• 제목/요약/키워드: ultra sound

검색결과 92건 처리시간 0.034초

Novel Recycling Technology of Ultra-fine Fibrous Materials

  • Kim, Seong-Hun;Oh, Kyung-Wha;Lee, Shin-Kyung
    • 한국고분자학회:학술대회논문집
    • /
    • 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
    • /
    • pp.209-209
    • /
    • 2006
  • Ultra-fine fibers are spun by expensive fiber spinning technology using special spinnerets. Ultra-fine fibrous materials have attracted considerable attentions because of their potential applications as high performance wiping cloths, water absorbent sound proofing materials and moisture transfer sporting good. However, production expense of ultra-fine fibers is 5 to 7 times higher than general textile materials. The objective of this research is to develop cost-effective recycling process to produce multi-functional ultra-fine fibrous material in terms of the development of garnetting and carding machines for ultra-fine fibrous material waste and scrap. The efficiency of sound absorption for the recycled polyester nonwoven increased with decreasing length and thickness of component fibers, which was attributed to the reduction of air permeability. It is expected that high value and cost-effective textile products are developed using ultra-fine fibrous wastes and that sound proofing material and oil absorbent f

  • PDF

혈관 내부 진단용 원형 배열 초음파 트랜스듀서에 대한 연구 (A Study on an Ultrasonic Circular Array Transducer for Intra-vascular Ultra-sound Diagnosis)

  • 김희원;이수성;노용래
    • 한국음향학회지
    • /
    • 제22권4호
    • /
    • pp.329-336
    • /
    • 2003
  • 본 연구에서는 혈관 내부 조영용으로 사용될 수 있는 원형 배열 초음파 트랜스듀서를 설계하고 제작하였다. 트랜스듀서는 알루미나 튜브 위에 부착된 32개의 압전 소자와 전면 절연층, 고분자 후면층으로 구성된다. 우선 트랜스듀서의 방사특성 해석을 통해 원주방향으로 무지향성을 가지는 원형 배열 구조를 설계하였다. 압전소자로는 2-2형 압전복합재료를 채택하였다. 설계 결과에 따라 직경 3㎜의 원형 배열 트랜스듀서를 제작하고 그 음향특성을 측정하였으며, 측정 결과는 설계치와 잘 일치하였다. 실험적으로 확인된 무지향성은 본트랜스듀서의 IVUS (Intra-Vascular Ultra-Sound)센서로의 적용가능성을 확인시켜 주는 것이었다.

경피신경전기자극과 초음파가 전기생리학적 반응에 미치는 영향 (Effects on Electrophysiologic Responses to the Transcutaneous Electrical Nerve Stimulation and Ultra Sound)

  • 백수정;이미애;김진상;최진호
    • The Journal of Korean Physical Therapy
    • /
    • 제12권1호
    • /
    • pp.49-56
    • /
    • 2000
  • The purpose of this study was to investigate the influnce of afferent stimuli, transcutaneous electrical nerve stimulation and ultra sound, on the electrdiagnostic study of normal subjects. Electrodiagnostic study was performed before and after the application of afferent stimulation of the right popliteal fossa on 18 healthy female volunteers. After the transcutaneous electrical nerve stimulation, there is no significantly change of latencies and amplitudes of SEP, H-reflex, peroneal nerve F-wave, and sensory nerve conduction. After the ultra sound, there is no significantly change of latencies and amplitudes of SEP, H-reflex, peroneal nerve F-wave, and sensory nerve conduction. Tibial nope F-wave and motor nerve shows prolonged latency after TENS and US (p<0.01). Ultrasound may have a similar mechanism of action compared to transcutaneous electrical nerve stimulation by having localized inhibitory effects of the peripheral nerve. However, further investigation is needed to assess their mechanism of action and the precise relevance of stimulation modality.

  • PDF

Development of sound level meter provided with ultra-low SPL measuring function -Creation and evaluation of super-silent spaces-

  • Kawakami, Fukushi;Terazono, Shinichi;Lee, Ho-Gi
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2010년도 춘계학술대회 논문집
    • /
    • pp.760-761
    • /
    • 2010
  • As is widely known, SPL measurement using sound level meter (SLM) is limited to higher than 30 dBA, because of the self-noise n(x) of condenser microphone (CM). The authors confirmed n(x) is composed of 3 kinds, each of which is stable enough under the condition -20 ~ +50 deg C to eliminate the influence of n(x) by subtracting its energy from the squared input signal in the integration process, as well as to develop new type of SLM with ultra-low SPL measuring function. This is so-called "0-dB SLM" since it enables to measure SPL down to around 0 dB-SPL. The RMS of n(x) is acquired and stored in ROM in advance, by placing CM in the supersilent space or by using dummy microphone with equivalent capacitance before the actual measurements.

  • PDF

초음파를 이용한 저질판독 시스템에 관한 연구 (A Study on System of Subbottom Searched Using Ultra Sonic)

  • 김재갑;김원중;황두진
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2001년도 춘계종합학술대회
    • /
    • pp.383-387
    • /
    • 2001
  • 본 논문은 여러 형태의 해저 침전물인 뻘, 모래, 자갈, 패류 등을 초음파를 이용하여 구별하는 것인데, 이는 해저목표물에 대한 신호패턴 데이터베이스를 구축한 후, 기존 어군탐지기로부터 아날로그 신호를 디지털 신호로 변환하고, 이 신호를 컴퓨터에서 가공하여 정확한 목표물 인식이 가능하도록 하는 판독시스템을 개발하는 것이다. 지금까지 연구한 결과를 바탕으로 많은 실험을 거친 후(수조 및 현장 실험 등) 침전물의 데이터를 정밀 분석하면 해저목표물을 알아낼 수 있다. 수중에서 어종별로 어체에서 반사되는 초음파 특성과, 해저면에서 뻘과 딱딱한 패류 껍질, 모래 자판 등에서 반사되는 초음파 특성 등을 분석한 값을 데이터베이스화하여 저장해 두고, 실제 측정시 해저 목표물로부터 반사 되어오는 값과 비교하여 침전물과 어·패류의 서식 상태 현황을 파악하는데, 이런 어·패류 판독용 초음파 탐지기는 된 연구를 통하여 개발 할 수 있다. 중점적으로 추후 연구해야 할 분야는 초음파의 특성을 더욱더 세밀히 샘플링 하는 것과 초음파가 해저 목표물의 여러 형태에 따라 산란 특성을 가지고 있는데 이들에 대한 문제점을 연구하는 것이다.

  • PDF

초저전력 Micro Controller Unit(MCU)를 활용한 소리 주파수 분석기 개발 (Development of Sound Frequency Analyser using an Ultra-Low Power MCU)

  • 최재훈;정용주
    • 한국전자통신학회논문지
    • /
    • 제11권4호
    • /
    • pp.403-410
    • /
    • 2016
  • 금속으로 이루어진 물질의 경우에는 고유하며 명백한 공진 주파수를 가지고 있다. 이러한 성질을 이용하여, 공장에서 만들어진 제품의 품질 테스트를 실행할 수 있다. 해당 제품에 충격을 가하고 이로부터 발생되는 소리나 진동의 주파수를 고성능의 장비를 이용하여 측정하게 된다. 범용 컴퓨터나 DSP 기반의 단독 시스템들이 이를 위해서 사용되며 이러한 장비들은 들고 다니기에 크기가 너무 크고 구축비용이 많이 든다. 본 논문에서는 TI의 MSP430 계열의 MCU를 이용하여 개발된 시스템에 대하여 소개하고자 한다. 초저전력의 MSP430 MCU들은 큰 용량의 배터리가 필요 없으므로 매우 작은 크기의 주파수 분석기를 제작하는 것이 가능하게 한다. 제안된 시스템은 검사원이 쉽게 장비를 가지고 다닐 수 있어야 하고 정확도를 다소 희생하더라도 작은 개발비용이 요구되는 환경에 사용될 수 있을 것이다. 제안된 시스템은 론치패드를 이용하여 개발되었으며, 인위적이거나 자연스런 소리의 주파수를 매우 높은 정확도로 판별 할 수 있음을 확인할 수 있었다.

'Super Hi-Vision'-an ultra-high definition television-and its human factors

  • Sugawara, M.;Masaoka, K.;Emoto, M.;Nojiri, Y.;Okano, F.
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
    • /
    • pp.81-85
    • /
    • 2006
  • The ultra-high definition TV system nicknamed "Super Hi-Vision" is a television system with 4000-scanning-line video and 22.2 multichannel sound. NHK has been developing it with the aim of creating a broadcasting system conveying a strong sensation of presence. We believe that it is important to design the system by taking into account human factors such as human visual system characteristics. This paper describes the psychological and physiological experiments on the visual effects of "Super Hi-Vision".

  • PDF

소비자 청감을 고려한 초 저소음 냉장고 개발 (Development of the Ultra-Silence Refrigerator with Considering Consumer's Hearing)

  • 주재만;이제원;이진우;정정교;김용태
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2005년도 추계학술대회논문집
    • /
    • pp.435-438
    • /
    • 2005
  • Until now, a home appliance mostly has revealed physical quantities created by the standpoint of engineers, by using the A-weighted sound pressure level and the sound power. It is, however, obviously impossible to characterize a complex sound with a single number. Many parameters must be considered. In addition to loudness, we must take into account frequency and amplitude variation over time, spectral balance, tonality, and many other attributes. Thus, in this research, the general tendency of consumer psychology was investigated for the refrigerator's sound. The noise from the refrigerator was evaluated by not only the simple sound pressure levels but also the consumer's sense of hearing. And also, in order to improve the quality of sound through the design change, the consumer's evaluation was analysed and related to the engineering quantities. With the several design changes, finally the most silence refrigerator in the world was developed with considering the consumer's hearing of sense.

  • PDF

저압탕 고청정 대형 잉고트 제조 연구 (Study on the Fabrication of a Large Steel Ingot with the Ultra Clean and Low Hot Top Ratio)

  • 오상훈;이동희;김남수;남궁정
    • 한국소성가공학회:학술대회논문집
    • /
    • 한국소성가공학회 2009년도 춘계학술대회 논문집
    • /
    • pp.91-93
    • /
    • 2009
  • A large steel ingot needs to be larger and larger in size and an ultra high clean, no defect in quality with a low hot top ratio for the resent heavy industry. The demands are very difficult to achieve simultaneously because of their contradictive effect to each other in results. In this study, 30ton steel ingot was cast in a foundry with an optimized design parameter of cast mold and cast process conditions for the low hot top ratio, 12%. The cast ingot was analyzed in macro defect, segregations, and cleanness. No macro defect was founded in central surface of the ingot. The degree of segregation and cleanness are in the controlled range with a sound quality.

  • PDF