• Polymer(Korea)
• /
• v.38 no.3
• /
• pp.320-326
• /
• 2014

The effects of high shear rate processing on the thermal properties of PC/ABS blends were studied. It was executed by the high shear processing machine (NHSS2-28) at the varied conditions of screw speeds and loaded duration. After the samples were processed with NHSS2-28, the $T_gs$ were shifted from 143 to $133^{\circ}C$, and the behavior of degradation determined by TGA showed two distinct steps before high shear rate processing, while it showed a straight line after the processing. In order to provide the reasons of the properties, it was showen by SEM and UTM that the droplet sizes morphologically decreased after the processing, and the elongations decreased slightly until 1000 rpm of screw speed and then sharply decreased, according to the conditions of high shear rate processing. Therefore, it can be confirmed that $T_g,s$ of PC/ABS blends were considerably shifted under an appropriate high shear rate condition, and rapidly dropped, so that blends degraded above the condition, due to stress-induced degradation.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.6
• /
• pp.359-366
• /
• 2019

Experimental and analytical studies on the behavioral characteristics of a pre-stressed (PS) steel girder are conducted to investigate the effects of deviators on the non-linear inelastic properties of the PS system. In this regard, 4 test specimens consisting of a steel H-beam, a straight cable with eccentricity, anchorages, and deviators are built and failure tests are performed under two-point loading. In addition, in-plane elastic deformation theories for the PS system without a deviator, and with three deviators at regular intervals are analytically formulated and solved using a symbolic calculation technique. To verify the validity of the experimental and the proposed analytical theories, the results obtained using FEM models composed of beam elements, rigid beam elements, and truss cable elements, are compared to the experimental results and the analytical solutions. As a result, it is determined that externally installed un-bonded deviators inhibit flexural deformation of the deformed beam to such an extent that their elastic stiffness, and failure strength are significantly improved compared to those of the PS system without deviators.

• Korean Journal of Occupational Health Nursing
• /
• v.14 no.1
• /
• pp.56-70
• /
• 2005

Objectives: The purpose of this study is to develop a linking model between industrial injury insurance organs and local organizations providing social welfare health services, for the activation of medical rehabilitation services for industrial injury patients. Method: Research design for this study was a multi-step research through literature review, field research, and group interviews with persons in charge, to compare local society-oriented medical rehabilitation programs. The term of researches Sep.1 ~ Nov. 30, 2004. Results: 1. Home nurses from Workers Accident Medical Corporation have been taken to be adequate to case managers, who link industrial accident insurance institutions to local society services for the activation of medical rehabilitation services for industrial injury patients. They have been chosen for case managers because they have richer understanding and experiences of objects of industrial accidents than any other specialists, and because they have proved to be able to provide direct home services as a specialist. We have established the center for case management affairs within the workers accident general hospital, organized the committee for case management with doctors in charge, doctors in rehabilitation, rehabilitation consultants, social welfare workers, physical therapists, and nurses, determined objects of case managements from those of long-term recuperation, and constructed a course of case management containing from case management plans to evaluation. 2. We have made files of community resources, and organized the council of industrial accident administration to have it in charge of the adjustment and linking of services in case management affairs. 3. Because there are inequality of community resources between areas, differences in experiences in and bases for linking, and disparity of core organizations with active linking in the system of linking between public and civil sectors, we have taken a system of linking between parallel organs to be the core. In our linking model, workers accident general hospital, hospitals designated for industrial injury, and rehabilitation hospitals are linked in parallel, inadequate long-term recuperation managers are trusted to an workers accident medical corporations through examination by the examination committee in Korea Labor Welfare Corporation, and are dealt with by the committee for case management. Of the hospitals designated for industrial accidents, those running a home caring center provide home caring services for the handicapped at home from industrial injury. 4. Workers Accident Medical Corporation take part in medical rehabilitation, and Korea Labor Welfare Corporation in vocational/social rehabilitation. Furthermore, in the model, the latter should construct a system for job opportunities through Internet portals and provide cyber vocational consultation and introduction. Conclusion: Improvement of systems is needed to apply the linking model to practical affairs. Because this model is centered for practical affairs, it should be put under the analysis of effects, and evaluation of its adequacy to practical application, and its effects and efficiency through experimental running in the 8 workers accident general hospital in Korea.

• Journal of the Korean Vacuum Society
• /
• v.17 no.4
• /
• pp.311-316
• /
• 2008

Since the presence of the chemical impurities and defect at surfaces and interfaces greatly influence the properties of various semiconductor devices, an unambiguous chemical characterization of the metal and semiconductor surfaces become more important in the view of the miniaturization of the devices toward nano scale. Among the various conventional surface characterization tools, Electron-induced Auger Electron Spectroscopy (EAES), X-ray Photoelectron Spectroscopy (XPS) and Secondary Electron Ion Mass Spectroscopy (SIMS) are being used for the identification of the surface chemical impurities. Recently, a novel surface characterizaion technique, Positron-annihilation induced Auger Electron Spectroscopy (PAES) is introduced to provide a unique method for the analysis of the elemental composition of the top-most atomic layer. In PAES, monoenergetic positron of a few eV are implanted to the surface under study and these positrons become thermalized near the surface. A fraction of the thermalized positron trapped at the surface state annihilate with the neighboring core-level electrons, creating core-hole excitations, which initiate the Auger process with the emission of Auger electrons almost simultaneously with the emission of annihilating gamma-rays. The energy of electrons is generally determined by employing ExB energy selector, which shows a poor resolution of $6{\sim}10eV$. In this paper, time-of-flight system is employed to measure the electrons energy with an enhanced energy resolution. The experimental result is compared with simulation results in the case of both linear (with retarding tube) and reflected TOF systems.

• Journal of the Korean Geotechnical Society
• /
• v.32 no.9
• /
• pp.51-62
• /
• 2016

Parametric studies for various site conditions by using 3d numerical model were carried out in order to estimate dynamic behavior of soil-pile-structure system in dry soil deposits. Proposed model was analyzed in time domain using FLAC3D which is commercial finite difference code to properly simulate nonlinear response of soil under strong earthquake. Mohr-Coulomb criterion was adopted as soil constitutive model. Soil nonlinearity was considered by adopting the hysteretic damping model, and an interface model which can simulate separation and slip between soil and pile was adopted. Simplified continuum modeling was used as boundary condition to reduce analysis time. Also, initial shear modulus and yield depth were appropriately determined for accurate simulation of system's nonlinear behavior. Parametric study was performed by varying weight of superstructure, pile length, pile head fixity, soil relative density with proposed numerical model. From the results of parametric study, it is identified that inertial force induced by superstructure is dominant on dynamic behavior of soil-pile-structure system and effect of kinematic force induced by soil movement was relatively small. Difference in dynamic behavior according to the pile length and pile head fixity was also numerically investigated.

• Resources Recycling
• /
• v.5 no.3
• /
• pp.56-64
• /
• 1996

C,H,OH system is widely used for producing synthetic beverages and pharmaceuticals. Calcium hydroxide suspension was used to callhol the morphology of calcium carbonate, and the charactenstics of the formahan and crystsllizatian of calcium cilrbonate by adding ethylenc glycol were determined A reaclor was made with attaching a ceramic bubble plate, and lhe eleclrical conductivity was continously monitored during the rcaction with CO, gas. A part of the suspension was separated and powdered at the transition point. XRD and electron microscopic observation showed that the intermedmte and final products were vilterite, ;~r;lganite and calcite. In this study, the volumc of the ethylene glycol added to CH,OH was fixed a1 10 vol\ulcornerh. The valumc of the suspension was 500 ml, and the changes oi characteristics were shdied along with variims cnntents(l0-50 g) of calcium hydroxide. Except m the case of 10 g of calcium hydroxide at the crystallization stagc, all of products showed gelation. Tne marc the calcium hydroxide the shorter the formation time. Alsa. the farmalion of spherical valcrile ivas obsemcd when 30 g Ca(OH), was added. Tne vaterite(a compound material) can bc synthesised under alnbienl pressure and lempcmhre m a C,H,OH system by morphology control. Even though the vateritc was meta-stable phasc and could bc changed to calcitc easily, the stable and spherical vateritc was observed by using G5 glass fillers and vacuum dricrs.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.6 no.2
• /
• pp.155-162
• /
• 2008

Inventories to be disposed of, reference turnup, and source terms for CANDU spent fuel were evaluated for geological disposal system design. The historical and projected inventory by 2040 is expected to be 14,600 MtU under the condition of 30-year lifetime for unit 1 and 40-year lifetime for other units in Wolsong site. As a result of statistical analysis for discharge burnup of the spent fuels generated by 2007, average and stand deviation revealed 6,987 MWD/MtU and 1,167, respectively. From this result, the reference burnup was determined as 8,100 MWD/MtU which covers 84% of spent fuels in total. Source terms such as nuclide concentration for a long-term safety analysis, decay heat, thermo-mechanical analysis, and radiation intenity and spectrum was characterized by using ORIGEN-ARP containing conservativeness in the aspect of decay heat up to several thousand years. The results from this study will be useful for the design of storage and disposal facilities.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.10
• /
• pp.1147-1155
• /
• 2014

Biomechanical models are often used to predict muscle and joint forces in the human body. For estimation of muscle forces, the body and muscle properties have to be known. However, these properties are difficult to measure and differ from person to person. Therefore, it is necessary to predict the change in muscle forces depending on the body and muscle properties. The objective of the present study is to develop a numerical procedure for estimating the muscle forces in the human lower extremity under uncertainty of body and muscle properties during rising motion from a seated position. The human lower extremity is idealized as a multibody system in which eight Hill-type muscle force models are employed. Each model has four degrees of freedom and is constrained in the sagittal plane. The eight muscle forces are determined by minimizing the metabolic energy consumption during the rising motion. Uncertainty analysis is performed using a first-order reliability method. The one-standard-deviation range of agonistic muscle forces is calculated to be about 150-300 N.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.10
• /
• pp.4678-4702
• /
• 2018

Traffic Matrix estimation has always caught attention from researchers for better network management and future planning. With the advent of high traffic loads due to Cloud Computing platforms and Software Defined Networking based tunable routing and traffic management algorithms on the Internet, it is more necessary as ever to be able to predict current and future traffic volumes on the network. For large networks such origin-destination traffic prediction problem takes the form of a large under- constrained and under-determined system of equations with a dynamic measurement matrix. Previously, the researchers had relied on the assumption that the measurement (routing) matrix is stationary due to which the schemes are not suitable for modern software defined networks. In this work, we present our Compressed Sensing with Dynamic Model Estimation (CS-DME) architecture suitable for modern software defined networks. Our main contributions are: (1) we formulate an approach in which measurement matrix in the compressed sensing scheme can be accurately and dynamically estimated through a reformulation of the problem based on traffic demands. (2) We show that the problem formulation using a dynamic measurement matrix based on instantaneous traffic demands may be used instead of a stationary binary routing matrix which is more suitable to modern Software Defined Networks that are constantly evolving in terms of routing by inspection of its Eigen Spectrum using two real world datasets. (3) We also show that linking this compressed measurement matrix dynamically with the measured parameters can lead to acceptable estimation of Origin Destination (OD) Traffic flows with marginally poor results with other state-of-art schemes relying on fixed measurement matrices. (4) Furthermore, using this compressed reformulated problem, a new strategy for selection of vantage points for most efficient traffic matrix estimation is also presented through a secondary compression technique based on subset of link measurements. Experimental evaluation of proposed technique using real world datasets Abilene and GEANT shows that the technique is practical to be used in modern software defined networks. Further, the performance of the scheme is compared with recent state of the art techniques proposed in research literature.

• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.11
• /
• pp.1553-1558
• /
• 2012

This study was conducted to investigate the effects of stocking density or group size on feed intake, daily gain, and carcass characteristics of Hanwoo (Korean indigenous breed) steers reared from 7 months to 31 months of age. Thirty Hanwoo steers were divided into four groups with three replicates each (a total of 12 pens). In each group, one (G1), two (G2), three (G3), and four steers (G4) per pen were allocated as treatments. Pen size was $32.0m^2$, and therefore Hanwoo steers in G1, G2, G3, and G4 were reared under different space allowances, i.e. 32.0, 16.0, 10.6, and $8.0m^2$/steer, respectively. Steers were reared following a conventional beef cattle management method in Korea, and were offered a fixed amount of commercial concentrate with ad libitum forages. Results were subjected to analysis of variance with stocking density as the main effect, and significance was declared at p<0.05. Although total feed intake was not significantly altered, it numerically increased in animals of low stocking density (G1) compared to those subjected to high stocking density treatment (i.e. G4). Feed conversion ratio was higher (p<0.05) in G3 compared to G1 and G2. Animals in G1 (low stocking density) grew faster (p<0.05) than those of high stocking density (G3 and G4). Back fat thickness, meat yield index, and meat yield grade were similar among all levels of stocking density. However, longissimus muscle area was larger in G1 and G2 (p<0.01) compared to G3 and G4, and animals in G3 produced smaller carcasses (p<0.05). Carcass quality traits, including marbling score, meat color, fat color, texture, maturity and meat quality grade, as determined by a group of experts, were not significantly different among the treatments. In conclusion, lower stocking density resulted in increased feed efficiency, daily gain, and carcass weight in Hanwoo steers. However it remains unclear whether such differences are the results of stocking density or group size, or a combination of both. Nonetheless, these results confirm previous studies reporting a negative effect of increased stocking density on animal productivity. Further, animal welfare under an intensive farming system in relation to economical return is discussed.