• Journal of Mechanical Science and Technology
• /
• v.16 no.12
• /
• pp.1627-1632
• /
• 2002

In this paper, a simplified ultrasonic CT system, which uses the information in three directions, that is, 90°, ＋45° and －45°about the inspection plane, is applied to the high strength steel, and the frequency analysis method for enhancing the C scan or CT image is developed. This frequency analysis method is based on the frequency response property of the material. By comparing the magnitudes in the frequency domain, the special frequency which shows a significant difference between the welded joint and base material was found and used to obtain a C scan or CT image. Experimental results for several kinds of specimens, having a welded joint by electron beam welding, a weld joint by arc welding, on a fatigue crack, showed that the obtained C scan or CT image has better resolution than the results of previous experiments using the maximum value of the received waveform.

• Smart Structures and Systems
• /
• v.11 no.2
• /
• pp.185-197
• /
• 2013

We developed a simultaneous strain measurement and damage detection technique using a pair of surface-mounted piezoelectric transducers and a fiber connecting them. This is a novel sensor configuration of the fiber acoustic wave (FAW) piezoelectric transducer. In this study, lead-zirconate-titanate (PZT) transducers are installed conventionally on a plate's surface, which is a technique used in many structural health monitoring studies. However, our PZTs are also connected with an optical fiber. A FAW and Lamb wave are simultaneously guided in the optical fiber and the structure, respectively. The dependency of the time-of-flight of the FAW on the applied strain is quantified for strain sensing. In our experimental results, the FAW exhibited excellent linear behavior and no hysteresis with respect to the change in strain. On the other hand, the well-known damage detection function of the surface-mounted PZT transducers was still available by monitoring the waveform change in the conventional Lamb wave ultrasonic path.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.403-408
• /
• 1999

In this paper, ultrasonic tomography by the Mode-Converted Rayleigh wave (MCRW) in the back-scattered direction is presented. When a beam with a short pulse and narrow beam width enters a reflector with smooth surface, in general, two major arrivals can be observed in the output waveform: the specular reflection and the radiation of the MCRW from the reflector surface. The time-delay between the two waves is relatively large and thus can be measured easily. This large time-delay is due to the fact that the MCRW is slower than incident wave. In our method, this large time- delay is used for ultrasonic image reconstruction. To effectively detect the MCRW, the arrayed-receiving transducers are circularly arranged around the transmitter. In addition, a deconvolution method is employed to remove specular echo signals for reconstructing the MCRW image.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 1999.11a
• /
• pp.296-298
• /
• 1999

Out of the defects occurred in a transformer, the cases of protrusion and surface discharge were simulated by using needle-plane and IEC(B) electrode. The waveform and frequency characteristics of ultrasonic signals due to partial discharge occurred at each electrode were analyzed. And then, the ultrasonic signal characteristics from the partial discharge due to the two kinds of defect were compared. As a result, in the case of the protrusion and surface discharge, the waveforms were similar, but the frequency spectra were different.

• Journal of the Korean Institute of Navigation
• /
• v.20 no.3
• /
• pp.85-95
• /
• 1996

In the velocimeter, the ultrasonic pulse signal is used for measuring the profile velocity of moving targets distributed in space because of the merits of its high distance resolution and harmless affect to the human body. The velocity reading in conventional ultrasonic pulsed velocimeter depends on the wave pattern reflecting the spatial distribution of scatters and includes observational error due to the signal processing of analyzing pulse signal. In this paper, we evaluate an influence of the received waveform of pulsed signal on the velocity information by setting a model. Subsequently, in order to improve the distance resolution and to obtain precise velocity information without the influence of the spatial distribution of scatterers, we propose a new method for the analysis of Doppler pulsed signal, in which the pulsed signal is transformed into a phase function with local data. Finally, it is confirmed that the performance of the velocimeter is more improved in the proposed method than in the conventional one.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.10 s.241
• /
• pp.1430-1437
• /
• 2005

It is very important to achieve a high reproducibility in the ultrasonic measurement of bone mineral density. In this study, we examined number of sampling waveform, control of temperature, diameter of region of interest as factors to improve reproducibility. We decided the optimal number of waveforms to be converted to frequency domain as period of 1. We have minimized the effects of variable temperature and constrained generation of micro bubble by keeping temperature within a range of $32\pm0.5^{\circ}C$ with a precise temperature controlling algorithm. We also found the optimal diameter of region of interest to be 13mm. In this paper, we demonstrated the improved reproducibility by controlling various factors affecting the ultrasonic measurement of bone mineral density.

• Journal of Korea Multimedia Society
• /
• v.19 no.2
• /
• pp.105-111
• /
• 2016

In order to inspect the quality of spot welding, inefficient destructive test and NDT (non destructive testing) utilizing expensive foreign ultrasonic inspection are being conducted in the automobile production lines, but NDT will be difficult to be used in the domestic automobile production due to complexity of the waveform analysis and lack of mobility. In this paper, NDT system inspecting the quality of spot welding based on mobile network is proposed to complement drawbacks of the conventional inefficient destructive testing and NDT inspecting the quality of spot welding. Regardless of daily condition of NDT tester, the proposed NDT system can determine the quality of spot welding automatically and transmit the information of NDT quality to smart devices of field workers in real-time so that convenience of NDT and productivity of automobile production will be improved. Several specimens with a variety of welding quality was produced to evaluate the performance of the proposed mobile ultrasonic NDT system and the conventional foreign equipment, through this experiments, the proposed mobile ultrasonic NDT system indicate the superior properties compared to the conventional equipment in terms of convenience, productivity, and economic.

• Journal of Welding and Joining
• /
• v.22 no.2
• /
• pp.38-45
• /
• 2004

Ultrasonic signals transmitted through adhesively bonded plates were used to evaluate parameters related to attenuation and frequency in the adhesively bonded joint. The kinds of bonding materials with a different bonding thickness of constant pressure were used. And ultrasonic diagnosis was evaluated by p-wave sensor of 10MHz. FFT has been performed to determine bond-layer parameters such as effective thickness and frequency for adhesively bonded joint of A16061 plates in comparison with measured to theoretical ratios. When variable thickness exists, the ultrasonic spectrum was changed the frequency wave. The more materials thickness and the higher the frequency, the larger shift was observed. Measured ratios for cases of bond thickness and variety bonding materials are then used to determine bond parameters. The results show that the technique can be applied to the characterization of adhesively bonded joint.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.20 no.6
• /
• pp.511-520
• /
• 2000

Ultrasonic pulse echo method comes to be difficult to apply to the multi-layered structure with very thin layer, because the echoes from the top and the bottom of the layer are superimposed. We can easily meet this problem when the silicon chip layer in the semiconductor is inspected by a SAM equipment using fairly low frequency lower than 20MHz by which severe attenuation in the epoxy mold compound of packaging material can be overcome. Conventionally, deconvolution technique has been used for the decomposition of superimposed UT signals, however it has disabilities when the waveform of the transmitted signal is distorted according to the propagation. In this paper, the wavelet transform based deconvolution(WTBD) technique is proposed as a new signal processing method that can decompose the superimposed echo signals with superior performances compared to the conventional deconvolution technique. WTBD method uses the wavelet transform in the pre-stage of deconvolution to extract out the common waveform from the transmitted and received signal with distortion. Performances of the proposed method we shown by through computer simulations using model signal with noise and we demonstrated by through experiments for the fabricated semiconductor sample with partial delamination at the top of silicon chip layer.

• Journal of Welding and Joining
• /
• v.21 no.5
• /
• pp.555-560
• /
• 2003

In automobile industry, it is necessary to reduce the weight from the view point of energy and environmental problems in these days. One of the ways for weight reduction is using adhesive aluminum structures. In this study, ultrasonic signals reflected from the adhesively bonded joint layer are used to evaluate the adhesively bonded joints. FFT is performed to determine bond-layer parameters such as effective thickness and frequency for adhesively bonded joint Al 6061 plates in comparison with the measured and theoretical ratios. And the parameters of ultrasonic wave and the J-integral are investigated to evaluate the adhesively bonded joint strength by DCB specimens.