• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.122-122
• /
• 2020

Urban flood simulation plays a vital role in national flood early warning, prevention and mitigation. In recent studies on 2-dimensional flood modeling, the integrated run-off inundation model is gaining grounds due to its ability to perform in greater computational efficiency. The adaptive quadtree shallow water numerical technique used in this model implements the adaptive mesh refinement (AMR) in this simulation, a procedure in which the grid resolution is refined automatically following the flood flow. The method discounts the necessity to create a whole domain mesh over a complex catchment area, which is one of the most time-consuming steps in flood simulation. This research applies the dynamic grid refinement method in simulating the recent extreme flood events in Metro Manila, Philippines. The rainfall events utilized were during Typhoon Ketsana 2009, and Southwest monsoon surges in 2012 and 2013. In order to much more visualize the urban flooding that incorporates the flow within buildings and high-elevation areas, Digital Surface Model (DSM) resolution of 5m was used in representing the ground elevation. Results were calibrated through the flood point validation data and compared to the present flood hazard maps used for policy making by the national government agency. The accuracy and efficiency of the method provides a strong front in making it commendable to use for early warning and flood inundation analysis for future similar flood events.

• Proceedings of the KSRS Conference
• /
• v.1
• /
• pp.166-169
• /
• 2006

Our country's coast is vulnerable area to natural disaster which the repetitive damages occur every year including a loss of lives, the damage of facilities and erosion mostly except for the east coast because of a typhoon, tidal waves, sea water overflowing by topographic structure of low-lying gentle slope and shallow sea. However, as for prevention of natural disaster occurring every year, the situation is that it's centered on the restorationcentered measures and the general disaster prevention research to minimize damages at the time of disaster occurrence is insufficient. This study intendedlop t to devehe techniques possible for real time sampling of damage prediction areas on Web in order to support decision making for damage prevention and establishment of disaster prevention policy. For this, the thematic map was produced related to disaster based on high-resolution satellite picture, and the environmental DB similar to real world was constructed through topographic construction of three-dimension integrating the parts of land and the sea. In addition, the system was developed possible for the expression of damageable regions by real time grasp of dangerous regions at the time of disaster occurrence through over flowing simulation of three-dimension, and it's intended to prepare a basis to minimize damages to disaster situations through it.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.26 no.2
• /
• pp.75-81
• /
• 2021

This study analyzes the resonance characteristics caused by the mutual interference between LCL filters and the grid impedance under the parallel operation of the grid-connected inverter using the LCL filter. These characteristics are verified through simulation and experiment. Two inverters are used to connect to the grid in parallel, and the system parameters, including the LCL filter, are set to the same conditions. In the case of inverters running in parallel at the point of common coupling, the presence of grid impedance causes mutual interference between the LCL filters of each inverter, and the deviation of the filter resonance frequency is analyzed to understand the parallel inverter. The correlation between the number of devices and the size of grid impedance is simulated by PSIM and verified by MATLAB. By connecting the real-time digital simulator Typhoon HILS to the DSP 28377 control board, the mutual interference characteristics are tested under the condition of two inverters running in parallel. The experimental and analysis results are the same, indicating the validity of the analysis.

• Journal of Environmental Science International
• /
• v.18 no.9
• /
• pp.1035-1043
• /
• 2009

High turbid water in the River has been one of the major concerns to the downstream residence. Especially in the Nakdong River basin severe turbid water problem occurred in year 2002 and 2003 due to the typhoon Rusa and Maemi consecutively. The main objective of this study is to develop turbid water management system in reservoir downstream of the Nakdong River combining physically based semi-distributed hydrologic simulation model SWAT with 1-dimensional dynamic water quality simulation model. SWAT model covers the area from the upstream of the Imha and Andong reservoir to the Gumi gage station for the purpose of estimating flow rates and suspended sediment of the tributaries. From year 1999 to 2007 runoff simulation for 8 years $R_{eff}$ and $R^2$ ranges $0.46{\sim}0.9$, $0.54{\sim}0.99$ respectively. Through the linkage of models, outputs of SWAT model such as suspended sediment and flow rates of the tributaries can be incorporated into the 1-dimensional dynamic water quality simulation model, KoRiv1 to support joint reservoir operation considering the turbidity released from Imha and Andong reservoir. The applicability of model simulation has been tested for year 2006 and compared with measured data.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.11a
• /
• pp.211-218
• /
• 2004

The WAM wave model has been widely used for wave hindcasting in the ocean by many domestic and foreign researchers due to its relative simplicity and high accuracy. As this model was originally developed for the condition cf deepwater and comparatively coarse grid size covering wide area, it might produce in a fault result mused by the improper distribution of directional spreading. We extensively investigated involved problems based on WAM Cycle 4 model and suggested the improved WAM model so that it is applicable to both shallow water sea and fine mesh wave simulation. The modified WAM model is verified here by comparing the computed result with and the observed data at Ieodo Ocean Research Station for September of 2003.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.8 no.4
• /
• pp.155-164
• /
• 2005

The coast has been known as very vulnerable area. This area has nature disasters such as typhoon, tidal wave, flood and storm almost every year. In this study, coast vulnerable area information management system was developed to manage the coastal facilities and vulnerable area through Web GIS. This system is able to visualize the damage area and support the official work related to coast as efficient DSS(Decision Supporting System). Moreover, the foundation for domestic coast information management is expected by acquiring less cost and time. For this, GIS DB was first constructed by acquiring damage factor data such as typhoon, tidal wave, flood and storm. Then GIS analysis methods and high resolution satellite images are used to possibly present the results of retrieve as table, map, graph, inundation simulation in real time.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.18 no.4
• /
• pp.348-359
• /
• 2006

The city of Mokpo suffers lowland inundation damages by sea water flooding even without harsh weather like a typhoon, due to the low level urban infrastructure facilities, oceanic environmental changes by constructions of seadike/seawall and sea level rise caused by global warming. This study performs constructing the simulation system which employs the MIKE21 software. And the system is applied to several typhoon- induced surges which had resulted in inundation at Mokpo. Virtual situation of flooding is simulated in case 59 cm of surge height, which had been occurred actually by RUSA(0215), coincides with Approx. H.H.W. Then the water level of 545 cm corresponds to the extreme high water level(544 cm) for 10 year return period after the construction of Geumho seawall. The results show rapid and broad inundation at Inner-Port, requiring additional preparations for flood protections.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.26 no.6
• /
• pp.388-396
• /
• 2014

In this study, numerical simulations are conducted for the inundations due to storm surge and rainfall at Masan City of Korea where severe damages occurred by the typhoon Maemi. A coupled numerical model which can deal with various flow patterns such as storm surge, rainfall and sewer flows is employed. The numerical results show that the inundation area and depth increase significantly when the combined effects of storm surge and rainfall are considered in comparison with those obtained without a rainfall effect. Further numerical simulations are conducted to evaluate the performance of the sea wall being constructed for the coastal defence. The results show that the maximum inundation depths decrease when the sea wall is constructed. However, the duration of inundation becomes longer, because the rainwater on the ground cannot be discharged easily to the sea due to the presence of the sea wall.

• Journal of Korea Water Resources Association
• /
• v.45 no.11
• /
• pp.1093-1105
• /
• 2012

In this study, the simulations and analyses of flood flow due to a river inundation in a coastal urban area are carried out using a two-dimensional finite volume model with well-balanced HLLC scheme. The target area is a coastal urban area around Gohyun river which is located at Geoje city in Kyungnam province and was extremely damaged due to the heavy rainfall during the period of the typhoon "Maemi" in September 2003. For the purpose of the verification of the numerical model applied in this study, the simulated results are compared and analyzed with the inundation traces. In addition, the flood flow in an urban area is simulated and analyzed according to the scenarios of inflow variation due to the increase and decrease of the intensity of the heavy rainfall, which.

• Journal of Navigation and Port Research
• /
• v.28 no.6
• /
• pp.557-564
• /
• 2004

The WAM wave model has been widely used for wave hindcasting in the ocean by many domestic and foreign researchers due to its relative simplicity and high accuracy. As this model was originally developed for the condition of deepwater and comparatively coarse grid size covering wide area, it might produce in a fault result caused by the improper distribution of directional spreading. We extensively investigated involved problems based on WAM Cycle 4 model and suggested the improved WAM model so that it is applicable to both shallow water sea and fine mesh wave simulation The modified W AM model is verified here by comparing the computed result with and the observed data at Ieodo Ocean Research Station for September of 2003.