armhole not by seam but by string. It is believed that the present sleeves have more natural curve and shape compared to the past.

• 대한기계학회논문집
• /
• 제13권4호
• /
• pp.697-702
• /
• 1989

본 연구에서는 도체의 접속 금구류의 도전 열특성을 규명하기 위한 연구의 일환으로 접속 금구류 중 접속 슬리브커넥터의 적절한 허용 전류, 통전시에 발생하는 승온 특성 및 전기 저항 특성 등을 실험적으로 구하고 접속 금구류의 설계에 필요한 도전 열특성을 실험적으로 규명하는 것을 목적으로 한다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제16권4호
• /
• pp.79-88
• /
• 2012

본 연구에서는 고강도 모르타르 충전식 기계적 슬리브 철근이음에 대한 단조가력 하에서의 강성을 보다 적절하게 평가하기 위하여, 슬리브 철근이음의 주요한 구조요소가 미치는 단조가력 하에서의 철근이음 강성에 대한 영향을 검토하였고 AIJ 규준에서 설정한 단조가력 하에서의 슬리브 철근이음에 대한 강성 기준과 비교평가하였다. 이것을 위하여 단조가력을 실시한 국내외 189여개 고강도 모르타르 충전식 기계적 슬리브 철근이음의 실험데이터를 조사하고 그 실험결과를 분석하였다. 그 결과, AIJ 규준에서 규정하는 목표 강성을 확보하는데 필요한 $f_g$(L/d)의 한계값을 철근의 종류와 슬리브의 종류에 따라서 각각 제시하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제17권1호
• /
• pp.85-93
• /
• 2013

본 논문에서는 반복하중이 작용하는 고강도 모르타르 충전식 슬리브 철근이음의 강성에 대한 합리적인 검토를 하기 위하여 100여개 고강도 모르타르 충전식 슬리브 철근이음의 실험데이터를 이용하여 슬리브 철근이음이 보유하고 있는 구조인자가 반복 하중이 작용하는 슬리브 철근이음의 강성에 미치는 효과를 파악하였고, AIJ 규준에 정해져 있는 강성 등급을 충족시키는 최소한 의 조건에 대하여 평가한 결과, SD350과 SD400 철근을 매입한 모르타르 충전식 주물 슬리브 철근이음에서 $f_{g^*}$(L/d)가 470MPa 이상이 된다면 AIJ 규준의 SA급 강성, $f_{g^*}$(L/d)가 340MPa 이상이 된다면 AIJ 규준의 A급 강성을 최종파괴형식과 슬리브 형상에 상관없이 확보할 수 있는 것으로 나타났다. 또한 SD500 철근을 매입한 모르타르 충전식 슬리브 철근이음에서 주물슬리브와 강관 슬리브를 사용한 경우는 $f_{g^*}$(L/d)가 400MPa 이상이 된다면 AIJ 규준의 A급 강성을 확보할 수 있는 것으로 나타났다.