• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.9.2-9.2
• /
• 2011

Ultrathin polyelectrolyte (PE) multilayer films prepared by the versatile layer-by layer (LbL) assembly method have been utilized for the preparation of light-emitting diodes, electrochromic, membrane, and drug delivery system, as well as for selective area patterning and particle surface modification because the various materials with specific properties can be inserted into the film with nano-level thickness irrespective of the size or the shape of substrate. Since the introduction of the LbL technique in 1991 by Decher and Hong, various hydrophilic materials can be inserted within LbL films through complementary interactions (i.e., electrostatic, hydrogen-bonding or covalent interaction). In this study, it is demonstrated that LbL SA multilayer films based on nucleophilic substitution reaction can allow the preparation of the highly efficient magnetic and/or optical films and nonvolatile memory devices.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.237-237
• /
• 2006

P(VDF/TrFE(72/28) ultrathin films were used in the fabrication of Metal-Ferroelectric polymer-Metal (MFM) single bit device with special emphasis on uniform film surface, faster dipole switching time under applied external field and longer memory retention time. AFM and FTIR-GIRAS were complementary in analyzing surface crystalline morphology and the resultant change in chain orientation with varying thermal history. DC-EFM technique was used to 'write-read-erase' the data on the memory bit in a much faster time than P-E studies. The results obtained from this study will enable us to have a good understanding of the ferroelectric and piezoelectric behavior of P(VDF/TrFE)(72/28) thin films suitable for high density data storage applications.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.190-193
• /
• 2006

we implemented pentacene TFTs able to operate at low voltage less than 2V by using ultrathin Al2O3 layer as a gate insulator. The OTFTs exhibited a mobility of $0.27{\pm}0.05\;cm^2/Vs$, an outstanding subthreshold slope of $0.109{\pm}0.027$, and an on/off current ratio of $2.87{\pm}1.07{\times}10^4$. OTFT operated at low voltage, producing 3.5uA at $V_GS$= 2V and $V_DS$= 1.5V.

• Proceedings of the KIEE Conference
• /
• 1993.11a
• /
• pp.174-177
• /
• 1993

The polyimide films were prepared by imidizing the polyamic acid long-chain alkylamine (dimethylhexadecylamine) salt films with a thermal and chemical treatment, where the polyamic acid alkylamine salt film were formed on various substrates by using Langmuir-Blodgett (LB) method. The imidization of polyamic acid alkylamine salt films with various thickness were identified with FT-IR and UV-visible absorption spectroscopies. Atomic Force Microscopy (AFM) have been used to investigate the surface morpology of polyamic acid alkylamine salt and imidized films.

• Current Optics and Photonics
• /
• v.1 no.3
• /
• pp.239-246
• /
• 2017

A compact plasmonic switching scheme, based on the phase change of a thin-film chalcogenide material ($Ge_2Sb_2Te_5$), is proposed and numerically investigated at optical-communication wavelengths. Surface plasmon polariton modal analysis is conducted for various thicknesses of dielectric and phase-change material layers, and the optimized condition is induced by finding the region of interest that shows a high extinction ratio of surface plasmon polariton modes before and after the phase transition. Full electromagnetic simulations show that multiple reflections inside the active region may conditionally increase the overall efficiency of the on/off ratio at a specific length of the active region. However, it is shown that the optimized geometrical condition, which shows generally large on/off ratio for any length of active region, can be distinguished by observing the multiple-reflection characteristic inside the active region. The proposed scheme shows an on/off switching ratio greater than 30 dB for a length of a few micrometers, which can be potentially applied to integrated active plasmonic systems.

• Journal of Sensor Science and Technology
• /
• v.27 no.1
• /
• pp.25-30
• /
• 2018

Closed-form analytical expressions and 3-dimensional normalized charts for the homogeneous sensing and surface sensing structures are derived to provide the conditions for the maximum sensitivity of integrated-optic biosensors based on evanescent-wave and stepindex planar optical waveguides. The analysis is made for transverse electric (TE) polarization mode, in both cases where the measurand is homogeneously distributed in the cover (namely, homogeneous sensing), and where it is an ultrathin film on the waveguide-cover interface (namely, surface sensing).

• Applied Chemistry for Engineering
• /
• v.7 no.6
• /
• pp.1142-1146
• /
• 1996

Cholesterol-containing surfactant was synthesized, and it was sonicated with monomer in water to form a vesicle solution. This vesicle solution was dried to construct a membrane which had a molecular multilayer structure. Using UV irradiation the monomer in this membrane were polymerized, and then surfactant was extracted by organic solvent. Using a X-ray diffractometer, the thickness of one layer and the regularity of the multilayer were measured. And scanning electron microscopy was conducted for fractured polymer film.

• Journal of the Korean Magnetics Society
• /
• v.8 no.2
• /
• pp.99-110
• /
• 1998

MR head technology from the perspective of read sensor evolution was reviewed. AMR sensors have been developed for last two decades and successfully employed into information storage devices such as disk drives. Development of manufacturable GMR sensors is of emerging technological interest because GMR sensors can further meet the need of ultrahigh recording density. In this review, the mechanisms, materials systems, operating principles of both AMR an GMR sensors, and the head structures were discuseed. Constructing GMR heads with ultrathin sensor materials and complex topographical structures demands unique fabrication and design challenges. The commercialization of GMR heads can only be realized by the succesful implementations of high performance materials, advanced thin film processes, and stable head design.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2013.05a
• /
• pp.178-178
• /
• 2013

고 해상도를 요구하는 차세대 디스플레이에서 ITO 박막은 매우 얇은 두께에서 높은 투과율과 고 전도성을 동시에 가져야 한다. 특히, 매우 얇은 박막의 경우 비정질 기판의 영향을 크게 받아 박막 초기 핵생성 및 성장에 대하여 영향을 크게 받는다. 따라서 이러한 초기 박막 핵 생성 및 성장을 제어하기 위해 불순물 Ce 함량에 따른 ITO 초박막의 전기적, 미세구조적 특성 변화를 확인하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.491-494
• /
• 2000

Conductive Langmuir-Blodgett(LB) films have recently attracted much interest from the viewpoint of ultrathin film conductors at the molecular level. The result shows that the Maxwell-displacement-current(MDC) measuring technique is useful in the detection of phase-transition over the entire range of molecule areas. At the liquid-solid phase transition, a striking feature in the present current measurement was observed; the I-A isotherm for a DPPC monolayer has sharp bend. Dynamic behavior of monolayers in the presence of an external field was also investigated using the current-measuring technique. Dynamic behavier of DPPC monolayer was measured by displacement current when the molecules are stimulated by pressure velocity. As result, it is known that current is generated of higher current pe마 as compression velocity become faster. Also, in order to clarify the reorganization of the lipid monolayers, it is instructive to plot the relationship between I and 1/$A^2$.