• Journal of the Korean Society of School Health
• /
• v.4 no.2
• /
• pp.100-118
• /
• 1991

This study was conducted in order to grasp the condition of the student's knowledge and attitude about sex. And to offer the basic materials for sex education of school health service. The objects were comprised of 464 volunteered students who study in commercial girls' high school. The material of this study was the questionaire suited to the purposed of this research which has been made through studying references. All the questionaire written by students. The self reported questionaires were collected immediately without explanation on supervision of school nurse. The data was collected from 28th to 30th of June on 1990. Analysis of the data was done utilizing SPSS for percentage, mean, ANOVA and Pearson Correlation Coefficients. The Results are as follows; 1. General features of the objects of study School grade distribution was similar. Fathers of 41-50 years were the highest(58.3%), mothers of 41-50 years were the highest(64.3%), family of living together were the highest(87.5%), fathers of graduated high school were highest(60.7%), mothers of graduated middle school were the highest(43.0%) and neuclear families were highest(91.5%). 2. The Conditions of Knowledge about sex When 5 Point was given to "Well known" and 1 point was given to "Never known", the total average was 2.97, Especially the mean of Female physiology was shown 3.93, 73.4% of students have known. But the mean of male physiology was shown 2.23, 17.2% of students only. And Family planning item was 3.54, hymen item was 3.38, female genitalia item was 3.35, abortion item was 3.25, Intercourse and pregnancy item was 3.24, Ovulation item was 3.02, Contraception item was 2.97, Veneral disease and masturbation item was 2.82, maintenance of pregnancy item was 2.76, Anatomical differences between male and female item was 2.59, male genitalia item was 2.31, ejaculation item was 2.27. 3. The conditions of attitude about Sex When 5 point was given to "Very affirming" and 1 point was given to "Very deny" the total average was 3.20. Especially the mean of social intercourse between other sex was shown 3.92, 73.4% of students have affirmed. But the mean of psychic response on menstruation was shown 2.24, 8.8% of students only. And baby birth item was 3.72, the fact that I am a woman item was 3.53, marriage item was 3.49. Secondary body change item was 3.38, puberty item was 3.31, delivery and sexual intercourse item was 3.05, pregenancy item was 3.02, psychic condition on menarche item was 2.50. Also present counsellors about sex were teachers in charge (44.9%), friends(21.6%), mothers(20.6%), elder sisters (10.6%), mass-communications (1.5%), fathers (0.4%), school nurses and elder brother(0.2%). In addition to, future counsellors about sex were friends (37.7%), mothers(30.6%), elder sister (18.4%), school nurses (4.6%), mass communication (3.8%), teachers in charge (2.5%), elder brothers (1.4%) and fathers(1.0%). 4. Correlation between the general features and knowledge variables School grade and knowledge condition has relationship to female genitalia(P<0.05), female physiology (P<0.00), male physiology (P<0.05),ovulation (P<0.00), and femily planning (P<0.005). Fathers age and knowledge condition has relationship to male physiology(P<0.05), and abortion (P<0.05). Marrital status and knowledge condition has relationship to female physiology (P<0.01), masturbation (P<0.05). Fathers educational background and knowledge condition has relationship to masturbation (P<0.00). Mothers age and knowledge condition has relationship to family planning (P<0.05). 5. Correlation between the general futures and attituded variables Fathers age and attitude condition has relationship to psychic response on menstruation (P<0.05). Mothers age and attitude condition has relationship to fact that I am a woman (P<0.00). Mothers educational background and attitude condition has relationship to social intercourse between other sex (P<0.05). Type of family and attitude condition has relationship to puberty (P<0.01). 6. Correlation between knowledge condition and attitude condition Those who had more knowledge about sex have more affirmative response (P<0.001).

• Journal of Chest Surgery
• /
• v.35 no.5
• /
• pp.369-374
• /
• 2002

Background: Proper construction of vascular access and adequate maintenance are essential for the prognosis of the hemodialysis patients. Though arteriovenous fistula using autogenous vessel is the first of choice, the incidence of arteriovenous fistula using artificial graft is gradually increasing. The aim of this study was to analyse the patency rates between autogenous and artificial fistula, among artificial graft types, according to the accompanied disease. Material and Method: A retrospective study was conducted on 186 patients who underwent 292 arteriovenous fistula operations for hemodialysis at Korea University Guro Hospital between 1996 and 2000. Mean age of the patients was 54.37 $\pm$ 12.79years, and the male: female ratio 99:87. Result: Among 292 operations, there were 156 autogenous fistula and 116 graft fistula. The other 20 operations were thrombectomy, takedown of graft, revision, and balloon dilatation. Patency rates of autogenous fistula were 92.78 $\pm$ 2.35% at 1 year and 39.03$\pm$9.08% at 5 years, and those of graft fistula were 96.09 $\pm$ 2.22% at 1 year and 16.45 $\pm$ 10.15% at 5 scars. However, there was no statistical significance between the two operations. The patients who had hypertension, diabetes or both had no statistical significance in the patency rate compared to that of patients without underlying disease. In addition, the type of graft used did not affect the patency rate. Second operation was needed in 62 patients and third operation in 31 patients, but their patency rate again had no statistical significance compared to that of the first operation. Conclusion: The patency of the artificial graft fistula was comparable to the autogenous fistula, but the patency according to types of graft need to be studied further. Furthermore, the underlying diseases did not affect the fistula patency.

• Journal of Chest Surgery
• /
• v.42 no.5
• /
• pp.566-575
• /
• 2009

Background: The function of a bioprosthetic heart valve is determined largely by the material properties of the valve cusps. The uniaxial tensile test has been studied extensively. This type of testing, however, does not replicate the natural biaxial loading condition. The objective of the present study was to investigate the regional variability of the biaxial strain versus pressure relationship based on the types of fixation liquid models. Material and Method: Porcine aortic valves and pulmonary valves were assigned to three groups: the untreated fresh group, the fixed with glutaraldehyde (GA) group, and the glutaraldehyde with solvent (e.g., ethanol) group. For each group we measured the radial and circumferential stretch characteristics of the valve as a function of pressure change. Result: Radial direction elasticity of porcine aortic and pulmonary valves were better than circumferential direction elasticity in fresh, GA fixed and GA+solvent fixed groups (p=0.00). Radial and circumferential direction elasticity of pulmonary valves were better than aortic valves in GA fixed, and GA+solvent fixed groups (p=0.00). Radial and circumferential direction elasticity of aortic valves were decreased after GA and GA+solvent fixation(p=0.00), except for circumferential elasticity of GA+solvent fixed valves (p=0.785). The radial (p=0.137) and circumferential (p=0.785) direction of elasticity of aortic valves were not significantly different between GA fixed. and GA+solvent fixed groups. Radial (p=0.910) and circumferential (p=0.718) direction of elasticity of pulmonary valve also showed no significant difference between GA fixed and GA+solvent fixed groups. Conclusion: When fixing porcine valves with GA, adding a solvent does not cause a loss of mechanical properties, but, does not improve elasticity either. Radial direction elasticity of porcine aortic and pulmonary valves was better than circumferential direction elasticity.

• Tuberculosis and Respiratory Diseases
• /
• v.49 no.4
• /
• pp.453-465
• /
• 2000

Background : Lung carcinogenesis is a multistage process involving alterations in multiple genes and diverse pathway. Mutational activation of oncogenes and inactivation of tumor suppressor genes, and subsequent increased genetic instability are the major genetic events. The p53 gene and FHIT gene as tumor suppressor genes contribute to the pathogenesis of lung cancer, evidenced by mutation, microsatellite instability(MI) and loss of heterozygosity(LOH). Methods : We analysed genetic mutations of p53 and FHIT gene in 29 surgical specimens of nonsmall cell lung cancer using PCR-single strand conformation polymorphism, DNA sequencing and RT-PCR. MI and LOH were analyzed in loci of D3S1285, D9S171, and TP53. Results : In 2 cases, point mutation of p53 gene was observed on exon 5. MI of 3 times and LOH of 14 times were observed in at least one locus. In terms of the location of microsatellite, D3S1285 as a marker of FH1T was observed in 5 cases out of 26 specimens; D9S171 as a marker of p16 in 5 out of 17; and TP53 as a marker of p53 in 7 out of 27. In view of histologic type, squamous cell carcinoma presented higher frequency of microsatellite alteration, compared to others. Mutation of FHIT gene was observed in 11 cases and 6 cases of those were point mutation as a silent substitution on exon 8. FHIT mRNA expression exhibited deletion on exon 6 to 9 in 4 cases among 15 specimens, presenting beta-actin normally. Conclusion : Our results show comparable frequency of genetic alteration in nonsmall cell lung cancer to previous studies of Western countries. Microsatellite analysis might have a role as a tumor marker especially in squamous cell carcinoma. Understanding molecular abnormalities involved in the pathogenesis could potentially lead to prevention, earlier diagnosis and the development of novel investigational approaches to the treatment of lung cancer.

• Tuberculosis and Respiratory Diseases
• /
• v.49 no.4
• /
• pp.474-485
• /
• 2000

Background : Current studies on multimodal strategy for N2 non-small cell lung cancer are being high interest, have drawn much attention. N2 lung cancer, however, is composed of is divided into several sub groups with that have different prognoses. The prognostic factors still remain controversial. Methods : Between January 1990 and June 1999, 180 patients with N2 lung cancer who underwent surgical resection were investigated, excluding 10 of these for surgical mortality. All patients underwent mediastinal lymph node dissection. 20 clinicopathologic factors were investigated by univariable and multivariable analyses to identify significant prognostic factors among resected N2 disease. Results : The overall 5-year survival rate was 20.6%. Multivariable analyses among overall patients revealed 3 significant prognostic factors : Age, Histologic type, Vascular invasion. Based on the result, 49 patients with both age more than 60 and pathologic Non-squamous cell showed a 5-year survival of 5.0%, whereas 37 patients with neither of the factors showed a 5-year survival of 56.6%(p<0.001). And 12 patients with both vascular invasion and pathologic Non-squamous cell showed a 5-year survival of 11.9%, whereas 67 patients with neither of the factors showed a 5-year survival of 33.6%(p=0.01). Conclusion : The prognosis of surgically resected N2 disease varies according to the 3 significant prognosis factors. Tumor size may be an additional influencing factor in the prognosis of N2 disease.

• Tuberculosis and Respiratory Diseases
• /
• v.65 no.6
• /
• pp.476-486
• /
• 2008

Background: TRAIL (TNF-related apoptosis inducing ligand) is a newly identified member of the TNF gene family which appears to have tumor-selective cytotoxicity due to the distinct decoy receptor system. TRAIL has direct access to caspase machinery and induces apoptosis regardless of p53 phenotype. Therefore, TRAIL has a therapeutic potential in lung cancer which frequently harbors p53 mutation in more than 50% of cases. However, it was shown that TRAIL also could activates $NF-{\kappa}B$ in some cell lines which might inhibit TRAIL-induced apoptosis. This study was designed to investigate whether TRAIL can activate $NF-{\kappa}B$ in lung cancer cell lines relatively resistant to TRAIL-induced apoptosis and inhibition of $NF-{\kappa}B$ activation using proteasome inhibitor MG132 which blocks $I{\kappa}B{\alpha}$ degradation can sensitize lung cancer cells to TRAIL-induced apoptosis. Methods: A549 (wt p53) and NCI-H1299 (null p53) lung cancer cells were used and cell viability test was done by MTT assay. Apoptosis was confirmed with Annexin V assay followed by FACS analysis. To study $NF-{\kappa}B$-dependent transcriptional activation, a luciferase reporter gene assay was used after making A549 and NCI-H1299 cells stably transfected with IgG ${\kappa}-NF-{\kappa}B$ luciferase construct. To investigate DNA binding of $NF-{\kappa}B$ activated by TRAIL, electromobility shift assay was used and supershift assay was done using anti-p65 antibody. Western blot was done for the study of $I{\kappa}B{\alpha}$ degradation. Results: A549 and NCI-H1299 cells were relatively resistant to TRAIL-induced apoptosis showing only 20~30% cell death even at the concentration 100 ng/ml, but MG132 ($3{\mu}M$) pre-treatment 1 hour prior to TRAIL addition greatly increased cell death more than 80%. Luciferase assay showed TRAIL-induced $NF-{\kappa}B$ transcriptional activity in both cell lines. Electromobility shift assay demonstrated DNA binding complex of $NF-{\kappa}B$ activated by TRAIL and supershift with p65 antibody. $I{\kappa}B{\alpha}$ degradation was proven by western blot. MG132 completely blocked both TRAIL-induced $NF-{\kappa}B$ dependent luciferase activity and DNA binding of $NF-{\kappa}B$. Conclusion: This results suggest that inhibition of $NF-{\kappa}B$ can be a potentially useful strategy to enhance TRAIL-induced tumor cell killing in lung cancer.

• Journal of agricultural medicine and community health
• /
• v.41 no.1
• /
• pp.1-12
• /
• 2016

Objectives: In establishing policies for agricultural safety, evaluating injury burdens as well as investigating the rates and characteristics of work injury is important. This study investigated the types and characteristics of agricultural injury subjective burdens. Methods: By analyzing the injured farmers identified in the 2013 Korean Farmers' Occupational Injury Survey, the burdens caused by injuries were categorized using one direct cost item (medical costs) and five indirect cost items (including productivity decreases and wage increases). Statistical differences among the burden items were analyzed using logistic regression analysis according to the characteristics of the farmers and their farm injuries. Results: Among the subjective burdens indicated by the 457 injured farmers, disruption to work was most common. The major influences on each subjective burden item are as follows: for the item of disruption to work, age, time of injury occurrence, treatment period, and farming machine use were influential; for an increased family member's burden of farm works, the number of family members and treatment period were influential. Regarding cost burden of treatment, the results varied according to whether or not the patient was hospitalized and annual income. Conclusion: Subjective burdens induced by indirect costs rather than those induced by direct costs were found to be higher in ratio. In regard to each burden item, the results varied according to the characteristics of the farmers and their farm injuries. To support injured farmer, setting goals to reduce indirect cost burdens and preparing concrete methods is necessary.

• The Korean Journal of Emergency Medical Services
• /
• v.8 no.1
• /
• pp.87-104
• /
• 2004

This study selected the fifth and sixth graders of elementary school in Jeollanamdo who can express their opinions of safety consciousness and understand the items of questionnaire as the population. It selected 10 elementary schools under the supervision of Jeonnam Board of Education and sampled 700 students randomly from 2-3 classes in the 5th and the 6th grade. One preliminary survey was conducted to revise and complement the contents and forms of questionnaire with 70 students of a school from Apr. 1 to 6, 2004 and this study was conducted from Apr. 10 to 30, 2004. Data of this study were collected by explaining the purport of study to subjects after obtaining approval of principal and teacher of the school and distributing questionnaires. Total 700 questionnaires were distributed and 681 were collected (97%) and 602 were used for final analysis except 79 lacking responses. The results of this study are as follows. According to demographical characteristics of subjects, 'male' students were 302(50.%) and 'female' students were 300(49.8%) by sex and 'the 5th graders' were 285(47.3%) and 'the 6th graders' were 317(52.7%) in grade distribution. Residents at 'apartment house' were 406(67.4%) in residence type, 'going to school by foot' was 477 students(79.2%), 'high school graduates' were 297(49.3%) in fathers' education, 'high school graduates' were 366 (60.8%) in mothers' education, 'professional and office workers' were 231(38.4%) in fathers' job, 'full-time workers' were 283(47.0%) in mothers' job, and the number of siblings was one except myself in 343 students(57.0%). Respondents on the level of class showing 'good' were 340(56.5%) and those on the degree of adaptation to school life showing 'active' were 349(58.0%). On the characteristics related to safety education, 360(59.8%) responded it was 'very necessary', on the frequency of safety education at school for last one year, 339(56.3%) responded they had 'once or twice', on the frequency of safety education by parents, 279(46.3%) responded they 'often' had it, on the level of safety practice by parents, 347(57.6%) responded they practiced it 'frequently', on the source of knowledge of safety, 223(37.0%) responded they got it from 'parents, siblings and relatives', on the degree of recognizing the need of safety education textbooks, 295(38.5%) responded 'it was needed', on the recognition of necessity of teacher for safety education, 271(45.0%) answered it was very necessary', and on the recognition of qualification of teacher for safety education, 370(61.5%) answered it was 'paramedic'. The mean score of safety consciousness of subjects was 2.72 (SD. 21) of full score 3, having high score over mean score. According to each area, the area showing the highest safety consciousness was safety of fire(2.83), followed by home safety(2.76) and first-aid treatment(2.76), traffic safety(2.71), play and leisure safety(2.66) and school safety(2.56). Items showing statistical differences in the degree of safety consciousness according to demographical characteristics were sex(t=-3.11, p=.002), education(t=2.33, p=.021) and number of siblings(F=3.729, p=.011). In the difference of safety consciousness between both sexes, 'female' students(2.75) showed higher safety consciousness than 'male' students (2.69), and the former also showed higher safety consciousness than the latter in all six areas of school safety, play and leisure safety, traffic safety, fire safety, home safety and first-aid treatment, and there were statistical differences in the areas of play and leisure safety, traffic safety, fire safety and first-aid treatment. According to the differences of safety consciousness by grade, 'the fifth graders'(2.74) showed higher safety consciousness than 'the sixth graders'(2.70) and the former also showed higher safety consciousness than the latter in all six areas of school safety, play and leisure safety, traffic safety, fire safety, home safety and first-aid treatment, and there were statistical differences in the areas of fire safety and home safety. In the safety consciousness by the number of siblings, 'single son or daughter' (2.78) was highest and their safety consciousness was also highest in all six areas of school safety, play and leisure safety, traffic safety, fire safety, home safety and first-aid treatment, and there were statistical differences in the areas of school safety, fire safety and home safety, There were statistically remarkable differences in degree of adaptation to school life (F=15.349, p=.000) and perceived schooling level(F=9.552, p=.000). According to the degree of safety consciousness related to characteristics of safety education, there were statistical differences at the degree of recognizing the need of safety education(F=9.797, p=.000), degree of safety education at school(F=2.595, p=.006), degree of safety education by parents(F=12.709, p=.000), degree of practicing safety by parents(F=17.579, p=.000), source of knowledge of safety education (F=2,715, p=.044), necessity of safety education textbooks(F=3.972, p=.008), need of safety teacher(F=4.137, p=.006) and qualification standard of safety teacher(F=3.016, p=.029).

• Journal of the Korean earth science society
• /
• v.32 no.3
• /
• pp.276-293
• /
• 2011

In this study a modeling system consisting of Weather Research and Forecasting (WRF), Sparse Matrix Operator Kernel Emissions (SMOKE), the Community Multiscale Air Quality (CMAQ) model, and the CMAQ-Model of Aerosol Dynamics, Reaction, Ionization, and Dissolution (MADRID) model has been applied to estimate enhancements of $PM_{10}$ during Asian dust events in Korea. In particular, 5 experimental formulas were applied to the WRF-SMOKE-CMAQ (MADRID) model to estimate Asian dust emissions from source locations for major Asian dust events in China and Mongolia: the US Environmental Protection Agency (EPA) model, the Goddard Global Ozone Chemistry Aerosol Radiation and Transport (GOCART) model, and the Dust Entrainment and Deposition (DEAD) model, as well as formulas by Park and In (2003), and Wang et al. (2000). According to the weather map, backward trajectory and satellite image analyses, Asian dust is generated by a strong downwind associated with the upper trough from a stagnation wave due to development of the upper jet stream, and transport of Asian dust to Korea shows up behind a surface front related to the cut-off low (known as comma type cloud) in satellite images. In the WRF-SMOKE-CMAQ modeling to estimate the PM10 concentration, Wang et al.'s experimental formula was depicted well in the temporal and spatial distribution of Asian dusts, and the GOCART model was low in mean bias errors and root mean square errors. Also, in the vertical profile analysis of Asian dusts using Wang et al's experimental formula, strong Asian dust with a concentration of more than $800\;{\mu}g/m^3$ for the period of March 31 to April 1, 2007 was transported under the boundary layer (about 1 km high), and weak Asian dust with a concentration of less than $400\;{\mu}g/m^3$ for the period of 16-17 March 2009 was transported above the boundary layer (about 1-3 km high). Furthermore, the difference between the CMAQ model and the CMAQ-MADRID model for the period of March 31 to April 1, 2007, in terms of PM10 concentration, was seen to be large in the East Asia area: the CMAQ-MADRID model showed the concentration to be about $25\;{\mu}g/m^3$ higher than the CMAQ model. In addition, the $PM_{10}$ concentration removed by the cloud liquid phase mechanism within the CMAQ-MADRID model was shown in the maximum $15\;{\mu}g/m^3$ in the Eastern Asia area.

• The Journal of Korean Academy of Prosthodontics
• /
• v.42 no.5
• /
• pp.514-523
• /
• 2004

Statement of problem: All-ceramic restorations have been advocated for superior esthetics. Various post and core systems have been used to improve the strength of damaged teeth, but it is unclear whether they affect the final shade of finished all-ceramic restorations. Purpose: The influence of different types of post and core systems on light transmission through all-ceramic crowns was assessed by spectrophotometric analysis. Also the masking effect of different thickness of ceramic ingot was evaluated. Material and Methods : Forty-five sample disks (15mm in diameter) at several thickness(1.0, 1.5, 2.0mm) and value(shade 100, 200, 300) were made in heat pressed ceramic(IPS-Empress). Background specimens simulating gold-alloy cast posts(Type III casting gold alloy), metal posts(Ni-Cr casting alloy) and ceramic posts(CosmoPost) were fabrica-ted. Resin composite(Z250, A3 shade) was used as a tooth substrate reference. For each combination, the change in color was measured with a spectrophotometer. Readings were performed for 2 conditions (1) ability of ceramic to mask the core in relation to its thickness(1.0, 1.5, or 2.0mm) ; (2) influence of post and core types on the final color of the ceramic. Data were recorded according to the CIE $L^*a^*b^*$ systems and color difference($\Delta$E) was calculated. Results: 100 shade ingot: when ceramic thickness was 1.0mm, $\Delta$E value for ceramic post larger than 1 but $\Delta$E value for metal and gold post was larger than 2. For ceramic thickness of 1.5mm, only $\Delta$E value for metal was larger than 2, and the other samples' $\Delta$E value was smaller than 2. For ceramic thickness of 2.0mm, $\Delta$E values for all specimens was smaller than 2. 200 shade ingot: when ceramic thickness was 1.0mm, $\Delta$E value for ceramic post was smaller than 1 but $\Delta$E value for metal and gold post was larger than 2. For ceramic thickness of 1.5 mm, only the $\Delta$E value for metal was larger than 2, and the other samples' $\Delta$E value was smaller than 2. For ceramic thickness of 2.0mm, $\Delta$E values for all specimens was smaller than 1. 300 shade ingot: when ceramic thickness was 1.0mm, only $\Delta$E value for metal was larger than 2 and the other samples' $\Delta$E value was smaller than 2. For ceramic thickness of 1.5mm, $\Delta$E values for all specimens was smaller than 1. For ceramic thickness of 2.0mm, $\Delta$E values for all specimens was smaller than 1. Conclusion: The final esthetic result of the IPS-Empress glass-ceramic restoration was not affected by the presence of different core materials when the thickness was more than 2.0 mm. When ceramic thickness decreases to 1.5mm, it is advised to take the substrate aspects into consideration. If the ceramic thickness is less than 1.0mm, using the tooth color matched substrate is strongly recommended.