• Journal of the East Asian Society of Dietary Life
• /
• v.9 no.3
• /
• pp.315-324
• /
• 1999

This study was carried out to evaluate high-school students' nutrient intakes according to the status of body mass index, and to analyze the Physical health status. The volunteers were 560 high school students in 8 provinces, but 511 students were analyzed. It was used questionnaire method as an instrument tool. The questions were composed with socio-demographic characteristics, physical health condition by CMI. and the evaluation of food consumption by 24 hours recall method. Anthrophometric measurement of height and weight was used the data of health chart of each school-class. The family situation of the subjects was mostly nuclear family(73%), agricultural work(53%), and normal living situation(75%). The students of the BMI range of 18-23 were 71%. but those of the overweight(over 23) were 15%. The individual characteristics were different in BMI. Female and third grade students were more of BMI scores. The overall nutrient intakes of students were low compared with Korean RDA of adolescent. especially iron. calcium. vitamin A, and riboflavin. The mean adequacy ratio(MAR) of nutrient intakes was 0.45$\pm$0.23 only. The energy nutrients, ash, and vitamin A intakes were significantly different according to the different BMI groups. But the other mineral and vitamin intakes were not different according to BMI. By the correlation of individual characters with BMI, height was negatively and weight and school grade were positively correlated, but sleeping time and study accomplishment were not correlated. By the correlation of nutrient intakes with BMI, there were negative correlation with the intakes of energy, carbohydrates, potassium, and thiamin. According to this results, We concluded that Korean high-school students living in rural were lower intake of nutrients(iron, vitamin A, and riboflavin) and unbalanced nutrient intakes(MAR of 0.45$\pm$0.23). The state of lower intakes of energy nutrients and vitamin A intakes in higher BMI group mean the students spend their effort to reduce BMI for avoiding obesity. But they need to balanced diet. and good nutrient intakes. These situations would be necessary for students to ameliorate quality of living in rural.

• Korean Journal of Applied Biomechanics
• /
• v.26 no.4
• /
• pp.333-341
• /
• 2016

Objective: The purpose of this study was to assess the consistency of the gliding and push-off motion for single leg skating from the first to fourteenth steps. We hypothesized that: 1) there would be no difference in stroke trajectory, step rate, and cycle rate between the left and right steps of gliding; and 2) there would be a difference in the resultant velocity of toe push-off and the horizontal velocity of the center of mass after six step push-offs. Method: The study included five male 500-m speed skaters (mean height, $1.80{\pm}0.02m$; mean weight, $76.8{\pm}3.96kg$; record, $35.83{\pm}0.30sec$; 100-m record, <9.97 sec). Data were collected from the first to fourteenth steps (40 m) and recorded using five digital JVC GR-HD1KR video cameras (Victor Co., Japan) operating at a sampling frequency of 60 fields/sec and shutter speed of 1/500 sec. For each film frame, the joint positions were digitized using the KWON3D motion analyzer. Position data were filtered with low-pass Butterworth $4^{th}$ order at the cut-off frequency of 7.4 Hz. Results: The right toe of the skating trajectories at $2^{nd}$, $5^{th}$, and $7^{th}$ strokes differed from those of the left toe. The angles of the right and left knee demonstrated unbalanced patterns from the flexion and extension legs. The step and cycle rates of the right and left leg differed from the start until 20 m. The resultant velocities of the toe at the push-off phase and of the body mass center diverged before the six push-offs. Conclusion: This study's findings indicate that the toe of skating trajectory on left and right sliding after push-off should maintain a symmetrical trajectory. The resultant velocity of toe push-off and horizontal velocity from the center of body need to be separated after about six step push-offs.

• The Journal of Engineering Geology
• /
• v.6 no.1
• /
• pp.23-31
• /
• 1996

A stress redistribution process in ground support system is mpdeled taking into consideration of load transfer mechanism of unbalanced load within shotcrete in a rock cavern constructed by NATM. The corresponding analysis model for ground support system is proposed and the elastic behavior of the shotcrete is studied. The effect on the support system due to variation of several design parameters is analysed with the proposed model. The suggested model yields considerably reduced maximum compressive stresses in shotcrete. Both the pressure coefficient in horizontal direction and the elastic modulus of rock mass govern overall responses, whereas the variation of the properties in support system shows a little difference in system responses. Interaction equations for evaluating safety factors for structural members are suggested. The result of this study can be used in the structural safety assessment of underground structures.

• Korean Journal of Community Nutrition
• /
• v.8 no.3
• /
• pp.302-310
• /
• 2003

This study was undertaken to assess nutritional status of the low income elderly residing in Gwangju. Anthropometric data showed that mean height of the subjects was lower than that of Korean Standard Growth data but weight was similar to that standard value. As the subjects became older, their heights and weights were decreased. Body mass index (BMI) in males and females were 22.9 and 24.4 respectively. However, BMI distribution showed that 56% of the elderly females under 75 were underweight. Advancing age conoibutes significant difference in triceps skinfold thickness in females (p < 0.001). Total cholesterol level was higher in the elderly females than the males. It was found that a considerable number of subjects had anemia determined by hemoglobin and hematocrit level, which indicated un iron deficiency. Twenty-four hour dietary recall revealed that, except for phosphorus and vitamin C, all the nutrient intakes of the subjects were below 75％ of Korean RDA. Surprisingly, vitamin A and riboflavin intakes of the elderly were below 50％ of Korean RDA. Energy intakes of the elderly males and females were 58.7% and 59.6% of Korean RDA respectively. Unbalanced energy ratios of carbohydrate, protein and fat were noted in both genders. Nutrient intakes of females' were lower than those of males'. Thus, there was a significant gender difference in nutrient intakes. It might be further suggested that an appropriate nutritional program should be developed and implemented to improve the Poor nutritional status of the low income elderly living in cities.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.840-846
• /
• 2007

This paper investigates the dynamic behavior of a HDD spindle system due to the imperfect roundness of a rotating shaft. The shaft of a spindle motor rotates with eccentricity by the unbalanced mass of the rotating part. The eccentricity generates the run-out of a spindle motor which results in the eccentric motion of a rotating part. Roundness of a shaft affects this motion which limits the memory capacity of a HDD. This research proposes a modified Reynolds equation for the coupled journal and thrust FDBs to include the variable film thickness due to the roundness. Finite element method is used to solve the Reynolds equation for the pressure distribution. Reaction forces and friction torque are obtained by integrating the pressure and shear stress, respectively. The dynamic behavior is determined by solving the equations of a motion of a HDD spindle system in six degrees of freedom with the Runge-Kutta method to characterize the motion of a rotating part. This research shows that the roundness of a rotating shaft causes the excitation frequency with integer multiple of a rotating frequency.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.1
• /
• pp.63-72
• /
• 2011

In recent years, hot-stamped components are more increasingly used in the automotive industry in order to reduce weight and to improve the strength of vehicles. In hot stamping process, blank is hot formed and press hardened in a tool. However, in hot stamping without cooling channel, temperature of the tool increases gradually in mass production thus cannot meet the critical cooling rate to obtain high strength over 1500MPa. Warpage occurs in the hot stamped component due to non-uniform stress state caused by unbalanced cooling. Therefore, tools should be uniformly as well as rapidly cooled down by the coolant which flows through cooling channel. In this paper, optimal design method of cooling channel to obtain uniform and high strength of the component is proposed. Optimized cooling channel is applied to the hot press V-bending process. As a result of measuring strength, hardness and microstructure of the hot formed parts, it is known that the design methodology of cooling channel is effective to the hot stamping process.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.166-169
• /
• 2004

A fatigue test was used to evaluate the fatigue life of an actual structure. The loaded state and the constraint condition of an actual structure must be same as the specimen in order to apply the test results to an actual structure by the specimen. The loaded state and constraint conditions can't be same as the specimen in the actual structure which is complicated. In order to reduce these differences, an actual structure test with a lot of frequencies is need to get a fatigue life curve. Therefore, ten sets of accelerated test units which attached unbalanced mass were composed in this study. Acceleration history about the vibration of an actual structure was acquired. Rainflow counting was used on acceleration history, and the life curve return formula was assumed. The return formula that damage satisfied `1' was acquired in a feedback process by the Miner's rule, which was the linear cumulative damage theory. A conservative fatigue life curve was determined with a return formula to have been presumed by each set. The fatigue life of regular rpm condition was calculated by these conservative fatigue life curves.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.852-858
• /
• 2007

This paper investigates the dynamic characteristics of a tilted HDD spindle system with fluid dynamic bearings (FDBs). Tilting motion of a HDD spindle system may be caused by improper manufacturing tolerance, such as imperfect cylindricity between shaft and sleeve of FDBs, imperfect perpendicularity between shaft and thrust as well as the gyroscopic moment of the unbalanced mass of the rotating part. Tilting motion may result in the instability of the HDD spindle system and it may increase the disk run-out to limit memory capacity. This research proposes a modified Reynolds equation for the coupled journal and thrust FDBs to include the variable film thickness due to the cylindricity and the perpendicularity. Finite element method is used to solve the Reynolds equation for the pressure distribution. Reaction forces and friction torque are obtained by integrating the pressure and shear stress, respectively. The dynamic behavior is determined by solving the equations of a motion of a HDD spindle system in six degrees of freedom with the Runge-Kutta method to study whirling and tilting motions. This research shows that the cylindricity and the perpendicularity increase the tilting angle and whirl radius of the rotor.

• Journal of Yeungnam Medical Science
• /
• v.21 no.2
• /
• pp.133-142
• /
• 2004

Chronic obstructive pulmonary disease(COPD) is characterized by a not entirely reversible limitation in the airflow. An airflow limitation is progressive and associated with an abnormal inflammatory response of the lung to gases and harmful particles. In COPD, the weight loss is commonly observed and there is a negative impact on the respiratory as well as skeletal muscle function. The pathophysiological mechanisms that result in weight loss in COPD are not fully understood. However, the mechanisms of weight loss in COPD may be the result of an increased energy expenditure unbalanced by an adequate dietary intake. The commonly occurring weight loss and muscle wasting in COPD patients adversely affect the respiratory and peripheral muscle function, the exercise capacity, the health status, and even the survival rates. Therefore, it is very valuable to include management strategies that the increase energy balance in order to increase the weight and fat free mass. A Better understanding of the molecular and cellular pathological mechanisms of COPD can improve the many new directions for both the basic and clinical investigations. The Nutritional supply is an important components of a multidisciplinary pulmonary rehabilitation program. Future studies combining an exercise program, the role of anabolic steroids, nutritional individualization, a more targeted nutritional therapy, and the development of new drugs including anti-cytokines is needed for the effective management of COPD.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.2
• /
• pp.128-135
• /
• 2004

Generally, heavy electronic products undergo many different types of shocks in transportation from a manufacturer to customers. Cushioning package is used to protect electronic products from severe shock environments. Since the mass distribution of heavy electronic products is usually unbalanced and complex. it is very difficult to design a cushioning package with having high performance by considering only the equivalent stiffness of that. Therefore, when designing the cushioning package for a heavy electronic product, it is necessary to optimize its shape in order to maximize the cushioning performance. In this study, it is focused on designing an optimal shape of cushioning package for a large refrigerator and an efficient design method is suggested by using a dynamic finite element analysis. As the results of this study the optimal shape of cushioning package, which has high cushioning performance and minimized volume, was obtained through the mechanical drop analysis and a optimization process. Through free drop tests of refrigerators, it was identified that the cushioning performance of the cushioning package was improved up by 25% and the its own volume was reduced by 22 ％.