• 한국환경과학회지
• /
• 제18권6호
• /
• pp.667-674
• /
• 2009

This study has carried out to evaluate the effect of NaCI as electrolyte of single (electrolysis and UV process) and complex (electrolysis/UV) processes for the purpose of removal and mineralization of Rhodamine B (RhB) dye in water. It also evaluated the synergetic effect on the combination of electrolysis and UV process. The experimental results showed that RhB removal of UV process was decreased with increase of NaCl, while RhB removal of electrolysis and electrolysis/UV process was increased with increase of NaCI. The decolorization rate of the RhB solution in every process was more rapid than the mineralization rate identified by COD removal. The latter took longer time for further oxidation. Absorption spectra of an aqueous solution containing RhB showed a continued diminution of the RhB concentration in the bulk solution: concomitantly, no new absorption peaks appeared. This confirmed the decolorization of RhB, i.e., the breakup of the chromophores. It was observed that RhB removal in electrolysis/UV process is similar to the sum of the UV and electrolysis. However, it was found that the COD of RhB could be degraded more efficiently by the electrolysis/UV process than the sum of the two individual process. A synergetic effect was demonstrated in electrolysis/UV process.

• Fisheries and Aquatic Sciences
• /
• 제15권4호
• /
• pp.361-363
• /
• 2012

We investigated ultraviolet (UV) absorption materials from Russian seaweeds. First, the UV absorptivities of five seaweeds Gloiopeltis fucatas, Mazzaella sp., Mastocarpus pacificus, Laminaria cichorioides, Saccharina japonica were evaluated by a UV spectrometer. Of these seaweeds, Gloiopeltis fucatas and Mazzaella sp. showed high levels of UV absorption. Column chromatography of active 50% aqueous ethanol extracts from Gloiopeltis fucatas and Mazzaella sp. resulted in the purification of two known compounds. Spectroscopic techniques identified their structures as shinorine and palythine. These materials exhibited UV absorptive capabilities at wavelengths of 333 and 320 nm, respectively. These results suggest that Gloiopeltis fucatas and Mazzaella sp. may be useful as natural cosmeceutical sources.

• 한국식품과학회지
• /
• 제13권2호
• /
• pp.114-120
• /
• 1981

색소(色素)를 흡착(吸着)시킨 여지(濾紙)를 시료(試料)로 간섭(干涉)필터를 통한 자다선(紫多線)을 조사(照射)한 경우에 $45^{\circ}$ 반사각(反射角)에서 발광(發光) 및 소광(消光)의 세기를 측정하여 신속하고 간편하게 색소(色素)를 감별(鑑別)할 수 있는 방법(方法)을 시도(試圖)하였다. 발광(發光) 스펙트럼 보다는 흡수(吸收) 스펙트럼이 보다 특징적인 패턴을 나타냈다. 흡수대(吸收帶)의 파장영역(波長領域), 분포상태(分布狀態) 및 개수(個數)와 소광(消光)정도를 조사하므로써 착색료(着色料) 종류가 용이하게 판별되었다.

• Journal of the Korean Wood Science and Technology
• /
• 제12권3호
• /
• pp.35-40
• /
• 1984

지리산산(智異山産) 침엽수재(針葉樹材) 10개(個) 수종(樹種)에 대(對)한 AcBr lignin의 UV spectrum을 조사(調査)하여 본 바 각(各) 수종(樹種) 모두 spectrum curve의 정점(頂點)은 249nm(Max. peak), 267-268nm(Shallow min. peak), 280nm(Lower max. peak)에 있었으며 Bjorkman lignin이나 lignin sulfonic acid 등(等)의 UV spectrum 상(上)에서 볼 수 있는 견(肩)은 AcBr lignin의 spectrum curve 상(上)에서는 볼 수 없었으며 각(各) 정점(頂點)의 10개(個) 수종(樹種) 평균(平均) 흡광도(吸光度)와 흡광계수(吸光係數)는 249nm에 각각(各各) $0.367{\pm}0.0015$, $24.56{\pm}0.0535$, 267-268nm에서 $0.278{\pm}0.0016$, $18.50{\pm}0.0569$ 였고 280nm에서는 $0.306{\pm}0.0016$, $20.42{\pm}0.0627$ 이었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.283-283
• /
• 2011

The n-doping effect by doping metal carbonate into an electron-injecting organic layer can improve the device performance by the balanced carrier injection because an electron ohmic contact between cathode and an electron-transporting layer, for example, a high current density, a high efficiency, a high luminance, and a low power consumption. In the study, first, we investigated an electron-ohmic property of electron-only device, which has a ITO/$Rb_2CO_3$-doped $C_{60}$/Al structure. Second, we examined the I-V-L characteristics of all-ohmic OLEDs, which are glass/ITO/$MoO_x$-doped NPB (25%, 5 nm)/NPB (63 nm)/$Alq_3$ (32 nm)/$Rb_2CO_3$-doped $C_{60}$(y%, 10 nm)/Al. The $MoO_x$doped NPB and $Rb_2CO_3$-doped fullerene layer were used as the hole-ohmic contact and electron-ohmic contact layer in all-ohmic OLEDs, respectively, Third, the electronic structure of the $Rb_2CO_3$-doped $C_{60}$-doped interfaces were investigated by analyzing photoemission properties, such as x-ray photoemission spectroscopy (XPS), Ultraviolet Photoemission spectroscopy (UPS), and Near-edge x-ray absorption fine structure (NEXAFS) spectroscopy, as a doping concentration at the interfaces of $Rb_2CO_3$-doped fullerene are changed. Finally, the correlation between the device performance in all ohmic devices and the interfacial property of the $Rb_2CO_3$-doped $C_{60}$ thin film was discussed with an energy band diagram.

• 한국의류학회지
• /
• 제35권2호
• /
• pp.218-229
• /
• 2011

Dyeing properties of cotton and ramie fabrics with pine needles colorants were studied by investigating the analysis of pine needles colorants, the effect of dyeing conditions (such as dye concentration, dyeing temperatures and times on dye uptakes), effect of mordants, and color change. The various colorfastness of dyed fabrics were evaluated for practical use; in addition, the antimicrobial ability, ultraviolet-cut ability, and deodorant ability were estimated. In the UV-Visible spectrum, the wavelength of the maximum absorption for pine needles extract was 285nm, and pine needles colorants produced a yellow color. From FT-IR and GC-MS results, it was assumed that chromophoric substance from pine needles extracts were mixed with flavonol tannin and flavanol tannin. An increased dyeing concentration resulted in a larger dye uptake and a Freundlich absorption isotherm was obtained. A larger dye uptake occurred as the dyeing time and temperature increased. Post-mordanting was more effective than pre-mordanting and the dye uptake of fabrics improved by mordanting. The colorfastness of dyed fabrics showed a low rating; however, colorfastness to washing and dry cleaning of cotton fabrics mordanted with N.Cu, and friction fastness of ramie fabric mordanted with Cu improved. The dyed fabrics showed very good antimicrobial abilities of 99.9%. In addition, the ultraviolet-cut ability and deodorant ability improved in fabrics dyed with pine needles extracts.

• 한국의류학회지
• /
• 제35권2호
• /
• pp.206-217
• /
• 2011

The dyeing properties of cotton fabrics with bamboo colorants were studied by investigating the analysis of bamboo colorants, the effect of dyeing conditions (dye concentrations, dyeing temperatures and times on dye uptakes), effect of mordants, and color change. The various colorfastness of dyed fabrics were evaluated for practical use; in addition, the antimicrobial ability, ultraviolet-cut ability, and deodorant ability were also estimated. In the UV-Visible spectrum, the wavelength of the maximum absorption for bamboo stems and leaves extracts was found to be 280nm and 295nm, respectively; in addition, bamboo colorants produced a yellow color. From the FT-IR and GC-MS results, it was assumed that the chromophoric substance from bamboo extracts was composed of flavones substances with tricin. An increased dyeing concentration resulted in a larger dye uptake and a Freundlich absorption isotherm was obtained. A larger dye uptake occurred as the dyeing time and temperature increased. The post-mordanting was more effective than pre-mordanting. Mordants, Fe and N.Fe, were effective for an increased dye uptake. The color of fabrics mordanted with Cu and N.Cu changed to GY. Regardless of mordanting, the colorfastness on the washing of dyed fabrics showed a low rating compared to other fastness. Mordanting adversely affected the lightfastness of dyed fabric. The dyed fabric showed very good antimicrobial abilities of 99.9%. In addition, the ultraviolet-cut ability and deodorant ability improved in cotton fabric dyed with bamboo extracts.

• Food Science and Biotechnology
• /
• 제15권1호
• /
• pp.5-12
• /
• 2006

Degradation performance of environmentally friendly plastics that can be disintegrated by combination of sunlight, microbes in soil, and heat produced in landfills was evaluated for use in industries. Two multi-degradable master batches (MCC-101 and MCC-102 were manufactured, separately mixed with polyethylene using film molding machine to produce 0.025 mm thick films, and exposed to sunlight, microbes, and heat. Low- and high-density polyethylene (LDPE and HDPE) films containing MCC-101 and MCC-102 became unfunctional by increasing severe cleavage at the surface and showed high reduction in elongation after 40 days of exposure to ultraviolet light. LDPE and HDPE films showed significant physical degradation after 100 and 120 days, respectively, of incubation at $68{\pm}2^{\circ}C$. SEM images of films cultured in mixed mold spore suspension at $30^{\circ}C$ and 85% humidity for 30 days revealed accelerated biodegradation on film surfaces by the action of microbes. LDPE films containing MCC-l01 showed absorption of carbonyls, photo-sensitive sites, at $1710\;cm${-1}$ when exposed to light for 40 days, whereas those not exposed to ultraviolet light showed no absorption at the same frequency. MCC-101-based LDPE films showed much lower $M_w$ distribution after exposure to UV than its counterpart, due to agents accelerating photo-degradation contained in MCC-101.

• 한국진공학회지
• /
• 제12권4호
• /
• pp.275-280
• /
• 2003

Si(III) 표면위에 Gd$_2O_3:Eu^{3+}$ 결정성 형광체 박막을 이온화 집단체 증착방법으로 증착하여 이온선을 주입, 결정을 파괴한 후에 열처리를 통하여 결정구조를 변화시켰다. 초기 생장시의 결정성은 고에너지 전자회절 (RHEED)을 통해 확인하고, X선 회절과 적외선 분광법을 이용하여 시료의 결정구조의 변화를 관측하였다. Near Edge X-ray Absorption Fine Structure (NEXAFS)를 통해 전자구조의 변화를 확인하였다. 이러한 변화들이 발광 특성에 미치는 영향을 Photoluminescence (PL), Cathodoluminescence (CL), 그리고 Vacuum Ultraviolet (VUV) spectrum으로 알아보았다. 본 연구는 결정구조에 의해 변화된 전자구조가 형광체 박막의 발광특성에 미치는 영향을 보고한다.

• 한국환경과학회지
• /
• 제21권7호
• /
• pp.845-853
• /
• 2012

Diethyl phthalate (DEP) is widely spread in the natural environment as an endocrine disruption chemicals (EDs). Therefore, in this study, ultrasound (US) and ultraviolet (UVC), including various applied power density (10-40 W/L), UV wavelengths (365 nm, 254 nm and 185 nm) and frequencies (283 kHz, 935 kHz) were applied to a DEP contaminated solution. The pseudo-first order degradation rate constants were in the order of $10^{-1}$ to $10^{-4}\;min^{-1}$ depending on the processes. Photolytic and sonophotolytic DEP degradation rate also were high at shortest UV wavelength (VUV) due to the higher energy of photons, higher molar absorption coefficient of DEP and increased hydroxyl radical generation from homolysis of water. Sonolytic DEP degradation rate increased with increase of applied input power and the dominant reaction mechanism of DEP in sonolysis was estimated as hydroxyl radical reaction by the addition of t-BuOH, which is a common hydroxyl radical scavenger. Moreover, synergistic effect of were also observed for sonophotolytic degradation with various UV irradiation.