• 한국전기전자재료학회논문지
• /
• 제13권11호
• /
• pp.963-968
• /
• 2000

Magnetic properties and microstructures of Fe$\_$93-x/Zr$_3$B$_4$Ag$\_$x/ thin films were investigated as a function of addition of element Ag, (X$\_$Ag/=0 to 6 at.%) and annealing temperature, T$\_$a/=300$\^{C}$ to 600$\^{C}$. In the case of adding Ag, magnetic properties of Fe$\_$93-x/Zr$_3$B$_4$Ag$\_$x/ thin films were improved than those of Ag-free Fe$\_$93/Zr$_3$B$_4$thin films. The prominent soft magnetic properties with coercivity of 1.1 Oe, saturation magnetization of 2.2 T and permeability of 5400 at 50㎒ were obtained from Fe$\_$88/Zr$_3$B$_4$Ag$\_$5/ thin film annealed was lower than that of Fe-base or Co-base thin films reported previously. Such enhanced magnetic properties are presumably attributed to the format in ultra fine grains. Also, the reduced eddy current loss in the annealed sample is due to refined micro magnetic domains with increasing the amount of Ag in Fe$\_$93-x/Zr$_3$B$_4$Ag$\_$x/ thin films.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 하계종합학술대회논문집
• /
• pp.343-346
• /
• 1998

Ultra-thin gate oxide in MOS devices are subjected to high-field stress during device operation, which degrades the oxide and exentually causes dielectric breakdown. In this paper, we investigate the electrical properties of ultra-thin nitrided oxide (NO) and reoxidized nitrided oxide(ONO) films that are considered to be promising candidates for replacing conventional silicon dioxide film in ULSI level integration. We study vriations of I-V characteristics due to F-N tunneling, and time-dependent dielectric breakdown (TDDB) of thin layer NO and ONO depending on nitridation and reoxidation condition, and compare with thermal $SiO_{2}$. From the measurement results, we find that these NO and ONO thin films are strongly depending on its condition and that optimized reoxided nitrided oxides (ONO) films show superior dielectric characteristics, and breakdown-to-change ( $Q_{bd}$ ) performance over the NO films, while maintaining a similar electric field dependence compared to NO layer.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.465-468
• /
• 1999

Electrical properties of metal-ferroelectric-semiconductor field effect transistor(MFSFET) using $BaMgF_4$ thin films grown on p-Si(100) substrates have been investigated. $BaMgF_4$ thin films have been directly deposited on the p-Si(100) wafers at a low temperature of $300^{\circ}C$ in an ultra high vacuum(UHV) system. First an in-situ post-deposition annealing was conducted for 20s at $650^{\circ}C$ and second an in-situ post-annealing was conducted for 10s at $950^{\circ}C$. The electrical properties of MFSFET compared with using A1 and Pt electrodes.

• 한국안광학회지
• /
• 제7권2호
• /
• pp.163-167
• /
• 2002

$Ni(OH)_2/Ni$ Glass 박막에서 전기변색 속도 개선에 대한 연구를 수행하였다. 이는 선글라스의 변색속도가 수분 이상 소요되는 단점을 해결하고자 e-beam evaporator를 이용하여 니켈 금속 박막을 증착시킨 후, 전기화학적 산화-환원 반응으로 $Ni(OH)_2$에 대한 전기변색 특성을 연구하였다. 전기전도성을 갖는 ITO 에서보다 Glass 위에서의 $Ni(OH)_2$의 변색 속도가 오히려 빠르다. 이는 전위와 투과율을 측정함으로서 알 수 있다. XPS를 이용하여 Glass와 $Ni(OH)_2$ 사이의 초박막(${\sim}10{\AA}$) Ni 금속의 존재를 확인하였고, 이 나노 박막은 전기변색 장치의 응답 속도에 영향을 마쳤다. 기존의 선글라스가 5분 정도 소요되는 반면 니켈 나노 박막을 이용한 변색소자에서는 1~2초 정도 소요된다. 이론적으로는 수 ms 이내이지만 전기적 저항으로 인해 초 단위의 응답속도를 보이고 있다.

• 한국산학기술학회논문지
• /
• 제12권1호
• /
• pp.384-389
• /
• 2011

본 논문은 스마트 그리드에 사용할 수 있는 저항성 전력 분배기에 관한 연구이다. 미래 스마트 그리드에서는 고속 전력선 통신이 실용화 단계에 이를 것으로 예상되므로, 전력 분배기의 초고주파수 응답 또한 그 중요성을 가지고 있다. 본 논문에서는 thin-film 기술을 사용한 저항성 전력 분배기를 설계, 측정 및 분석을 하였다. 고주파 전송 신호선 제작을 위해 코플라나 전송 선로를 제작, 측정하였다. 3 dB 차단 주파수는 72 GHz로 측정되었으며, S11의 크기는 70 GHz까지 <-20 dB 특성을 보였다. 저항성 전력 분배기 제작을 위해 델타형 구성으로된 회로를 thin-film 기술을 이용하여 제작하였다. 3 dB 차단 주파수는 50 GHz를 보였다. 저항성 전력 분배기의 고속 입력 신호 (40 Gb/s)가 이론에서 예상한 대로 6 dB의 삽입 손실을 가지며 전송되는 것을 실험적으로 확인하였다.

• Journal of the Optical Society of Korea
• /
• 제13권1호
• /
• pp.65-74
• /
• 2009

Device quality indium tin oxide (ITO) films are deposited on glass substrates and ultra-thin diamond-like carbon films are deposited as a buffer layer on ITO by a pulsed Nd:YAG laser at 355 nm and 532 nm wavelength. ITO films deposited at room temperature are largely amorphous although their optical transmittances in the visible range are > 90%. The resistivity of their amorphous ITO films is too high to enable an efficient organic light-emitting device (OLED), in contrast to that deposited by a KrF laser. Substrate heating at $200^{\circ}C$ with laser wavelength of 355 nm, the ITO film resistivity decreases by almost an order of magnitude to $2{\times}10^{-4}\;{\Omega}\;cm$ while its optical transmittance is maintained at > 90%. The thermally induced crystallization of ITO has a preferred <111> directional orientation texture which largely accounts for the lowering of film resistivity. The background gas and deposition distance, that between the ITO target and the glass substrate, influence the thin-film microstructures. The optical and electrical properties are compared to published results using other nanosecond lasers and other fluence, as well as the use of ultra fast lasers. Molecularly doped, single-layer OLEDs of ITO/(PVK+TPD+$Alq_3$)/Al which are fabricated using pulsed-laser deposited ITO samples are compared to those fabricated using the commercial ITO. Effects such as surface texture and roughness of ITO and the insertion of DLC as a buffer layer into ITO/DLC/(PVK+TPD+$Alq_3$)/Al devices are investigated. The effects of DLC-on-ITO on OLED improvement such as better turn-on voltage and brightness are explained by a possible reduction of energy barrier to the hole injection from ITO into the light-emitting layer.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.77-80
• /
• 2001

Crystallographic and magnetic characteristics of CoCr-based magnetic thin film for perpendicular magnetic recording media were influenced on preparing conditions. In these, there is that substrate temperature was parameter that increases perpendicular coercivity of CoCrTa magnetic layer using recording layer. While preparation of CoCr-based doublelayer, by optimizing substrate temperature, we expect to increase perpendicular anisotropy of CoCr magnetic layer and prepare ferromagnetic recording layer with a good quality by epitaxial growth. CoCrTa/Si doublelayer showed a good dispersion angle of c-axis orientation $\Delta$$\theta$$_{50}$ caused by inserting amorphous Si underlayer which prepared at underlayer substrate temperature 250C. Perpendicular coercivity was constant, in-plane coercivity was controlled a low value about 2000e. This result implied that Si underlayer could restrain growth of initial layer of CoCrTa thin film, which showed bad magnetic properties effectively without participating magnetization patterns of magnetic layer. In case of CoCrTa/Si that prepared with ultra thin underlayer, crystalline orientation of CoCrTa was improved rather underlayer thickness 1nm, it was expected that amorphous Si layer played a important role in not only underlayer but also seed layer.t also seed layer.r.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.300-303
• /
• 2001

BSCCO thin films are fabricated via a co-deposition process by an ion beam sputtering with an ultra-low growth rate, and sticking coefficients of the respective elements are evaluated. The sticking coefficient of Bi element exhibits a characteristic temperature dependence : almost a constant value of 0.49 below $730^{\circ}C$ and decreases linearly with temperature over $730^{\circ}C$. This temperature dependence can be elucidated from the evaporation and sublimation rates of bismuth oxide, $Bi_{2}O_{3}$, from the film surface. It is considered that the liquid phase of the bismuth oxide plays an important role in the Bi 2212 phase formation in the co-deposition process.

• 한국전기전자재료학회논문지
• /
• 제13권1호
• /
• pp.80-84
• /
• 2000

BSCCO thin films are fabricated via a co-deposition process by an ion beam sputtering with an ultra-low growth rate, and sticking coefficients of the respective elements are evaluated. The sticking coeffi-cient of Bi element exhibits a characteristic temperature dependence : almost a constant value of 0.49 below 73$0^{\circ}C$ and decreases linearly with temperature over 73$0^{\circ}C$. This temperature dependence can be elucidated from the evaporation and sublimation rates of bismuth oxide, Bi\ulcornerO\ulcorner, from the film surface. It is considered that the liquid phase of the bismuth oxide plays an important role in the Bi(2212) phase formation in the co-deposition process.

• 한국레이저가공학회:학술대회논문집
• /
• 한국레이저가공학회 2006년도 춘계학술발표대회 논문집
• /
• pp.108-111
• /
• 2006

Recently, mobile information devices, such as cellular phone, PDA(Personal Digital Assistant, PDA) are getting smaller and thinner. Accordingly, ultra precision welding technology is required to manufacture the high performance system for use in the telecommunication industry. In this study, we propose the laser micro welding process. Using ytterbium fiber laser, a wide range of experiments have been carried out for the gold wire-to-gold thin film welding.