• Tuberculosis and Respiratory Diseases
• /
• v.50 no.5
• /
• pp.557-567
• /
• 2001

Background : Tumor angiogenesis is required for tumor growth and metastasis. In this study, we investigated the correlation between the intensity of angiogenesis and stage, nodal status, histologic type, metastasis and survival rate of non-small cell lung cancer. Method : Formalin fixed, paraffin embedded surgical specimens of 45 patients who had surgically resected primary non-small cell lung cancers without pre or post operative adjuvant chemotherapy or radiotherapy were examined. The microvessel count(MVC) was demonstrated by immunohistochemical staining for CD31(platelet endothelial cell adhesion molecule, PECAM). Results : Microvessel counts(MVCs) in stage IIIA and IIIB were higher than in stage I and II(p<0.05). The MVC in patients with lymph node metastasis was higher than that in patients without lymph node metastasis, although the difference was not statistically significant(p>0.05). However, in adenocarcinoma, the MVC in patients with lymph node metastasis was significantly higher than that seen in patients without lymph node metastasis(p<0.05). The MVC in adenocarcinoma was higher than that in squamous cell carcinoma(p<0.05). The difference between the MVCs of adenocarcinoma and squamous cell carcinoma was not statistically significant in stage I and II or N0 stage(p>0.05). However, in stage IIIA and IIIB or N1~3 stage, the MVC in adenocarcinoma was higher than that in squamous cell carcinoma(p<0.05). MVC was more increased when metastasis developed within 12 months. In the same histologic type and stage, the duration of survival time in patients with high MVC was shorter than in patients with low MVC, however the difference was not statistically significant(p>0.05). The survival rate in patients with high MVCs was lower than that in patients with low MVCs(P<0.05). Conclusion : In non-small cell lung cancer, MVC correlated relatively well with pathologic stage, nodal status(limited in patients with adenocarcinoma), histologic type, postoperative metastasis and survival rate. However, in the same histologic type and stage, MVC was not significantly related to the duration of survival. Therefore the assessment of the intensity of angiogenesis in non-small cell lung cancer may be helpful in predicting prognosis and in selecting patients for systemic adjuvant therapy of potential metastasis according to the results.

• Korean Journal of Plant Taxonomy
• /
• v.31 no.3
• /
• pp.267-282
• /
• 2001

To examine the leaf epidermal microstructure of three genera (Scopolia s.s., Anisodus, AtroPanthe, including Przewalskia as an outgroup) in the genera Scopolia Jacq. s.l., leaves of 10 species (37 specimens) were investigated by the light microscopy (LM) and scanning electron microscopy (SEM). The stomata of studied taxa were 'amphistomatic type' and the size (guard cell) range was $18-64{\times}11-48{\mu}m$. The size of stomata is slightly differed from between the taxa; the smallest size of stomata were found in the monotypic genus, Przewalskia ($24-27{\times}16-17{\mu}m$), on the other hand the largest one was found in Anisodus carniolicoides ($62-64{\times}43-48{\mu}m$). The stomatal complex was mostly anomocytic (in Scopolia s.s., Anisodus taxa : A. luridus, A. carniolicoides, A. acutangulus) and sometimes anisocytic (in Anisodus tanguticus, Przewalskia, Atropanthe). The stomata is mostly crescent in shape, but rarely circular, especially in Przewalskia tangutica. The shapes of epidermal cells are similar in both adaxial and abaxial sides, and mostly undulate/sinuate polygonal anticlinal wall, but rarely arched in Przewalskia tangutica. The epicuticular wax was not well developed in most studied taxa, except Anisodus tanguticus which is well developed cuticular striae around the stomatal complex. The elongate-headed glandular trichomes were found in Scopolia s.s. and Przewalskia. While the taxa of Anisodus and Atropanthe have not any trichomes (i. e., glabrous), except Anisodus luridus, which has simple or sometimes branched (dendritic- type) non-glandular trichome. Finally, the systematic and ecological significance of the leaf micromorphological features (stomata complex, trichome, etc.) in identification and elucidation of Scopolia s.l. including Przewalskia, especially between or within the genera including among the species is also discussed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.1 no.1
• /
• pp.53-68
• /
• 1981

Most clays under sustained load exhibit time-dependent deformation because of creep movement of soil particles and many investigators have attempted to relate their findings to the creep behavior of natural ground and to the long-term stability of slopes. Since the creep behavior of clays may assume a variety of forms depending on such factors as soil plasticity, activity and water content, it is difficult and complicated to analyse the creep behavior of clays. Rheological models composed of linear springs in combination with linear or nonlinear dashpots and sliders, are generally used for the mathematical description of the time-dependent behavior of soils. Most rheological models, however, have been proposed to simulate the behavior of secondary compression for saturated clays and few definitive data exist that can evaluate the behavior of non-saturated clays under the action of sustained stress. The clays change gradually from a solid state through plastic state to a liquid state with increasing water content, therefore, the rheological models also change. On the other hand, creep is time-dependent, and also the effect of thixotropy is time-function. Consequently, there may be certain correlations between creep behavior and the effects of thixotropy in compacted clays. In addition, the states of clay depend on water content and hence the height of the specimen under drained conditions. Futhermore, based on present and past studies, because immediate elastic deformation occurs instantly after the pressure increment without time-delayed behavior, the factor representing immediate elastic deformations in the rheological model is necessary. The investigation described in this paper, based on rheological model, is designed to identify the immediate elastic deformations and the effects of thixotropy and height of clay specimens with varing water content and stress level on creep deformations. For these purposes, the uniaxial drain-type creep tests were performed. Test results and data for three compacted clays have shown that a linear top spring is needed to account for immediate elastic deformations in the rheological model, and at lower water content below the visco-plastic limit, the effects of thixotropy and height of clay specimens can be represented by the proposed rheological model not considering the effects. Therefore, the rheological model does not necessitate the other factors representing these effects. On the other hand, at water content higher than the visco-plastic limit, although the state behavior of clays is visco-plastic or viscous flow at the beginning of the test, the state behavior, in the case of the lower height sample, does not represent the same behavior during the process of the test, because of rapid drainage. In these cases, the rheological model does not coincide with the model in the case of the higher specimens.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.2
• /
• pp.156-163
• /
• 2009

Statement of problem: Recently, there have been increased esthetic needs for posterior dental restorations. The failure of posterior dental ceramic restoration are possible not only by the characters of the component materials but also by the type of food. Purpose: The research aim was to compare the in vitro fracture resistance of simulated first molar crowns fabricated using 4 dental ceramic systems, full-porcelain-occlusal-surfaced PFG, half-porcelain-occlusal-surfaced PFG, Empress 2, Ice Zirkon and selected Korean foods. Material and methods: Eighty axisymmetric crowns of each system were fabricated to fit a preparation with 1.5- to 2.0-mm occlusal reduction. The center of the occlusal surface on each of 15 specimens per ceramic system was axially loaded to fracture in a Instron 4465, and the maximum load(N) was recorded. Afterwards, selected Korean foods specimens(boiled crab, boiled chicken with bone, boiled beef rib, dried squid, dried anchovy, round candy, walnut shell) were prepared. 15 specimens per each food were placed under the Instron and the maximum fracture loads for them were recorded. The 95% confidence intervals of the characteristic failure load were compared between dental ceramic systems and Korean foods. Afterwards, on the basis of previous results, 14Hz cyclic load was applied on the 4 systems of dental ceramic restorations in MTS. The reults were analyzed by analysis of variance and Post Hoc tests. Results: 95% confidence intervals for mean of fracture load 1. full porcelain occlusal surfaced PFG Crown: 2599.3 to 2809.1 N 2. half porcelain occlusal surfaced PFG Crown: 3689.4 to 3819.8 N 3. Ice Zirkon Crown: 1501.2 to 1867.9 N 4. Empress 2 Crown: 803.2 to 1188.5 N 5. boiled crab: 294.1 to 367.9 N 6. boiled chicken with bone: 357.1 to 408.6 N 7. boiled beef rib: 4077.7 to 4356.0 N 8. dried squid: 147.5 to 190.5 N 9. dried anchovy: 35.6 to 46.5 N 10. round candy: 1900.5 to 2615.8 N 11. walnut shell: 85.7 to 373.1 N under cyclic load(14Hz) in MTS, fracture load and masticatory cycles are: 1. full porcelain occlusal surfaced PFG Crown fractured at 95% confidence intervals of 4796.8-9321.2 cycles under 2224.8 N(round candy)load, no fracture under smaller loads. 2. half porcelain occlusal surfaced PFG Crown fractured at 95% confidence intervals of 881705.1-1143565.7 cycles under 2224.8 N(round candy). no fracture under smaller loads. 3. Ice Zirkon Crown fractured at 95% confidence intervlas of 979993.0-1145773.4 cycles under 382.9 N(boiled chicken with bone). no fracture under smaller loads. 4. Empress 2 Crown fractured at 95% confidence intervals of 564.1-954.7 cycles under 382.9 N(boiled chicken with bone). no fracture under smaller loads. Conclusion: There was a significant difference in fracture resistance between experimental groups. Under single load, Korean foods than can cause fracture to the dental ceramic restorations are boiled beef rib and round candy. Even if there is no fracture under single load, cyclic dynamic load can fracture dental posterior ceramic crowns. Experimental data with 14 Hz dynamic cyclic load are obtained as follows. 1. PFG crown(full porcelain occlusion) was failed after mean 0.03 years under fracture load for round candy(2224.8 N). 2. PFG crown(half porcelain occlusion) was failed after mean 4.1 years under fracture load for round candy(2224.8 N). 3. Ice Zirkon crown was failed after mean 4.3 years under fracture load for boiled chicken with bone(382.9 N). 4. Empress 2 crown was failed after mean 0.003 years under fracture load for boiled chicken with bone(382.9 N).

• Archives of Plastic Surgery
• /
• v.36 no.6
• /
• pp.691-701
• /
• 2009

Purpose: Deviations of arterial palmar arches in the hand can be explained on the embryological basis. The purpose of this study was to provide new information about palmar arches through cadaver's dissection. The values of the location and diameter in these vessels were analyzed in order to support anatomical research and clinical correlation in the hand. Methods: The present report is based on an analysis of dissections of fifty - three hands carried out in the laboratory of gross anatomy. A reference line was established on the distal wrist crease to serve as the X coordinate and a perpendicular line drawn through the midpoint between middle and ring fingers, which served as the Y coordinate. The coordinates of the x and y values were measured by a digimatic caliper, and statistically analyzed with Student's t - test. Results: Complete superficial palmar archs were seen in 96.2 % of specimens. In the most common type of males, the superficial arch was formed only by the ulnar artery. In the most common type of females, the superficial arch was formed anastomosis between the radial artery and the ulnar artery. The average length of the superficial and deep palmar arch is $110.3{\pm}33.0mm$ and $67.9{\pm}14.0mm$ respectively. Regarding the superficial palmar arch, ulnar artery starts $-16.1{\pm}5.1mm$ on X - line, and $2.5{\pm}24.5mm$ on Y - line. Radial artery appears on palmar side $7.7{\pm}3.2mm$ on X - line, and $20.9{\pm}10.9mm$ on Y - line. But radial artery starts on $6.3{\pm}3.6mm$ on X - line, and $3.4{\pm}5.1mm$ on Y - line. Digital arteries of superficial palmar arch starts on $6.1{\pm}3.7mm$, $33.9{\pm}8.8mm$ on index finger, $1.8{\pm}3.4mm$, $40.1{\pm}7.3mm$ on middle finger, $-3.2{\pm}4.9mm$, $42.6{\pm}7.0mm$ on ring finger, and $-8.9{\pm}5.1mm$, $42.5{\pm}80mm$ on little finger in respective X and Y coordinates. Radial artery of deep palmar arches measured at the palmar side perforating from the dorsum of hand. It's coordinates were $9.7{\pm}4.8mm$ on X - line, $21.7{\pm}10.2mm$ on Y - line. Ulnar artery was measured at hypothenar area, and it's coordinates were $-20.4{\pm}6.3mm$ on X - line, and $30.6{\pm}7.4mm$ on Y - line. Conclusions: Anatomically superficial palmar arch can be divided into a complete and an incomplete type. Each of them can be subdivided into 4 types. The deep palmar arch is less variable than the superficial palmar arch. We believe these values of the study will be used for the vascular surgery of the hand using the endoscope and robot in the future.

• The korean journal of orthodontics
• /
• v.31 no.1 s.84
• /
• pp.85-95
• /
• 2001

The purpose of this study was to evaluate the material for fixed type retainer, allowing physiologic tooth movement. and proper remodeling or periodontal tissue during retention period. The Present study was Performed to observe the histologic changes of periodontal tissue after application of different types of fixed type retainer after orthodontic tooth movement in young adult dogs. For this study, 4 young adult dogs were used as a experimental animal and experimental group was divided into three groups : experimental group 1 contained right side maxillayy third incisors and canines, experimental group 2 contained contralateral teeth of same animals, and control group contained mandibular premolars. And each dogs were applied the 4 different types of fixed type retainer to experimental group 1. The experimental teeth were ligated on the Sentalloy closed coil $spring^{\circledR}$(Tomy Co., Japan) from maxillary third incisors and canines and applied orthodontic force at initial 200gm-forced during 1 week. All the experimental animals were sacrificed on the 3rd week after the orthodontic teeth movement and then the specimens were taken, fixed in formalin, embeded in parafin, sectioned $6-8{\mu}m$ in thickness and stained with Hematoxylin-Eosin staining, and Masson's trichrome staining method. Examined under the light microscopy The following results were observed. 1. There were observed that decreased infiltration of giant tells in pressure side and increased the new bone forming in tension side on the specimen of 6-stranded 0.0195' $Respond^{\circledR}$(G&H Co., U.S.A.) group. Periodontal ligament fibers were much compressed or elongated in 3-stranded 0.018', 0.020' $Dentaflex^{\circledR}$(Dentarum Co., Germany), and Superbond $C&B^{\circledR}$(Sun Medical Co., Japan) groups. 2. In experimental group 1, necrotic bone inside the alveolar bone of pressure side, forming of the sharpey's fiber in osteoid tissue, and remodeling of the periodontal ligament were observed in all animals. 3. In experimental group 2, it was observed that the amount of bone resorption was equal or decreased in pressure side, and increased new bone forming and significantly decreased infiltration of giant cell than the experimental group 1. By this results, it considered that 6-stranded $Respond^{\circledR}$(G&H Co., U.S.A.) wire was the most useful material allowing early periodontal tissue remodeling.

• Journal of dental hygiene science
• /
• v.16 no.2
• /
• pp.176-182
• /
• 2016

The purpose of this study was to evaluate the in-vitro efficacy of the active ingredients of dentifrice following treatment time. The whitening effect was evaluated by a change in lightness value relative to the contact time of hydrogen peroxide, by using artificially stained hydroxyapatite discs. The anti-calculus effect was assessed based on the amount of calcium eluted from the human dental calculus by sodium pyrophosphate. Remineralization was evaluated by the Vickers hardness test following the application of sodium fluoride to bovine enamel. In order to view dentinal tubules occlusion, the formation of insoluble calcium salts by bovine dentin specimens was observed using scanning electron microscopy. Change in lightness value (${\Delta}L$) was $5.50{\pm}1.51$ after 1 min of treatment, $5.73{\pm}0.43$ after 3 min, $8.64{\pm}0.24$ after 10 min, $18.93{\pm}0.76$ after 30 min, and $27.35{\pm}0.54$ after 60 min. The amount of calcium eluted from the human dental calculus was $4.23{\pm}0.14ppm$ after 1 min of treatment, $4.51{\pm}0.04ppm$ after 3 min, $12.12{\pm}0.16ppm$ after 10 min, $17.85{\pm}0.81ppm$ after 30 min, and $25.15{\pm}0.32ppm$ after 60 min. The Vickers hardness change value (${\Delta}VHN$) was $1.96{\pm}1.44$ after 1 min, $1.52{\pm}1.06$ after 3 min, $9.06{\pm}0.15$ after 10 min, $10.83{\pm}5.13$ after 30 min, and $12.55{\pm}2.09$ after 60 min. Partial dentinal tubules occlusion was observed at 10 min and complete occlusion was evident at 60 min. In summary, the use of patch type dentifrices for 10, 30, or 60 min were 1.57 to 8.26 times more effective than using the paste type dentifrices for 1 to 3 min. Based on these findings, it is reasonable to expect that the use of patch type dentifrices for 10 min would lead to remineralization, anti-calculus and dentinal tubules occlusion effects, and that use for 30 min would result in a whitening effect.

• Pediatric Infection and Vaccine
• /
• v.9 no.2
• /
• pp.182-192
• /
• 2002

Purpose : This study was performed to characterize the epidemiologic and clinical features of acute adenoviral lower respiratory tract infections(LRTIs). Methods : Virological analysis was done from respiratory specimens obtained from patients with LRTIs hospitalized to other hospitals and referred to the Department of Pediatrics, Seoul National University Children's Hospital(SNUCH) from June 1998 to July 2000. Viral diagnosis was made by isolation of viruses employing HEp-2 cell culture and indirect immunofluorescent staining with monoclonal antibodies. Serotypes of adenoviruses were determined by neutralization test using antiserum for types 1, 2, 3, 4, 5, 6, 7 and 11. Medical records of children admitted to the SNUCH were reviewed retrospectively. Results : Adenovirus was isolated from 118(9.0%) of 1,305 children with LRTIs. Serotypes were 3(39.0%), 7(16.9%), 1(11.0%), 2(7.6%), 4(7.6%), 6(5.9%), 11(2.5%), and 5(0.8%) and 10 strains(8.5%) were not neutralized by antisera included in the study. Infections by type 3 and type 7 occurred in outbreaks. Male to female ratio was 1.0:0.9 and mean age was 1.95 years. The clinical diagnoses were pneumonia(83%), acute tracheobronchitis(12%) and bronchiolitis(5%). Associated symptoms, signs and abnormal laboratory findings included cough(100%), sputum(73.5%), fever(54.2%), rale(59.3%), wheezing(34%), anemia(35%) and leukopenia(15.8%). Mortality was in 13.5%. Residual radiologic sequelae was identified in 32.6% of the patients followed. Conclusion : These data confirms that adenovirus may cause severe lower respiratory tract diseases, and infections by type 3 and 7 may occured in outbreaks.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.3 no.2
• /
• pp.77-92
• /
• 1970

Ueda, in the course of his systematic work on the lavers, Porphyra, in Japan and Korea in 1932, mentioned that most of the cultivated Porphyra belong to Porphyra tenera Kjellman. Then he, dividing the species into two forms, f. typica and f. kjellmani, put Korean cultivated Porphyra under the latter. From the 1930s to the early 1940s, Fujikawa, Kaneko and others worked on Physiological experiments or cultivational experiments of Porphyra in the culture-bed, but there was no mention about the cultivated Porphyra species. However, many fishermen generally recognize that the characteristics of cultivated Porphyra vary depending on their habitat or the picking season, and it is considered that these differences are due to the varieties of the species which are well adaptable to various environments. Recently, I have become aware of the predominant occurrence of P. yezoensis Ueda in most culture-beds of Korea as in the Tokyo Bay or other places in Japan. At present, since artificial seeding for the cultivation of Porphyra with Conchocelis has been carried out and peculiar species can be cultured, a study of the species of cultivated Porphyra has become an important subject. I collected the specimens from a number of culture-beds which are located in the legions shown in fig. 1 from January, 1968 to May, 1970 and found that there are five species, P. tenera Kjellman, P. yezoensis Ueda, P. kuniedai Kurogi, P. seriata Kjellman and P. suborbiculata Kjellman. Among them, P. kuniedai was treated as a round-type, a form of P. tenera, by Kunieda (1939) and Tanaka (1952) and the occurrence of this form is generally recognized by most fishermen. At present, as mentioned above, the most dominant species of cultivated Porphyra is P. yezoensis but the cultivation of P. tenera is restricted to certain culture-beds or the early half of the cultivation period. P. kunieda appears as a mixed species throughout most of the culture-beds, particulary in the later half of the period, while when it was picked in January it appeared dominantly in a place such as Gum-Dang where the 'Bal', splitted bamboo piece mat, was settled during the last of September. This is the first seeding process. The latter two species, P. suborbiculata and P. seriata appear frequently but in small amounts in the later half of the period particulary in the western region of the southern coast. However, it can not be ascertained when P. yezoensis becomes predominant, because specimens have not been available up until recent years but the process can be described as follows: We commonly recognize the ecological characteristics of P. tenera as follows; First, the conchospores of the species develop earlier and the period of its discharge is shorter than those of P. yezoensis; second, the microscopical buds discharge neutral spores which develop into new buds directly and buds develop repeatedly through a short period. Consequently, according to such above ecological characteristics, the species can grow thick on the 'Bal' exclusively. However, buds may disappear when they are harmed by disease such a 'infection by certain parasites or by other unusual environmental conditions. Thus P. yezoensis are enabled to grow on the 'Bal' instead of the former species since they not only develop later than the former but also macroscopical fronds discharge the neutral spore throughout the period from October to May. Likewise, if any disease appears in the culture-bed ill the later half of the period, the former is more severely damaged than the latter because the former have less resistance to the disease than the latter. Thus fewer frond survive and fewer carpospores which are the origin of the next generation can be discharged. However the latter by their nature can continue growing until early summer. In the case of the culture-bed where the above phenomenon occurs repeatedly P. yezoensis gradually may become the dominant species among cultivated Porphyra. In support of the validity of this process we find that according to the description and the plate of Wada (1941), P. tenera, P. yezoensis and P. kuniedai grow together in the culture-bed at the mouth of the Nakdong River where P. yezoensis occurs predominantly and mixed with P. kuniedai.

• Nuclear Engineering and Technology
• /
• v.22 no.4
• /
• pp.337-350
• /
• 1990

A post-irradiation annealing study was conducted with use of reactor pressure vessel(RPV) steel A533B Cl.1 base metal irradiated to a dose of 4.84$\times$10$^{18}$ n/$\textrm{cm}^2$ at about 38$0^{\circ}C$. Microhardness and positron annihilation (PA) methods were used to obtain better understanding of the recovery of radiation hardening. Isochronal anneal experiments indicated that two recovery processes occur during annealing of irradiated specimens. The first recovery process occurs in the temperature range of 280-3O5$^{\circ}C$, Michrohardness and positron annihilation (PA) methods were used to obtain better understanding of the recovery of radiation hardening. Isochronal anneal experiments indicated that two recovery processes occur during annealing of irradiated specimens. The first recovery process occurrs in the temperature range of 280-305$^{\circ}C$. The variations of Ip, Iw and R parameters indicated that the formation of vacancy clusters by vacancy agglomeration and the annihilation of monovacancies are the first recovery process. The second recovery process occurs in the range of 405-49$0^{\circ}C$ and positron annihilation parameters measured indicated that the dissolution of carbon atoms decorated around vacancy-type defects and possible precipitates, and the annihilation of monovacancies give rise to the second recovery process. It was further indicated that radiation anneal hardening (RAH) in the range of 305-405$^{\circ}C$ between the temperature ranges for the two processes occurs due to the formation of carbon-decorated vacancy clusters and precipitates. The activation energies, orders of reaction and other characteristics of recovery processes were determined by the Meechan-Brinkman method. The activation energy for the first recovery process was determined as 1.76 eV and that for the second recovery process as 2.00eV. These values are lower than those obtained by other workers. This difference may be attributed to the lower copper content of the RPV steel used in the present study. The order of reaction for the first recovery process was determined as 1.78, while that for the second recovery process as 1.67 Non-integer orders of reaction for recovery processes seem to be attributed to the fact that several mechanisms for the first order and the second order of reaction are compounded in one process. This result also supports for the above conclusions from measurements of PA parameters.