• Journal of Korean Society of Forest Science
• /
• v.110 no.4
• /
• pp.577-589
• /
• 2021

Soil seed bank community contributes to the long-term conservation of plant diversity and vegetation dynamics, and their decreasing diversity and density with soil depth provide critical perspectives (deterministic and stochastic) for understanding the community disassembly process. We analyzed changes in species composition and diversity and structuring patterns by soil layer (top and bottom), including surface vegetation, in Gwangneung Forest, a mature forest with a vegetation climate in the temperate central part of the Korean Peninsula. From two layers of soil collected with a vertical difference of 10 cm, 934 specimens of 27 families, 40 genera, 44 species, three varieties, and 47 taxa, germinated. Although species diversity and germination density decreased in most comparative characteristics, including growth type, there was no statistical significance due to large deviations. Within-group variability of species composition was similar in the upper and lower soils, as was the decline pattern in co-occurred species (ζ-diversity) and change in species retention probability. The structuring process of the community composition in the two soil layers was fitted with an exponential correlation rather than a power function, demonstrating the dominance of the stochastic process. The pattern in diversity and species turnover according to soil depth in Gwangneung Forest was discovered to be structured by stochastic random events, such as seed vertical movement rather than interaction with trait characteristics.

• Journal of the Korea Convergence Society
• /
• v.12 no.12
• /
• pp.145-151
• /
• 2021

This study aimed to investigate the efficient conduct of HA coating on Ti Gr4 for the practical use of medical device. Ti Gr4 alloy specimens measuring 𝜱 25mm × 1mm were sprayed with hydroxyapatite using thermal spray according to ASTM F1185-88. The surface was evaluated at #120, #400, #1,000 sandpaper and barrel finishing. Each coating properties was analyzed using SEM, UTS 20,000psi cap. and in vitro cytotoxicity. Surface morphology consists of well molten particles with very little resolidified or unmolten areas. The average Ca/P ratio is 1.74 which is in good agreement with theoretical value of 1.67. The average roughness Ra is very representative of roughness of specimen. The coatings are dense and well adhered to the substrate. The average bond strength was 61.74 MPa with a standard deviation of 4.06 which indicates fairly reliable results for ASTM 633 type tests. Variations in results from jig design, epoxy used, crosshead speeds etc. in vitro cytotoxicity result had a Grade 3. The results of the study are expected to be helpful in osseointegration and plasma-spray HA coated Ti Gr4 are more satisfactory in HA coating thickness elevation which is preferable to any other system.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.6
• /
• pp.226-234
• /
• 2021

The objective of this study is to establish the fundamental design data for axial load-displacement relationship under axial monotonic or cyclic responses of seismic damping·isolation (SDI) units developed for ceiling structures. The main parameters include the installation of a spring, the number of rubber layer, prestress stress of bolts for connector between the spring and rubbers, and loading type. Test results showed that SDI units with a spring in the core and higher prestress stress of bolts tended to be higher stiffness at the ascending branch and more ductile behavior at the descending branch. This trends more notable for the specimens under monotonic load rather than cyclic loads. Consequently, the energy dissipation of SDI unit can be optimally designed with the following conditions: installation of a spring within 3-layer rubbers and prestress applied to the bolts at 10% of their yielding strength . When compared with the experimental tension capacity of the developed SDI units, the predictions by JIS B 2704-1 and KDS 31 00 are conservative under monotonic loading but higher by approximately 10% under cyclic loading.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.24 no.2
• /
• pp.83-93
• /
• 1988

Recent Experimental results show that the J integral can be effectively used to obtain a valid parameter for predicting plane strain and plane stress fracture. However, only a few research results have been reported for the effect of thickness where the plane strain state can not be assumed. A purpose of this study is to find the behavior of fracture touhness and tearing modulus varing the specimen thickness. The type of specimen in the present study is compact tension (CT). The thicknesses of the low carbon steel specimens that are used in the experiments are 5, 10, 15, 20 and 25mm. The measurement of crack length is taken by optical measurements method. From the study, the followings are found; 1) The fracture toughness and the tearing modulus which are obtained by using Yoon's and Simpson's formula show more conservative than that by using Rice's and Merkel's. 2) The fracture toughness is increase in specimen thickness which is reached 15mm. Beyond this thickness the fracture toughness is decreased in specimen thickness. 3) In the case of CT specimen with the thickness ranging from 5 to 25mm, the tearing modulus which is applied the same J integral equation is almost constant. 4) By using Yoon's formula, the correlation of the plane slress fracture toughness J sub(C) with specimen thickness B is expressed as the following formula. J sub(C)/J sub(IC)=1.7-15.1(B/W)+112.9(B/W) super(2) -301.3(B/W) super(3) +260.6(B/W) super(4)

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.41
• /
• pp.47.1-47.10
• /
• 2019

Background: Hyaluronic acid (HA) has been applied as a primary biomaterial for temporary soft tissue augmentation and as a carrier for cells and the delivery of growth factors to promote tissue regeneration. Although HA derivatives are the most versatile soft tissue fillers on the market, they are resorbed early, within 3 to 12 months. To overcome their short duration, they can be combined with cells or growth factors. The purpose of this study was to investigate the stimulating effects of human fibroblasts and basic fibroblast growth factors (bFGF) on collagen synthesis during soft tissue augmentation by HA hydrogels and to compare these with the effects of a commercial HA derivative (Restylane^®). Methods: The hydrogel group included four conditions. The first condition consisted of hydrogel (H) alone as a negative control, and the other three conditions were bFGF-containing hydrogel (HB), human fibroblast-containing hydrogel (HF), and human fibroblast/bFGF-containing hydrogel (HBF). In the Restylane^® group (HGF), the hydrogel was replaced with Restylane^® (R, RB, RF, RBF). The gels were implanted subdermally into the back of each nude mouse at four separate sites. Twelve nude mice were used for the hydrogel (n = 6) and Restylane^® groups (n = 6). The specimens were harvested 8 weeks after implantation and assessed histomorphometrically, and collagen synthesis was evaluated by RT-PCR. Results: The hydrogel group showed good biocompatibility with the surrounding tissues and stimulated the formation of a fibrous matrix. HBF and HF showed significantly higher soft tissue synthesis compared to H (p < 0.05), and human collagen type I was well expressed in HB, HF, and HBF; HBF showed the strongest expression. The Restylane^® filler was surrounded by a fibrous capsule without any soft tissue infiltration from the neighboring tissue, and collagen synthesis within the Restylane^® filler could not be observed, even though no inflammatory reactions were observed. Conclusion: This study revealed that HA-based hydrogel alone or hydrogel combined with fibroblasts and/or bFGF can be effectively used for soft tissue augmentation.

• Journal of the Korea Concrete Institute
• /
• v.28 no.1
• /
• pp.3-11
• /
• 2016

The concern about hollow core PC slab has been increased to improve the workability during a construction of building by reducing self weight of structural members. In this manner, recently, TRS (Tripple Ribs Slab) was developed as a new type of half PC slab system. TRS member consists of the triple webs and the bottom flange prestressed by strands. The slab system is completed by casting of topping concrete on the TRS after filling styrofoam between the webs. This paper, presents a flexural experiment to investigate the flexural capacity of the TRS. Five full scale TRS members were made and tested under simple support condition to be failed by flexure and their strength was evaluated by code equations; the variables in the test are the depth and the presence of topping or raised spot formed when slip-forming. In addition, a nonlinear sectional analysis was performed for the specimens and the result was compared with the test results. From the study, it was found that the TRS has enough flexural strength and ductility to resist the design loads and its strength can be suitably predicted by using code equations. The raised spot did not affect the strength so that the spot need not to be removed by doing additional work. For the more accurate prediction of TRS's flexural behavior by using nonlinear sectional analysis, it is recommended to consider the concrete's brittle property due to slip-forming process in the modeling.

• Geotechnical Engineering
• /
• v.14 no.5
• /
• pp.205-218
• /
• 1998

The purpose of this study is to develop and utilize new assessment of liquefaction potential based on DSC(disturbed state concept) and dissipated energy concept. The term liquefaction has suddenly loses its shear strength and behaves like a fluid. Liquefaction has been a source of a major damage during severe earthquake. In this study, the cyclic undrained behavior of Joomoonjin strand is investigated by using an automates triaxial testing device(C. K. Chan type). In order to assess liquefaction potential of saturated strand, DSC method and energy method are applied for the experimental data. The use of DSC method and energy method to define the liquefaction potential is verified through laboratory testis of cyclic triaxial test on saturated sand specimens. Based on the analytical results of DSC method, the relationship between the factor affecting liquefaction characteristics(Dr) and physical properties of the saturated santa(fs and D.) is found. Based on the analytical results of energy method, it is found that the initial liquefaction of rand is related to the significant change in the dissipated energy. Finally, it is shown that the DSC method and energy method can capture the liquefaction mechanism.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.6
• /
• pp.1117-1123
• /
• 2016

Roller-Compacted Concrete Pavement (RCCP) is a type of pavement that shares conventional concrete pavement material characteristics and asphalt pavement construction characteristics. Even though RCCP is compacted in the same way and have similar aggregate gradation to asphalt pavements, its materials and structural performance properties are similar to those of conventional concrete pavement. With cement hydration and aggregate interlock, Roller-Compacted Concrete or RCC can provide strength properties equal to those of conventional concrete with low cement content. Therefore, compaction ratio of RCC can highly influence on its strength. In general, 95% of compaction ratio is required for proper strength development. RCC strength can be highly influenced by compaction energy which depends on compaction equipment and compaction method. Therefore, it is necessary to analyze the relationship between compressive strength and compaction ratio of RCC. RCCP specimens were produced at different compaction ratio by using different compaction methods and energies. The compaction ratio was defined by the ratio of the specimen's dry density and its maximum dry density. The maximum dry density was obtained from Modified Proctor test. 28 days compressive strength corresponding to each compaction ratio case was tested. Finally, the relationship between compressive strength and compaction ratio can be analyzed. For application of roller-compacted concrete in domestic construction site, the relationship is important for field compaction management.

• Korean Journal of Plant Resources
• /
• v.33 no.2
• /
• pp.130-137
• /
• 2020

We found Diplachne fusca subsp. uninervia (J. Presl) P.M. Peterson & N. Snow, an unrecorded alien plant, in Gimpo-si, Gyeonggi-do and Ganghwa-gun, Incheon Metropolitan City. Diplachne fusca subsp. uninervia is native to North America (the USA and Mexico), Central America (Belize, Costa Rica, Honduras, and Nicaragua), the Caribbean (the Bahamas, Cuba, Jamaica, and Puerto Rico), and South America (Venezuela, Brazil, Bolivia, Ecuador, Peru, Argentina, Chile, Paraguay, and Uruguay). It is reported as an invasive species worldwide. Diplachne fusca subsp. uninervia is closely related to D. fusca subsp. fascicularis (Lam.) P.M. Peterson & N. Snow (Gaet-deu-reong-sae in Korean), an invasive species in Korea, and both are infraspecific taxa of the species D. fusca. Diplachne fusca subsp. uninervia is distinguished from D. fusca subsp. fascicularis by the small size of its spikelets, glumes, and lemmas, with apex awnless. Its common name is "Jom-gaet-deu-reong-sae" based on the short spikelets. We found that D. fusca (≡Leptochloa fusca), previously known as "Gaet-deu-reong-sae", was misapplied. It is morphologically different from D. fusca subsp. fascicularis. Therefore, we changed the scientific name of Gaet-deu-reong-sae from D. fusca (≡L. fusca) to D. fusca subsp. fascicularis based on the type specimens, original descriptions, and recent studies.

• Journal of Gastric Cancer
• /
• v.5 no.3 s.19
• /
• pp.180-185
• /
• 2005

Purpose: Among tumor-associated antigens, MAGE (melanoma antigen) was named as cancer/testis specific antigens because they are detected exclusively in the testis or cancer cells, including gastric carcinomas. Due to the elicitation of autoimmunitiy to tumors by these antigens either in vitro or in vivo and their tumor specificity, these antigens, thus, appear to be potential targets for tumor-specific immunotherapy. Materials and Methods: The fresh tumor tissue and normal gastric tissue samples were obtained from resected surgical specimens in 53 patients with gastric carcinomas. From the obtained cells, total cellular mRNA was extracted, and RT-PCR and nested PCR were run in 30 and 35 cycles respectively, with two different kinds of primers specially designed to detect six subtypes of MAGE DNA simultaneously. Results: In the 53 normal tissue, there was no expression of MAGE, but in the 53 cancer tissues, MAGE was expressed in 13 tissues (24.5%). Our data did not exhibit any correlation with the expression of the MAGE gene and clinicopathological factors. Conclusion: In our data, since 24.5% of gastric cancer tissues expressed MAGE, it should become possible to immunize a significant proportion of patients with advanced gastric carcinomas against the antigens encoded by these genes, provided that more antigenic peptides encoded by the genes of the MAGE family can be identified in the near future. (J Korean Gastric Cancer Assoc 2005;5:180-185)