• Journal of Advanced Marine Engineering and Technology
• /
• 제38권2호
• /
• pp.195-201
• /
• 2014

Flexible risers have been used extensively in recent years for floating and early production systems. Such risers offer the advantage of having inherent heave compliance in their catenary thereby greatly reducing the complexity of the riser-to-rig and riser-to subsea interfaces. Another advantage with flexible risers is their greater reliability. Concerns about fatigue life, gas permeation and pigging of lines have been overcome by extensive experience with these risers in production applications. In this paper, flexible riser analysis results were compared through coupled and uncoupled dynamic analyses methods. A time domain coupled analysis capability has been developed to model the dynamic responses of an integrated floating system incorporating the interactions between vessel, moorings and risers in a marine environment. For this study, SPM (Single Point Mooring) system for an FSU in shallow water was considered. This optimization model was integrated with a time-domain global motion analysis to assess both stability and design constraints of the flexible riser system.

• Earthquakes and Structures
• /
• 제23권3호
• /
• pp.283-295
• /
• 2022

Seismic design codes permit the use of Equivalent Static Analysis of buildings considering torsional eccentricity e with dynamic amplification factors on structural eccentricity and some accidental eccentricity. Estimation of e in buildings is not addressed in codes. This paper presents a simple approximate method to estimate e in RC Moment Frame and RC Structural Wall buildings, which required no detailed structural analysis. The method is validated by 3D analysis (using commercial structural analysis software) of a spectrum of building. Results show that dynamic amplification factor should be applied on torsional eccentricity when performing Response Spectrum Analysis also. Also, irregular or mixed modes of oscillation arise in torsionally unsymmetrical buildings owing to poor geometric distribution of mass and stiffness in plan, which is captured by the mass participation ratio. These irregular modes can be avoided in buildings of any plan geometry by limiting the two critical parameters (normalised torsional eccentricity e/B and Natural Period Ratio 𝜏 =T_𝜃/T, where B is building lateral dimension, T_𝜃 uncoupled torsional natural period and T uncoupled translational natural period). Suggestions are made for new building code provisions.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 춘계학술발표대회 논문집
• /
• pp.114-117
• /
• 2001

A higher order zig-zag plate theory is developed to refine accurately predict fully coupled of the mechanical, thermal, and electric behaviors. Both the displacement and temperature fields through the thickness are constructed by superimposing linear zig-zag field to the smooth globally cubic varying field. Smooth parabolic distribution through the thickness is assumed in the transverse deflection in order to consider transverse normal deformation. Linear zig-zag form is adopted in the electric field. The layer-dependent degrees of freedom of displacement and temperature fields are expressed in terms of reference primary degrees of freedom by applying interface continuity conditions as well as bounding surface conditions of transverse shear stresses and transverse heat flux The numerical examples of coupled and uncoupled analysis are demonstrated the accuracy and efficiency of the present theory. The present theory is suitable for the predictions of fully coupled behaviors of thick smart composite plate under mechanical, thermal, and electric loadings.

• 대한기계학회논문집A
• /
• 제24권6호
• /
• pp.1363-1370
• /
• 2000

Dynamic stability of a flexible spinning disk with angular acceleration is considered. To avoid the coupling between the in-plane and out-of-plane displacements, the linearized strain-displacement relations are used in the Kirchhoff plate theory. The uncoupled governing equations are derived by using Hamilton's principle with considering the angular acceleration. Numerical tests show that existence of the angular acceleration makes a spinning disk dynamically unstable.

• 대한기계학회논문집A
• /
• 제24권10호
• /
• pp.2438-2450
• /
• 2000

The Design Axioms provide a general framework for design methodologies. The axiomatic design framework has been successfully applied to various design tasks. However, the axiomatic design has been rarely utilized in the detailed design process of structures where the optimization technology is generally carried out. The relationship between the axiomatic design and the optimization is investigated and Logical Decomposition method is developed for a systematic structural optimization. The entire optimization process is decomposed to satisfy the Independence Axiom. In the decomposition process, design variables are grouped according to sensitivities. The sensitivities are evaluated by the Analysis of Variance(ANOVA) to avoid considering only local values. The developed method is verified through examples such as the twenty -five members transmission tower and the two -bay-six-story frame.

• Wind and Structures
• /
• 제18권4호
• /
• pp.391-422
• /
• 2014

The high frequency force balance (HFFB) technique provides convenient measurements of integrated forces on rigid building models in terms of base bending moments and torque and/or base shear forces. These base moments or forces are then used to approximately estimate the generalized forces of building fundamental modes with mode shape corrections. This paper presents an analysis framework for coupled dynamic response of tall buildings with HFFB technique. The empirical mode shape corrections for generalized forces with coupled mode shapes are validated using measurements of synchronous pressures on a square building surface from a wind tunnel. An alternative approach for estimating the mean and background response components directly using HFFB measurements without mode shape corrections is introduced with a discussion on higher mode contributions. The uncertainty in the mode shape corrections and its influence on predicted responses of buildings with both uncoupled and coupled modal shapes are examined. Furthermore, this paper presents a comparison of aerodynamic base moment spectra with available data sets for various tall building configurations. Finally, e-technology aspects in conjunction with HFFB technique such as web-based on-line analysis framework for buildings with uncoupled mode shapes used in NALD (NatHaz Aerodynamic Loads Database) is discussed, which facilitates the use of HFFB data for preliminary design stages of tall buildings subject to wind loads.

• 한국지반공학회논문집
• /
• 제23권3호
• /
• pp.15-24
• /
• 2007

본 논문은 도로기초 입상재료의 응력의존적인 특성을 고려한 응력의존적 재료 상수의 적용을 통하여 층 변형예측을 수행하는 간편한 방식을 소개한다. 이 방법은 Unbound지반재료에 대하여 회복변형과 영구변형을 구분하여 고려하며 두 변형의 상호작용을 적용하지 않는 방식이다. 그 결과 회복변형 탄성계수와 포와송비를 포함한 해석모형은 상호작용이 고려되지 않아도 현장에서의 도로기초 변형을 예측할 수 있음을 잘 보여주고 있다. 또한 응력의존 탄성계수와 응력의존 포와송 비 모형에서 가장 영향을 많이 미치는 계수를 찾기 위하여 민감도분석을 실시하였다. 이러한 분석결과를 토대로 응력의존에 의하여 변형 예측시 나타나는 경향을 살펴보았다.

• 한국지반공학회지:지반
• /
• 제13권3호
• /
• pp.5-20
• /
• 1997

본 연구에서는 유한변형률 이론에 근거하여 3차원 압밀 지배 방정식을 유도하였다. 이 방정식은 비교적 압밀층의 두께가 두꺼운 경우, 비선형 물성치, 공극비에 따른 비선형 투수계수를 갖는 지반에 적합하다. 기존의 유한차분 수치해석 기법(FTCS)은 지배 방정식이 비선형 이며 복잡한 경우 안정된 해를 얻을 수 없기 때문에 본 연구에서는 특수 유한 차분 기법을 도입하였다. 이 수치해석 기법을 지배 방정식에 적용하면 시간에 따른 압밀량을 예측할 수 있다. 본 해석기법에 의해 구해진 값들을 윅드레인을 설치한 여러 가지 고압축성 토질에서의 실험 결과와 비교한 결과, 최종 압밀량과 시간에 따른 압말량이 잘 일치하고 있다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1998년도 춘계학술대회논문집; 용평리조트 타워콘도, 21-22 May 1998
• /
• pp.233-237
• /
• 1998

In this work, to identify the dynamic characteristics of disk-spindle system in hard disk drive, experimental modal analysis was performed. And an experimental analysis system including testing apparatus, precision sensors, and analysis software was established in order to perform the testing effectively. From the experimental results, coupled and uncoupled modal characteristics of 3-disk spindle system are clearly identified.

• 한국지반공학회논문집
• /
• 제24권11호
• /
• pp.61-70
• /
• 2008

본 연구에서는 국내 4개 지역에서 시공된 총 10본의 대구경 암반 근입 현장타설말뚝의 양방향 말뚝 선단재하시험과 일반적인 말뚝두부 재하시험을 토대로 하중 재하방식에 따른 말뚝의 침하거동 및 하중전이 거동 특성을 분석하였다. 이로부터 양방향 재하하중을 받는 현장타설말뚝의 등가 말뚝 두부하중침하 거동을 고찰하곤 기존 등가 두부하중침하 곡선 산정방법과의 비교분석을 통하여 주면하중에 의해 추가적인 선단침하량의 영향정도를 분석하였다. 본 연구결과, 주면하중에 의해 발생되는 선단침하량을 고려한 하중전이해석(coupled load transfer analysis)을 통한 하중-침하량 예측값은 정재하 시험결과를 적절히 예측하는 것으로 나타났으나, 근사적 해석법을 통한 등가 하중-침하 곡선 및 일반적인 하중전이해식(uncoupled load transfer analysis)의 예측값은 정재하 시험결과에 비해 침하량을 과소 평가할 수 있음을 알 수 있었다. 하지만, 시험말뚝 근입부분의 암반층이 매우 단단할 경우 주면하중에 의한 선단침하량이 매우 작은 것으로 나타났다.