• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.1
• /
• pp.100-108
• /
• 2015

The purpose of this study is to evaluate the effect of improvement on the impact resistance and strength properties of cement composites by surface modification of aramid fiber. For aramid fiber reinforced cement composites, therefore, dispersion capability and the bonding efficiency between the fibers and the cement composite material need to be improved. It is possible by modifying surface properties to hydrophobic, it is considered that oiling agent ratio of 1.2 % and improvement of performance is in need to be investigated. In this study, short aramid fibers were mixed by different fiber length and oiling agent ratio. And improvement of strength properties and impact resistance performance of hybrid cement composites were evaluated under the influence of steel fiber. As a result, strength properties of aramid fiber reinforced cement composites are different by mixing ratio of fiber, oiling agent ratio and length of fiber. In case of cement composites which have same volume fraction and fiber length, tensile strength and flexural strength were improved with increase of the emulsions throughput of the fiber surface. The results of evaluation on the static strength properties had effects on impact resistance performance by high-velocity impact. And it was observed that the scabbing of rear was suppressed with increase of the oiling agent ratio.

• Journal of the Korean Electrochemical Society
• /
• v.6 no.1
• /
• pp.6-12
• /
• 2003

Plasma carbon black(PB) which prepared by plasma pyrolysis of methane was treated at 800, 1300 and $2100^{\circ}C$ under $2\times10^{-2}$ torr. Four different samples including raw PB were added to $LiCoO_2$, cathode active material of lithium secondary battery, to investigate effects of properties of plasma black as conductors on electrochemical characteristics. Based on our experimental results, PB conductors with low amount of surface functional groups and high electrical conductivity enhanced the cyclability and the initial discharge capacity. However, deterioration of rate capability and cyclability were observed (or the plasma black treated at $2100^{\circ}C$ For the plasma black conductor prepared from plasma pyrolysis, the effects of properties of carbon black on electrochemical characteristics were combined results of changes in electrical conductivity and structural properties such as agglomeration of plasma black. The conductivity of plasma black increased with treatment temperature, while dispersion of plasma black decreased. As a result, the high cyclability of cell was observed at $800^{\circ}C$ of heat treatment temperature.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.12
• /
• pp.689-695
• /
• 2015

A biofilm filtration for the removal of gaseous pollutants has been recognized as a process with a complex interaction between the gas flow characteristics and the process operating variables. This study aims to develop an one dimensional dynamic numerical model which can be utilized as a tool for the analysis of biofilm filtration process operated in plug flow mode. Since, in a plug flow system, minor environmental changes in a gaseous unit process cause a drastic change in reaction and the interaction between the pollutants is an influencing factor, plug flow system was generalized in developing the model. For facilitation of the model development, dispersion was simplified based on the principles of material balance. Several reactions such as competition, escalation, and control between the pollutants were included in the model. The applicability of the developed model was evaluated by taking the calibration and verification steps on the experimental data performed for the removal of BTX at both low and high flow concentration. The model demonstrated a correlation coefficient ($R^2$) greater than 0.79 under all the experimental conditions except for the case of toluene at high flow condition, which suggested that this model could be used for the generalized gaseous biofilm plug flow filtration system. In addition, this model could be a useful tool in analyzing the design parameters and evaluating process efficiency of the experiments with substantial amount of complexity and diversity.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.10B
• /
• pp.936-944
• /
• 2006

In order to enhance their own customer satisfaction index that is one of the top level managerial performance indices, Internet communication service providers endeavor onto establishing a total quality management system. Specifically, it is under discussion that some critical Internet communication network quality characteristics closely related to customer satisfaction index should be controlled aiming to this managerial goal. This paper presents an application scheme of I-MR control charts for monitoring Internet communication network quality characteristics. This statistical quality control scheme generates a signal to practitioners when it detects the network quality characteristics out-of control. It is designed based on; 1) individual measurements; and 2) moving ranges between two consecutive individual measurements collected with a constant time interval. Empirical analyses are illustrated to estimate the expected quality improvement ratios that can be realized with the application scheme proposed in this paper. Assuming that the assignable causes can be revealed and eradicated, regarding two Internet communication services A, B, seven network quality characteristics for each service, eleven distinct measuring spots for each network quality characteristic, the expected quality improvement ratios are calculated with which the effect of the application scheme is evaluated. Results show the ranges of the expected quality improvement ratios; 1) Service A, (1) mean (0.31%-11.44%), (2) standard deviation (9.82%-71.10%): 2) Service B, (1) mean (0.29%-17.64%), (2) standard deviation (8.05%-60.59%). Hence, It is anticipated that the I-MR control charts based application scheme can be effective not only to improving the mean and dispersion of the network quality characteristics concerned but also to maintaining the network quality characteristics in-control consequently.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.33 no.1
• /
• pp.39-44
• /
• 2013

In Korea, wide spread use of whole cottonseed, which is primarily a GMO plant imported from foreign countries and being fed to animals as raw state, has aroused concern that it may disturb the existing ecology of the country unless dispersion of the seed is under proper control. The objective of this study was to elucidate the changes in various nutritive parameters due to heat treatment and to determine the effective condition for removing germination ability of whole cottonseed (WCS). Of the various temperatures applied (76, 78, 80, 85, $100^{\circ}C$/30 min) $85^{\circ}C$ for 30 min was confirmed to be the lowest temperature treatment which resulted in a complete removal of the germination ability of WCS. Therefore, based on the determined temperature condition ($85^{\circ}C$ 30 min) we tried to examine the changes of various nutritional parameters, including nutrient composition, in vitro digestibilities and ruminal protein degradabilities, comparing raw whole cotton seed (RWCS) and heated whole cotton seed (HWCS). Some changes in amino acid composition were observed with heat treatment of WCS, but these were regarded to originate from the variation in plant quality and seed morphology, which are usually affected by different environmental factors during the vegetation period. As for fatty acid composition, no significant differences were observed to occur during heat treatment. However, WCS heated at $85^{\circ}C$ for 30 min in a circulating oven showed a significant decrease (p<0.05) of in situ rumen degradability in both dry matter (DM) and crude protein (CP), as compared to raw WCS. Overall results obtained in the study indicate that the heating condition used in this study, which was proven to be the most appropriate and economic to remove germination ability of WCS, may also improve the nutritional value of the ruminant with regard to reducing its protein degradability within the rumen.

• Polymer(Korea)
• /
• v.35 no.5
• /
• pp.472-477
• /
• 2011

To study the effects of the acid group of functionalized MWNT (multiwalled carbon nanotube) on the thermal and mechanical properties of polyacrylonitrile(PAN) nanofibers, acid ($H_2SO_4/HNO_3$) treated MWNT (O-MWNT) were further functionalized by diazonium salt reaction with 5-aminoisophthalic acid (IPA). Compared to O-MWNT, IPA-MWNT with isophthalic acid group showed a better dispersion stability in polar solvents and IPA-MWNT/PAN composite film displayed lower heat of reaction (${\Delta}H$) than that of homo PAN when stabilized under air atmosphere. The continuous electrospun fibers were prepared using a conductive water bath. PAN fibers containing 1 wt% of IPA-MWNT showed an increase of tensile strength by 100% and tensile modulus by 240% compared to the PAN fibers without IPA-MWNT.

• Journal of the Korean Magnetics Society
• /
• v.25 no.1
• /
• pp.10-15
• /
• 2015

The model for the magneto-impedance of composite wires composed of highly conductive nonmagnetic metal core and soft magnetic shell was derived based on the Maxwell's equations. The Cu($100{\mu}m$ diameter)/$Ni_{80}Fe_{20}$($15{\mu}m$ thickness) core/shell composite wire was fabricated by electrodeposition. The impedance spectra for the $Cu/Ni_{80}Fe_{20}$ core/shell composite wire were measured in the frequency range of 10 kHz~10 MHz under longitudinal dc magnetic field in 0 Oe~200 Oe. The spectra of complex permeability in circumferential direction were extracted from the impedance spectra by using the derived model. The extracted spectra of complex permeability showed relaxation-type dispersion which is well curve-fitted with Debye equation with single relaxation frequency. By analyzing the magnetic field dependence of the complex permeability spectra, it has been verified that the composite wire has magnetic anisotropy in longitudinal direction and the origin of the single relaxation process is the magnetization rotation in circumferential direction.

• Korean Journal of Weed Science
• /
• v.30 no.2
• /
• pp.68-83
• /
• 2010

Weedy rice (Oryza sativa L.) occurred sympatrically with other weeds and the rice crop in Malaysian rice granaries. We conducted field surveys in 2006-2008 seasons in 7 farm blocks of Selangor's North West Project, Malaysia to enlist the new biotypes of weedy rice (NBWR) and assess their spatio-temporal pattern of distribution based on quantitative and dispersion indices. No less than 16 accessions of NBWR were identified based on their special traits, viz. panicle type, pericarp colour, presence or absence of awn, seed type and degree of grain shattering. The NBWR accessions exhibited a combination of morphological traits from open panicle, grain with awns, red pericarp, short grain type, and degrees of grain shattering. Others mimic commercial rices with close panicle, awnless grains, white pericarp, long or short grain-type. Invariably, the NBWRs mimic and stand as tall as cultivated rice namely MR219, MR220, or MR235 and these NBWR accessions stand among equals morphologically vis-a-vis the commercial rice varieties. Most accessions displayed varying degrees of grain shattering in excess of 50%, except Acc9 and Acc12. The seasonal dynamics of on the prevalence of dominant NBWR accessions were also displaying significant differences among farm blocks. While Bagan Terap farm block, for example, did not record any measurable changes in the dominant NBWR accessions over seasons, the Sungai Leman farm block recorded measurable season-mediated changes in the dominant NBWR accessions. Sungai Leman started with NBWR Acc3, Acc4, Acc5, Acc7, Acc8, and Acc12 in season 1 of 2006/2007, but no measurable records of Acc3 and Acc5 were shown in season 2 of 2007. In season 3 of 2007/2008, only Acc8 and Acc12 prevailed in the farm block. In Sawah Sempadan farm block, season 3 of 2007/2008 showed much reduced prevalence of NBWRs leaving only Acc8 and Acc12. Most accessions registered clump or under-dispersed spatial distribution pattern based on quantitative indices: variance-to-mean ratio (VMR) and Lloyd's patchiness values. The dynamics on the extent of infestation and prevalence of dominant NBWR accessions registered both season- and farm-block mediated differences. Most accessions showed VMR >1 thus indicative of having a clump or clustered spatial distribution, as exemplified by Acc3, Acc4, Acc7, Acc8 and Acc12 in all farm blocks throughout three seasons. Some accessions have either random or uniform distribution in a few farm blocks. The Acc8 has the highest population counts based on important value index, followed by Acc12, and both were the most dominant accession while Sawah Sempadan was the worst farm block infested by NBWR compared to other farm blocks. These results were discussed in relation with the current agronomic and weed management practices, water availability and extension services in the granary.

• Journal of Radiation Protection and Research
• /
• v.40 no.4
• /
• pp.244-251
• /
• 2015

The containment filtered venting system reduces the range of the contamination area around the nuclear power plant by strengthening the integrity of the containment building. In this study, the probabilistic assessment code MACCS2 was used to assess the effect of the CFVS to off-site. The accident source term was selected from a Probabilistic Safety Analysis report of SHINKORI 1&2 Nuclear Power Plant. The three source term categories from 19 STC were chosen to evaluate the effective dose and thyroid dose of residents around the power plant and the dose with CFVS and without CFVS were compared. The dose was calculated according to the distance from the nuclear power plant, so the damage scale based on the distance that exceeds the IAEA criteria for effective dose (100 mSv per 7 days) and thyroid dose (50 mSv per 7 days) were compared. The effective dose reduction rates of the STC-3, STC-4, STC-6 were about 95-99% in the whole range (0~35 km), 96-98% for the thyroid dose. There are similar results between effective dose and thyroid dose. After applying the CFVS, the damage scale that exceeds the effective dose criteria was about 1 km (mean). Especially, the STC-4 damage scale was decreased from 26 km (mean) to 1.2 km (mean) significantly. The damage scale that exceed the thyroid dose criteria was decreased to 2~3 km (mean). The STC-4 damage scale was also decreased significantly as compared to STC-3, STC-6 in terms of effective dose.

• Korean Chemical Engineering Research
• /
• v.51 no.5
• /
• pp.622-627
• /
• 2013

Colloidal silica is used in various industrial products such as chemical mechanical polishing slurry for planarization of silicon and sapphire wafer, organic-inorganic hybrid coatings, binder of investment casting, etc. An accurate determination of particle size and dispersion stability of silica sol is demanded because it has a strong influence on surface of wafer, film of coatings or bulks having mechanical, chemical and optical properties. The study herein is discussed on the effect of measurement results of average particle size, sol viscosity and electrophoretic mobility of particle according to the volume fraction of eight types of silica sol with different size and surface properties of silica particles which are presented by the manufacturer. The measured particle size and the mobility of these sol were changed by volume fraction or particle size due to highly active surface of silica particle and change of concentration of counter ion by dilution of silica sol. While in case the measured sizes of small particles less than 60 nm are increased with increasing volume fraction, the measured sizes of larger particles than 60 nm are slightly decreased. The mobility of small particle such as 12 nm are decreased with increase of viscosity. However, the mobility of 100 nm particles under 0.048 volume fraction are increased with increasing volume fraction and then decreased over higher volume fraction.