• 대한치과보철학회지
• /
• 제27권1호
• /
• pp.103-121
• /
• 1989

The purpose of this study was to investigate the influence of balancing interference on the activity of masticatory muscles and condylar path. Eight dental students of Won Kwang University without any symptoms of temporomandibular disorder and occlusal interferences, were selected for this study, The balancing interference was provided by construction and cementation of cast metal crowns on the upper and lower first molars. For the measurement of muscle activity, bioelectric processor (EM2, Myotronic Res., Inc., U.S.A.) was used and for the condular path, computerized electronic pantograph (Pantronics, Denar Corp., U.S.A.) was used and the myographic recordings were taken bilaterally from the anterior temporal, masseter and digastric muscles on rest position and on functions. These experimental procedures were done before cementation of experimental crown, three days after cementation of experimental crown, one week after, two weeks after and then one week after removal of experimental crown. The results are as follows: 1. The PRI score was increased at three days after application of balancing interference, and decreased at two weeks after. 2. Three subjects showed mild symptom of temporomandibular disorder at three or four days after application of interference, but the symptom was subsided in one or two weeks after application of interference. 3. One week after application of balancing interference, the activity of ipsilateral anterior temporal muscle in four subjects was decreased on gum chewing at experimental site. 4. Three days after application of balancing interference, the activity of ipsilateral anterior temporal muscle in three subjects was increased on gum chewing at non-experimental site. 5. The influence of balancing interference on the activity of anterior temporal, masseter and gigastric muscle was not prominent.

• 센서학회지
• /
• 제26권1호
• /
• pp.66-72
• /
• 2017

The three dimensional ultrasonic anemometer was constructed to reduce the disadvantages of the two-dimensional anemometer and to be free from the use environment. Three pairs of transmitting and receiving ultrasonic sensors were designed to face each other at an angle of $45^{\circ}$ to the upper and lower surfaces at intervals of $120^{\circ}$. 200 kHz ultrasonic sensor Oscillation, transmission and reception, level detection, power supply circuit were designed and U, V, W wind speed vector components were obtained by measuring the time of first received ultrasonic pulse by transmitting pulse ultrasound. It is implemented as firmware in ARM Coretex-M3 processor so that horizontal and vertical wind direction and wind speed can be converted into digital signal by vector calculation. In this study, The three-dimensional ultrasonic anemometer can complement the disadvantages of the two-dimensional anemometer (mechanical and ultrasonic), and it is expected to gradually replace the two-dimensional anemometer due to its high utilization rate by collecting additional information such as vertical wind.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 F
• /
• pp.2051-2053
• /
• 1998

In spite of nonlinear or step-changing load and line disturbances, the inverter for the UPS must provide the pure sinusoidal output voltage with low THD(Total Harmonics Distortion). This paper proposes an inverter controller for the UPS which has a good dynamic response characteristic and robustness for applying industrial world directly. The inverter output voltage is controlled instantaneously with a double regulation loop by a TMS320C31 Digital Signal Processor so that it has very good dynamic response for nonlinear or step-changing load and line disturbances. To improve the voltage utilization and response characteristics, the Space Vector Modulation(SVM) technique is adapted for the switching method of this system. The characteristics of the proposed control system were verified by simulations and experiments.

• 인지과학
• /
• 제12권1_2호
• /
• pp.65-76
• /
• 2001

이 연구는 하이퍼미디어 사용자의 정보처리 유형과 하이퍼미디어 정보탐색 패턴과의 관련성을 밝히기 위한 연구이다. 정보처리 유형은 Human Information Processing Styles(HIPS)로 측정되었다. 정보탐색 패턴의 세 가지 유형은(a) 정보탐색 폭에 관한 패턴(b) 정보탐색 경로에 대한 패턴, 그리고(c) 정보탐색 방법에 관한 패턴이다. 조사대상은 102명의 대학생들로 구성되었다. HIPS 결과에 따라 각각 34명의 학생들이 좌놔우위, 우뇌우위, 통합적뇌 정보터리자 집단에 선정되었다. 선정된 학생들은 하이퍼미디어를 활용한 정보탐색과제를 완성하기 위해 A.g.i.l.e Trainer$^{TM}$ 프로그램과 60분 정도 상호작용 하였다. 연구결과 하이퍼미디어 사용자의 정보처리 유형이 정보탐색 패턴에 커다란 영향을 주는 것으로 나타났다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 영호남학술대회 논문집
• /
• pp.74-77
• /
• 2000

A pulsed Nd:YAG laser has been used in a wide variety of fields : measuring, material processing and so on. In a material processing, it is very important to control the laser energy density. A pulse repetition rate and a pulse width are regarded as the most dominant factors to control the energy density of laser beam. In this study, pulsed Nd:YAG laser system was designed and manufactured to control the laser output usefully and easily. This system adopted the sequential charge and discharge circuit is controlled by 80196 micro- processor. As a result, it is found that laser output is controlled minutely by changing laser input and pulse repetition rate, and usefully by using 80196 microprocessor.

• 대한치과보철학회지
• /
• 제28권2호
• /
• pp.175-182
• /
• 1990

This study was performed to investigate the influence of occlusal change on the masticatory muscle activity. 8 students without any symptom of T.M.J. dysfunction, any history of prosthodontic or orthodontic treatment on dental college of WonKwang Univ. were participated in this study. The activity of masseter and anterior temporal muscles were measured by bioelectric processor(EM2, Myotronics, Inc., U.S.A.) during voluntary maximal clenching on natural teeth, by splint with bilateral posterior surface contact, by splint with unilateral posterior surface contact, and by splint without unilateral posterior teeth contact. The obtained results were as follows ; 1. The loss of posterior contact on noe side resulted in change of the activity of anterior temporal and masseter muscle during clenching on ipsilateral side, but there was no change of muscle activity on contralateral side. 2. The activity of anterior temporal and masseter muscle during clenching were not affected by the pattern of occlusal contact. 3. There were no difference between the activity of anterior temporal and masseter miuscle during clenching by natural teeth and by occlusal splint.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 추계학술대회 논문집 학회본부
• /
• pp.253-256
• /
• 1997

This paper describes a novel design method for compensating field time-constant of micro-synchronous machine so that its terminal flux can show the same characteristics as large-scale synchronous machine's. In addition to it, the suggested design method can determine the field time-constant regulator's parameters considered the nonlinearities of micro-synchronous machine such as saturation and loading effect. This method applied to 5kVA micro-synchronous machine, and the digital time-constant regulator with digital AVR were designed such that the short field time-constant, $T_{do}'=1.12\;sec$, can take on the large-scale synchronous machine time constant, $T_{do}'=1.47\;sec$. After determining the parameters of controllers, the real time digital time-constant regulator and digital AVR algorithm were implemented by using the PC with Penumum processor, and the usefulness of suggested real time digital time-constant regulator was verified by observing its good performance on the excitation of micro-synchronous machine.

• 한국통신학회논문지
• /
• 제29권6B호
• /
• pp.563-574
• /
• 2004

본 논문에서는 정적 네트워크 위상과 동적 위상을 결합한 새로운 부류의 MIN(Multistage Interconnection Network)인 Combine MIN을 제안한다. Combine MIN은 단일 경로 성질을 갖는 MIN보다도 적은 하드웨어 비용을 가지면서도 다중 경로를 제공한다. 또한 Combine MIN은 빈번한 통신을 갖는 프로세서-메모리에 짧은 경로의 지름길 경로 및 다중 경로를 제공함으로써 지역화된 통신에 적합하게 구성할 수 있게 설계되었다. 성능 평가를 위한 시뮬레이션 결과에 따르면 Combine MIN은 높은 지역화된 통신에서 같은 네트워크 크기를 갖는 기존의 MIN보다 우수한 성능을 보였다. 따라서 Combine MIN은 공유 메모리 다중 프로세서 시스템에서 지역화된 통신구조를 갖는 병렬 응용 분야에서 효율적으로 활용될 수 있을 것이다.

• KIEE International Transactions on Power Engineering
• /
• 제4A권3호
• /
• pp.129-133
• /
• 2004

This paper deals with the design and implementation of a TCSC (Thyristor Controlled Series Capacitor) simulator, which is a module for an analog type power system simulator. Principally, it presents configuration of controller hardware/software and its experimental results. An analog type power system simulator consists of numerous power system components, such as various types of generator models, scale-downed transmission line modules, transformer models, switches and FACTS (Flexible AC Transmission System) devices. It has been utilized for the verification of the control algorithm and the study of system characteristics analysis. This TCSC simulator is designed for 50% line compensation rate and considered for damping resister characteristic analysis. Its power rate is three phase 380V 20kVA. For hardware extendibility, its controller is designed with VMEBUS and its main CPU is TMS320C32 DSP (Digital Signal Processor). For real time control and communications, its controller is applied to the RTOS (Real Time Operation System) for multi-tasking. This RTOS is uC/OS-II. The experimental results of capacitive mode and inductive mode operations verify the fundamental operations of the TCSC.

• Journal of Oral Medicine and Pain
• /
• 제17권1호
• /
• pp.61-71
• /
• 1992

52 Dental students without masticatory problems were selected for this study. They were trained on several mandibular position and mandibular movement exercise, that is, rest position, light bite, tapping, hinge opening, habitual opening, opening limitation, stretch exercise, resistance exercise and clenching. The objectives of this study was to investigate the effects of mandibular movement exercise, especially stretch and resistance, on the experimentally guided limited mouth opening. Muscle activity of the anterior temporalis and the masseter on above mentioned position or exercise were recorded with bioelectric processor EM2(Myotronics, U.S.A.) and the data were processed with SPSS. The obtained results were as follows : 1. Activity of the muscles at rest position were decreased with mandibular movement exercise. 2. Forceful mouth opening on opening limitation increased muscle activity greatly, especially of the masseter. 3. On opening limitation, stretch or resistance exercise was very efficient for decrease of muscle activities. 4. There were no difference of muscle activity between on hinge opening and on habitual opening. Therefore, for muscle relaxation, the two movement exercise can be used interchangeably.