• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2013년도 추계학술대회
• /
• pp.1018-1020
• /
• 2013

PCB 제작 분야에서 TCP와 COF에서는 전기적인 특성검사만으로 자동화를 이루어지고 있으며, 실제 단락 및 돌기(근사단락) 형태의 데이터 불량 등에 대해서는 노동력을 동원해 불량을 검출하고 있는 실정이다. 본 논문에서는 영상처리에 의해 국부지역패턴 분석법에 기초한 검출기법을 제안한다. 제안한 방법은 히스토그램보정, 공간위치보정 및 최대왜곡좌표를 구하는 전처리 과정을 포함하여, 지역기반의 패턴분석법이 적용된다. 모의실험을 통하여 제안한 방식은 기존의 영역기반의 검출기법에 비해 성능이 개방 및 근사개방 결함 검출에서 크게 성능을 개선할 수 있음을 보인다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1774-1777
• /
• 1996

In this paper, applicability of SI-PD(switching impulse - partial discharge) testing method was put on an attempt as a newly proposed diagnostic method for the underground distribution power cable system in Korea. For this purpose, SI-PD testing equipment was designed, and tests were performed using artificial needle-type defects integrated into the 22.9 kV CN/CV cables in drder to prove its reliability. As a result, arc noises, generated from spark gap, were considerably decreased by use of a pneumatic switch immersed into oil, and artificial needle-type defects were well detected with impulse voltage level under $2U_0$. These results imply that it is likely possible to apply SI-PD measurement method as a the nondistructive test for the 22.9 kV CN/CV cable system in Korea.

• 한국재료학회지
• /
• 제14권1호
• /
• pp.41-45
• /
• 2004

P-type $Bi_{0.5}$$Sb_{1.5}$ $Te_3$ thin films were deposited by the flash evaporation technique, and their thermoelectric properties and electronic transport parameters were investigated. The effective mean free path model was adopted to examine the thickness effect on the thermoelectric properties. Annealing effects on the carrier concentration and mobility were also studied, and their variations were analyzed in conjunction with the antisite defects. Seebeck coefficient and electrical resistivity versus inverse thickness showed a linear relationship, and the effective mean free path was found to be 3150$\AA$. No phase transformation and composition change were observed after annealing treatment, but carrier mobility increased due to grain growth. Carrier concentration decreased considerably due to reduction of the antisite defects, so that electrical conductivity decreased and Seebeck coefficient increased. When annealed at 473 K for 1 hr, Seebeck coefficient and electrical conductivity were $160\mu$V/K and 610 $W^{-1}$ $cm^{ -1}$, respectively. Therefore, the thermoelectric quality factor were also enhanced to be $16\mu$W/cm $K^2$.>.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 춘계학술대회 및 기술 세미나 논문집 디스플레이 광소자
• /
• pp.65-66
• /
• 2008

The realization and origin of p-type ZnO are main issue for photoelectronic devices based on ZnO material. N-doped and nominally undoped p-type ZnO films were achieved on silicon (100) and homo-buffer layers by RF magnetron sputtering and post in-situ annealing. The undoped film shows high hole mobility of 1201 $cm^2V^{-1}s^{-1}$ and low resistivity of $0.0454\Omega{\cdot}cm$ with hole concentration of $1.145\times10^{17}cm^{-3}$. The photoluminescence(PL) spectra show the emissions related to FE, DAP and defects of $V_{Zn}$, $V_O$, $Zn_O$, $O_i$ and $O_{Zn}$.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.219-219
• /
• 2000

A Plate type pipe is used for heat exchange in radiator of a vehicle. The pipe has several rooms through which water flows and heat is dissipated into outside . In the case that there are small holes, cracks or some scratches on the plate, the radiators lost their functions due to Leakage. This may result in overheating of engine in a car. Thus, we need to perform the entire inspection of the plate type pipe in advance before assembling the radiator. In manufacturing process of the plate type pipe, the productive speed is very high and that may be performed continuously. So, there is no room to perform the outlook inspection by typical image processing techniques. This paper proposes a new method to inspect the outlook surface of the plate type pipe automatically with high speed. Especially, the sequential processing technique of an algorithm which detects defects on the surfaces of the plate type pipe is proposed for line scan camera which captures line image. To evaluate the inspection performance, a series of experiments is performed.

• 한국금형공학회:학술대회논문집
• /
• 한국금형공학회 2008년도 하계 학술대회
• /
• pp.31-34
• /
• 2008

The L-bending of inner-structure bonded sandwich sheet metal is examined to reduce springback and defects of bent parts. The specimen is composed of top and bottom layers and a middle layer with dimple type-inner-structure and each layer is bonded by resistance welding. This specimen with hollow type-inner-structure shows different bending characteristics from the conventional sandwich sheet metals with solid type-inner-structure. The experiments were conducted for two kinds of working conditions, that is, clearance and movement of first bent specimen for second bending. The deformed profile, bend angle and springback were investigated and compared and then the proper working conditions for L-bending of sandwich sheet metal were prosed.

• Archives of Plastic Surgery
• /
• 제33권5호
• /
• pp.546-551
• /
• 2006

Purpose: The reconstruction of oropharyngeal defect after cancer surgery is very difficult because of their complicated structure and the functional importance to prevent velopharyngeal incompetence. In this article we investigated affecting factors of velopharyngeal function after reconstruction and a fundamental rule of reconstruction for saving their functions such as swallowing, speeching and breathing. Methods: We classified 18 patients into three group under Kimata's grouping. Type I defect(6 patients) was healed by primary closure or secondary intention. In Type II or III defect, two operation methods were used - the folded flap(8 patients) and modified Gehanno method(4 patients), which include a lateral-posterior pharyngeal rotation-advancement flap. We evaluated wound dehiscence between the flap and the soft palate, speech intelligibility using Hirose's method, regurgitation during oral feeding, and hypernasality. Results: Most of type I or II defects patients recovered satisfactory velopharyngeal function. But, in patients with type III defects we found wound dehiscence, worse speech function, and common velopharyngeal incompetence. Conclusion: The large defect size and presence of wound dehiscence are major factors of postoperative velopharyngeal function. We conclude that folded flap or modified Gehanno method is a good reconstructive operation method for broad contact between the flap and defect site, preventing wound problem.

• Advances in nano research
• /
• 제2권1호
• /
• pp.1-14
• /
• 2014

Dislocations are basic crystal defects and represent one-dimensional native nanostructures embedded in a perfect crystalline matrix. Their structure is predefined by crystal symmetry. Two-dimensional, self-organized arrays of such nanostructures are realized reproducibly using specific preparation conditions (semiconductor wafer direct bonding). This technique allows separating dislocations up to a few hundred nanometers which enables electrical measurements of only a few, or, in the ideal case, of an individual dislocation. Electrical properties of dislocations in silicon were measured using MOSFETs as test structures. It is shown that an increase of the drain current results for nMOSFETs which is caused by a high concentration of electrons on dislocations in p-type material. The number of electrons on a dislocation is estimated from device simulations. This leads to the conclusion that metallic-like conduction exists along dislocations in this material caused by a one-dimensional carrier confinement. On the other hand, measurements of pMOSFETs prepared in n-type silicon proved the dominant transport of holes along dislocations. The experimentally measured increase of the drain current, however, is here not only caused by an higher hole concentration on these defects but also by an increasing hole mobility along dislocations. All the data proved for the first time the ambipolar behavior of dislocations in silicon. Dislocations in p-type Si form efficient one-dimensional channels for electrons, while dislocations in n-type material cause one-dimensional channels for holes.

• Journal of Periodontal and Implant Science
• /
• 제25권2호
• /
• pp.341-356
• /
• 1995

The purpose of this study was to evaluate the effect of demineralized freeze dried bone and demineralized bone gel with guided tissue regeneration treatment around titanium implants with dehisced bony defects and also evaluate space maintaining capacity of demineralized bone gel type and DFDB powder type under e-PTFE membrane. In 3 Beagle dogs, mandibular premolar was extracted and four peri-implant osteotomies were formed for dehiscence. After insertion of implants, the four peri-implant defects were treated as follows. 1) In control group. no graft material and barrier membrane were applied. 2) In experimental group.1, the site was covered only with the e-PTFE membrane. 3) In experimental group 2,received DFDB powder and covered by the e-PTFE membrane. 4) In experimental group 3, demineralized bone gel and e-PTFE membrane were used. By random selection, animals were sacrificed at 4, 8, 12 weeks. The block sectioned specimens were prepared for decalcified histologic evaluation(hematoxylin and eosin staining) and undecalcified histologic evahiation(Von Kossa's and toluidine blue staining) with light microscopy. The results of this study were as follows. 1) In control group, there was a little new bone formation and connective tissue was completely filled in the defect area. 2) Experimental group 1 showed lesser quantity of bone formation as compared to the bone grafted group. Thin vertical growth of new bone formation around implant fixture was shown. 3) Experimental group 2 showed thick bucco-lingual growth of new bone formation and grafted bone particles were almost resorbed in 12 week group. 4) In experimental group 3, most grafted bone particles were not resorbed in 12 week group and thick bucco-lingual bone formation was shown in dehisced defect base area. 5) There was no remarkable differences in space making capacity and new bone formation procedure between demineralized freeze-dried bone powder type and demineralized bone gel type.

• 한국지반신소재학회논문집
• /
• 제2권3호
• /
• pp.19-24
• /
• 2003

폐기물 매립지 바닥층 및 사면에 적용되는 평편 형 및 텍스츄어드 형 고밀도 폴리에틸렌 지오멤브레인의 장기성능이 검토되었다. 특수 설계된 스크래치 장치를 이용하여 인위적으로 지오멤브레인 표면에 결함을 부여하였다. 결함 및 미결함 지오멤브레인의 역학적 및 마찰특성, 화학저항성 및 자외선 저항성 그리고 산화유도시간 등이 검토되었다. 텍스츄어드 형 지오멤브레인의 마찰특성이 평편 형 지오멤브레인 보다 우수함을 알 수 있었다. 끝으로 화학저항성, 자외선 저항성 그리고 산화유도시간 측정결과로부터 결함이 없는 지오멤브레인과 텍스츄어드 형 지오멤브레인의 장기성능이 결함이 있는 지오멤브레인보다 우수함을 알 수 있었다.