• 한국포장학회지
• /
• 제23권1호
• /
• pp.37-45
• /
• 2017

닭가슴살의 품질변화를 실시간으로 모니터링하기 위하여 pH 지시약, AA, 다공성 기재인 $Tyvek^{(R)}$을 이용하여 신선도 인디케이터를 제조하였다. 닭가슴살의 대표적인 지표물질은 TVBN과 $CO_2$이며, 이는 저장기간에 따라 미생물의 증식과 단백질 분해를 통해 증가한다. 닭가슴살 저장실험 결과 미생물 수로 판단한 초기부패단계의 $CO_2$ 농도와 TVBN 발생량은 각각 19%와 23 mg%로 확인되었다. 지표물질 발생량 데이터를 토대로 BCG 및 AA의 농도별 인디케이터를 제조하여 인디케이터 색변화 시뮬레이션을 실시하였다. 그 결과, AA의 함량에 따른 인디케이터의 색변화구간 조절 가능성이 확인되었으며, 제조한 인디케이터 중 "G0.12_A0.5"의 인디케이터가 닭가슴살 초기 부패판정 농도인 TMA 20 mg%에서 육안으로 확인할 수 있는 뚜렷한 색변화를 보였다. 시뮬레이션을 통해 선정된 최적 조성의 인디케이터를 닭가슴살 포장내부에 부착하였으며, $4^{\circ}C$와 $10^{\circ}C$에서 8일동안 닭가슴살의 이화학적 변화와 그에 따른 인디케이터의 색변화를 관찰하였다. 그 결과, TCD 값을 통해 판단된 인디케이터의 색변화 발생일이 각 온도별 닭가슴살 초기부패판정일과 잘 부합하였으며, 이를 통해 시뮬레이션의 신뢰성을 확보할 수 있는 것으로 확인되었다. 본 연구 결과는 저장 중 닭가슴살의 품질변화를 제조한 인디케이터의 포장 내 부착을 통하여 감지하고 실시간 신선도 판단이 가능할 것으로 사료된다.

• 한국포장학회지
• /
• 제27권1호
• /
• pp.35-40
• /
• 2021

Calcium hydroxide (CH) reacts with CO2 to produce moisture, and sodium carbonate (SC) reacts with CO2 in the presence of moisture. Using these different characteristics of these two reactants, a CH/SC mixture of CO2 absorber tuned for kimchi ripening to produce CO2 in a flexible package was selected. A ratio of CH:SC (1:2) in highly gas permeable microporous spunbonded film (Tyvek) sachet was found to be appropriate for delayed and consistent CO2 absorption useful for kimchi package. Addition of superabsorbent polymer (SAP) as moisture buffer was helpful for boosting the consistency of CO2 absorption. In a package of 0.5 kg kimchi at 10℃, the sachet consisting of 0.794 g of CH + 2.276 g of SC + 0.4 g of SAP suppressed its volume expansion and maintained a suitable range of CO2 partial pressure (PCO2) steadily inside. These optimal conditions may vary depending on the type and salinity of kimchi, storage and distribution temperature, and the material and area of the absorber sachet. This study showed a potential of mixture CO2 absorber to be tuned for CO2 producing packaged kimchi for the purpose of keeping consistent PCO2 at tolerable volume expansion.

• 한국태양에너지학회 논문집
• /
• 제38권6호
• /
• pp.51-63
• /
• 2018

Nowadays the bifacial PV system market and its applications are increasing rapidly. The performance of the bifacial PV system take advantage of its rear surface irradiance. Also, the ground albedo, PV module tilt and azimuth, PV module installation height, shading effect and module temperature are factors of bifacial PV system performance. This paper investigates how the performance of bifacial PV system is influenced by above factors. First, we analyzed the energy yield depending on PV module installation by simulation. Secondly, we compare energy performance evaluation of monofacial and bifacial module on different weather condition by experiment. Thirdly, we tested the albedo effect and checked operating characteristics using Dupont Tyvek material for the bifacial PV module. Fourthly, we check the shading effect of bifacial PV module on bypass diode operating. Finally, we applied the bifacial PV module in the nearby subway station for the noise reduction barrier using a qualified simulation program. In summary, we confirm that the energy performance superiority of the bifacial PV module has a lot of application use including road. Also, we have confirmed the bifacial module and inverter design should be considered by rear surface irradiance.

• 한국의류학회지
• /
• 제20권2호
• /
• pp.350-361
• /
• 1996

The objectives of this study mere 1) to investigate whether the different nonwoven fabric types influenced on the objective and subjective wear performances of the experimental pesticide protective pants, 2) to detect whether the different finishes treated to the nonwoven fabrics influenced on the objective and subjective wear performances of the experimental pants, and 3) to detect the relationships between objective wear performances and subjective wear sensation. Three types of nonwoven fabrics (T (Tyvek$\textregistered$), 5 (Sontara$\textregistered$) and K (Kimlon$\textregistered$)) were used as test specimens. By pad-dry.cure method, each of the specimen was treated with fluorocarbon compound for water-oil repellent finish (Tw, Sw, Kw). And each of specimen was treated with organic silicon quarternary ammonium salts and then treated with fluorocabon compound for dual functional finish (76, 50, Kd). Using the three water-oil repellent finished fabrics and the three dual functional finished fabrics, six experimental protective pants (Cl (Tw), C2 (Sw), C3 (Kw), C4 (76), C5 (56), C6 (Kd)) were made according to the same pattern suggested by the Rual Guidance Office. The wear trials of experimental pesticide protective pants were performed in a conditioned vinyl plastic hothouse ($30\pm1^{\circ}C$, $70\pm5%$R.H., 0.25m/sec air velocity). The measurements of skin temperature, microclimate temperature and humidity on the subjects were obtained by the themohygromenter. The subjective wear sensations were measured using previously developed thermal, humidity and overall comfort scales. The results obtained from this study were as follows: 1) There were siginificant differences among nonwoven fabric types on the objective and subjective wear performances, therefore, the skin temperature, microclimate temperature and humidity of subjects who wore the experimental pants made with Sontara were siginificantly lower than those who wore the others. And, the experimental pants made with Sontara were assessed as more comfortable than the others in terms of the subjective thermal, humidity and overall wear sensations. 2) There were no significant differences between two finish types on the objective and subjective wear Performances. 3) The microclimate humidity on the thigh was highly correlated with the overall subjective comfort sensations and the next highly correlated one was the mean skin temperature. That is, the higher the microclimate humidity and the mean skin temperature, the higher the overall subjective comfort sensation ratings which mean the overall subjective sensation was very uncomfortable.