• Culinary science and hospitality research
• /
• v.22 no.8
• /
• pp.226-234
• /
• 2016

In this study, the possibility of developing new type of yanggaeng has been reviewed by evaluating physio-chemical and sensual characteristics of new yanggaeng products using 5~20% of powder of plantain that is a hardy plant resource from most of hillside in Korea. The moisture contents of plantain powder was 1.9%, DPPH radical scavenging ability was 15.67 mg/mL, and total polyphenol contents was 7.00mg/g. By increasing the adding rate of plantain powder the moisture contents and pH of yanggaeng were decreased. From chromatography, by increasing the adding rate of plantain powder the brightness, L-value was decreased along with redness, a-value, yellowness, and b-value. The a-value of sample group adding 5% of plantain powder was the highest and that of sample group adding 20% was the lowest (p<0.001). From texture measurement shown that the hardness of sample group adding 5% of plantain powder was the highest by 3,937.04 and that of sample group adding 20% of plantain powder was the lowest by 2,153.59. The springiness of sample group adding 5% of plantain powder was the highest by 6.79% and that of sample group adding 20% of plantain powder was the lowest by 4.76%. The cohesiveness of sample group adding 20% of plantain powder was the lowest by 177.35 and it was significant (p<0.001). The result of sensory test showed that sample group adding 10% of plantain powder achieved the highest appraisal from most factors, such as color, scent. sweetness, chewiness, moist level, softness level and total preference. As shown from the above results, the sensory preference of yanggaeng can be improved by adding proper volume of plantain powder while making it, so it is understood that the addition of plantain powder in making yanggaeng would give better possibility in commercialization. By considering sensory preference factor the 10% addition rate of plantain powder while making yanggaeng would be the most proper recipe.

• Tuberculosis and Respiratory Diseases
• /
• v.52 no.4
• /
• pp.395-404
• /
• 2002

Background : Surfactant protein A (SP-A) is important for regulating surfactant secretion, synthesis and recycling. However, It's regulation in vivo is unclear. SP-A has important roles in regulating surfactant metabolism as well as determining its physical properties. Glucocorticoid accelerates the morphologic differentiation of epithelial cells into type II cells and increase the rate of phosphatidylcholine synthesis. Methods : The authors investigated the effects of glucocorticoid on the accumulation of mRNA encoding SP-A and SP-A protein content. Adult rats were given various doses of subcutaneous dexamethasone and sacrificed after 24 hours and one week. SP-A mRNA was measured using a filter hybridization method. The lung SP-A protein content was determined using a double sandwich ELISA assay with polyclonal antiserum raised in rabbits against purified rat SP-A. Results : 1) The accumulation of SP-A mRNA in the dexamethasone treated group 24 hours after 0.2 mg/kg dexamethasone treatment was increased 38.8% compared to the control group. 2) The accumulation of SP-A mRNA in the dexamethasone treated group 1 week after 2 mg/kg dexamethasone treatment was 49.7% higher than the control group(P<0.01). 3) The total lung SP-A level was not altered after 24 hours by the 0.2mg/kg treatment. The total lung SP-A content one week after 2mg/kg dexamethasone administration was 373.7% higher than the control group(P<0.005). Conclusion : Dexamethasone treatment results in an increase in the SP-A mRNA and SP-A protein levels, suggesting that the pretranslational events in vivo may in part contribute to this process.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.15 no.1
• /
• pp.143-150
• /
• 2020

This research is intended to identify how office worker's recognition of strength affects the intention of starting a business when it is used as a medium for utilizing strength. The survey period was conducted for two months from January 17, 2019 to March 8, 2019. In order to achieve the object of this study, a significant number of employees have been collected nationwide, and 287 office workers were analyzed after collecting 300 questionaires, excluding 13 office workers who were not sincere. The significant data were analyzed by utilizing the structural equation and technical statistics and by verifying the conformity of structural model and measurement model and by investigating the relationship between variables. The results of this study are summarized as follows: First, employee's perception of strength has been found to have a significant effect on the utilizing of strength. Second, the use of workers' strengths has been found to have a significant effect on the intention of starting a business. Third, it has been confirmed that in the relationship between the employee's perception of strength and intention to start a business, the recognition of strength has a significant effect on the intention of starting a business only through the use of strength. Most office workers are nervous about the future and make various plans. The time to live after retirement is getting longer and jobs and working hours are shrinking at an alarming rate. According to the analysis on the status of small business owners in the mid-term of 2017 data, the average monthly operating profit of small business owners across the country is decreasing over the years, and most start-ups are subsistence-type start-ups, and they decide to start their own businesses because they have no other choice than start-ups. As the number of small business owners suffering from financial difficulties has increased since the financial crisis and insecurity of job is pushing those with financial difficulties after retirement to the battleground of the start-up market, the result of this research suggest that the workers need to recognize their own strength and enhance the importance of utilizing the strength.

• Journal of the Korean Society of Costume
• /
• v.24
• /
• pp.15-28
• /
• 1995

This thesis focuses on the study of costume and ornaments of Shilla which had been severely affected by Uighur, and those of Uighur in Uighur self-governing district located in Shin Kang. East Turkestan, in Centrals Asia. This study aims to identifty the way of intergration of Uighur's costume and ornaments into Shilla, and orgins of Shill's costume and ornaments which had amix of internationl elelemnts thoursh cross exchanges, by comparing the differences between the two, and at the same time to clarify the pedigree of Korean costume and ornaments which are said to be udner a severe Chinese influence, by highlingting its uniqueness and originality . The result of the study demonstrates and originality of SHilla by melting foreign cultures into its own style in the process of accepting them. This means that the Shilla has recreated them in t도 form of simplification, and added naturalistic abstratness which is an element of Norther culture. The costume and ornaments are divided into coronets men's costuem, women's costume, and accessories 1. Coroncts A horse-riding man, and the costume type of 유고제 착유지체형 tell the Northern culture's influence on 백화수피기마인물채화담립 and patterns of a lotus flowr and arabesque show the 백화수피기마인물채색답립 has an influence of Buddhism with cluture of bordering countries of Western China , The origin of 뱍회수피제안형건(원정형, 방정형) lies in Northern cultures which can be found in ancient tombs of the Huns in noin-Ila , and stone caves of Jizil in Kochang. The wall paintings in Alexandropol, Murutuk and 돈황 No. 409 cave show that 초화형입식계금관 is under the influence of Northern culture, and Bezerkrick No, 25 cave and 회 번 in Kocho also show 수목녹각형입식관 is under the influence of Northern culture, with its origin in Novecherkaask. In this regard, the transformed coroncts of Shilla has shows a blended culture of Shilla with Nothern, Chinese, and Western cultures. 2. Men's Costume 반령포 derives from cultures of bordering countries of Western China centering around Uighur and Turkey. 연주문 in Uighur prince's costume and in Uighur paintings of Central Asia were reflected into the arts of Shilla in a direct way, and the motive of Uighur was deviatelly expressed at Shilla's arts in the form of simplicity , and naturalistic abstract paintings as in shown at 입수쌍조문 in tiles and brick. Along with this , 고착지체형 costume originates from Eurasia's Northern horseriding costumes as was shown in a golden man in B.C.4-5C which is now possessed by Kazakstan Republic Academy Archelogy Center Museum, and a golden figure from Skitai ancient caves, an the origin is carried away into wall paintings of Kizil No.14. cave in 8c and Astana's early period ancient tomb. No.6. 3. Women's Costume The hair styles of Shilla people are either 변발 or up -style with a lot of hair around it whose origin can be seen in Astana No.216 and No.187 caves of Kochang and Uighur's wall paintings of royal princess's hair style. Astana's middle period No. 206 and No.230 tombs reveal the its origin of 고착장군 while Astana early period No. 6 tomb shows that of 광유풍만형. 4. Accessories The earrings with small golden beads is seen at earring of figure holding a sword in wall painting of figure holding a sword in wall painting of Kizil in about 5 C. and those of a offering people in Sorchuk wall paintings. The earrings with small golden beads originates from a golden pendant of Shivargan, Afganistan, and golden pendants and other golden and metal accessories from Chrioba ancient tombs in Skiti Critia peninsula. Shilla's costume derives from the costume style of horse-ridding man, which proves the fact that Shilla people are horse-ridding peoplewith excellent horse-ridding techniques, and traditions. The people of Shilla are from horse-ridding people of local mounted momads in Northern part of Siberia steppe and this origin of Northern culture had been carried into Uighur in East Turkestan. At the same time , Shilla has a wealth and power since it was rich in gold and iron , thus producing lots of materials made of them. The results of this study emphasizes Shilla's identity and self-control by creating an independent an innovative heterogeneous culture since Shill's active exchanges with East Asia allowed it to accept the most civilized Uighur culture in East Turkestan among Altai languate which had frequent cross contacts with India and Europe.

• Clinical and Experimental Pediatrics
• /
• v.51 no.9
• /
• pp.964-970
• /
• 2008

Purpose : Methylmalonic aciduria (MMA) and propionic aciduria (PA) are inborn errors in the catabolism of branched-chain amino acids. The study was undertaken to investigate the genotypes and clinical features of Korean patients with MMA and PA. Methods : This study examined 12 patients with MMA and eight with PA. We analyzed various clinical features, laboratory findings, treatments, and neuro-developmental outcomes. Diagnoses were based on the presence of characteristic compounds detected by amino acid analysis in serum and organic acid analysis in urine. Mutation analysis was performed in the genes of MUT, MMAA, MMAB, and MMACHC for MMA and PCCA and PCCB for PA. Results : Among the 20 patients, six patients were diagnosed before one month of age and nine patients were diagnosed after the newborn period. Five patients were diagnosed via a neonatal screening test. Patients with early-onset forms had more severe illness at presentation and generally poor outcomes. A favorable outcome was obtained in 55% patients; most of them were of a late-onset type or diagnosed by neonatal mass screening test without symptoms. Genotypes were confirmed in all patients with MMA. We detected 11 different mutations by MUT gene analysis in 10 patients, and three different mutations in MMACHC genes in two patients. PCCA and PCCB gene mutations were identified in 14 of the 16 alleles, in eight patients with PA. Conclusion : Organic aciduria is a fatal disease; however, better outcomes are expected whenever early diagnosis and prompt management are made possible. Mutation analysis is useful for confirming diagnoses and planning management strategies.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.23 no.3
• /
• pp.143-150
• /
• 2017

Effects of packaging methods for maintaining the shelf-life and postharvest quality of Korean chive (Allium tuberosum Rotter) usually called buchu in Korea was studied during fall season. Buchu, which has high moisture content and active metabolism after harvest, is characterized by the greater changes in quality during storage and distribution. It is usually packaged in paper box during distribution in domestic channel in Korea where the marketability ends within few days of harvest. In order to maintain the commercial quality of buchu, we tried to use inner film with or without absorbent paper in commercial paper box packaging. The 'Greenbelt' cultivar of buchu was harvested in october and packaged in corrugated paper box (A), in corrugated paper box with micro-perforated high density polyethylene (HDPE) film as inner material (B), a layer of absorbent paper both at the bottom and top of buchu in corrugated paper box (C) and a combination of HDPE film as inner material along with a layer of absorbent paper both at the bottom and top of buchu in corrugated paper box (D), and stored at $5^{\circ}C$ for up to 21 days. Several quality parameters such as fresh weight loss, respiration rate, color, chlorophyll content and sensory qualities were monitored during storage. When buchu was packaged only in paper box, the appearance and quality deteriorated rapidly through decay development thereby sample became unmarketable within 12 days. On the other hand, buchu packaged with inner HDPE film maintained its quality, good visual appearance and exhibited a longer period of marketable life compared to the samples stored in other treatments. However, the use of absorbent paper did not have any significant effect in maintaining quality of buchu. The uses of inner HDPE film was effective in reducing weight loss that resulted better visual appearance of buchu. Results suggest that the use of inner HDPE film in bulk type corrugated paper box packaging and storing at $5^{\circ}C$ could be the optimum condition for commercial storage of buchu. Further investigation on other quality parameters and packaging methods would be useful in maintaining the quality aspects of buchu at postharvest stages.

• Economic and Environmental Geology
• /
• v.12 no.1
• /
• pp.41-49
• /
• 1979

A literature review is made on the physical and chemical characteristics of clay minerals in acidic solutions from the mineralogical and hydrometallurgical viewpoints. Some of the important characteristics of clays are their ability to cation exchange, swelling, and incongruent dissolution in acidic solutions. Various clay minerals can take up metallic ions from solution via cation exchange mechanism. Generally, cation exchange capacity increases in the following order : kaolinite, halloysite, illite, vermiculite, and montmorillonite. In acidic solutions, the cation uptake such as copper by clay minerals is strongly inhibited by hydrogen and aluminum ions and thus is not economically significant factor for recovery of metals such as uranium and copper. In acidic solutions, the cation uptake is substial. Swelling is minimal at lower pH, possibly due to lattice collapse. Swelling may be controllable with montmorillonite type clays by exchanging interlayer sodium with lithium and/or hydroxylated aluminum species. The effect of add on clay minerals are : 1. Division of aggregates into smaller plates with increase in surface area and porosity. 2. Clay-acid reactions occur in the following order: (i) $H^+$ replacement of interlayer cations, (ii) removal of octahedral cations, such as Al, Fe, and Mg, and (iii) removal of tetrahedral Al ions. Acid attack initiates, around the edges of the clay particles and continued inward, leaving hydrated silica gel residue around the edges. 3. Reaction rates of (ii) and (iii) are pseudo-1st order and proportional to acid concentration. Rate doubles for every temperature increment of $10^{\circ}C$. Implications in in-situ leaching of copper or uranium with acid are : 1. Over the life span of the operation for a year or more, clays attacked by acid will leave silica gel. If such gel covers the surface of valuable mineral surfaces being leached, recovery could be substantially delayed. 2. For a copper deposit containing 0.5% each of clay minerals and recoverable copper, the added cost due to clay-acid reaction is about 1.5c/lb of copper (or 0.93 lbs of $H_2SO_4/1b$ of copper). This acid consumption by clay may be a factor for economic evaluation of in-situ leaching of an oxide copper deposit.

• Proceedings of the KOR-KST Conference
• /
• 1995.02a
• /
• pp.3-32
• /
• 1995

The Highway Capacity Manual specifies procedures for evaluating intersection performance in terms of delay per vehicle. What is lacking in the current methodology is a comparable quantitative procedure for ass~ssing the safety-based level of service provided to motorists. The objective of the research described herein was to develop a computational procedure for evaluating the safety-based level of service of signalized intersections based on the relative hazard of alternative intersection designs and signal timing plans. Conflict opportunity models were developed for those crossing, diverging, and stopping maneuvers which are associated with left-turn and rear-end accidents. Safety¬based level-of-service criteria were then developed based on the distribution of conflict opportunities computed from the developed models. A case study evaluation of the level of service analysis methodology revealed that the developed safety-based criteria were not as sensitive to changes in prevailing traffic, roadway, and signal timing conditions as the traditional delay-based measure. However, the methodology did permit a quantitative assessment of the trade-off between delay reduction and safety improvement. The Highway Capacity Manual (HCM) specifies procedures for evaluating intersection performance in terms of a wide variety of prevailing conditions such as traffic composition, intersection geometry, traffic volumes, and signal timing (1). At the present time, however, performance is only measured in terms of delay per vehicle. This is a parameter which is widely accepted as a meaningful and useful indicator of the efficiency with which an intersection is serving traffic needs. What is lacking in the current methodology is a comparable quantitative procedure for assessing the safety-based level of service provided to motorists. For example, it is well¬known that the change from permissive to protected left-turn phasing can reduce left-turn accident frequency. However, the HCM only permits a quantitative assessment of the impact of this alternative phasing arrangement on vehicle delay. It is left to the engineer or planner to subjectively judge the level of safety benefits, and to evaluate the trade-off between the efficiency and safety consequences of the alternative phasing plans. Numerous examples of other geometric design and signal timing improvements could also be given. At present, the principal methods available to the practitioner for evaluating the relative safety at signalized intersections are: a) the application of engineering judgement, b) accident analyses, and c) traffic conflicts analysis. Reliance on engineering judgement has obvious limitations, especially when placed in the context of the elaborate HCM procedures for calculating delay. Accident analyses generally require some type of before-after comparison, either for the case study intersection or for a large set of similar intersections. In e.ither situation, there are problems associated with compensating for regression-to-the-mean phenomena (2), as well as obtaining an adequate sample size. Research has also pointed to potential bias caused by the way in which exposure to accidents is measured (3, 4). Because of the problems associated with traditional accident analyses, some have promoted the use of tqe traffic conflicts technique (5). However, this procedure also has shortcomings in that it.requires extensive field data collection and trained observers to identify the different types of conflicts occurring in the field. The objective of the research described herein was to develop a computational procedure for evaluating the safety-based level of service of signalized intersections that would be compatible and consistent with that presently found in the HCM for evaluating efficiency-based level of service as measured by delay per vehicle (6). The intent was not to develop a new set of accident prediction models, but to design a methodology to quantitatively predict the relative hazard of alternative intersection designs and signal timing plans.

• Korean Journal of Soil Science and Fertilizer
• /
• v.37 no.4
• /
• pp.199-206
• /
• 2004

Factors of universal soil loss equation, USLE, and its revised version, RUSLE for Korean soils were reevaluated to estimate the national scale of soil loss based on digital soil maps. Rainfall erosivity factor, R, of 158 locations of cities and counties were spacially interpolated by the inverse distance weight method. Soil erodibility factor, K, of 1321 soil phases of 390 soil series were calculated using the data of soil survey and agri-environmental quality monitoring. Topographic factor, LS, was estimated using soil map of 1:25,000 scale with soil phase and land use type. Cover management factor, C, of major crops and support practice factor, P, were summarized by analyzing the data of lysimeter and field experiments for 27 years (1975-2001) in the National Institute of Agricultural Science and Technology. R factor varied between 2322 and 6408 MJ mm $ha^{-1}$ $yr^{-1}$ $hr^{-1}$ and the average value was 4276 MJ mm $ha^{-1}$ $yr^{-1}$ $hr^{-1}$. The average K value was evaluated as 0.027 MT hr $MJ^{-1}$ $mm^{-1}$. The highest K factor was found in paddy rice fields, 0.034 MT hr $MJ^{-1}$ $mm^{-1}$, and K factors in upland fields, grassland, and forest were 0.026, 0.019, and 0.020 MT hr $MJ^{-1}$ $mm^{-1}$, respectively. C factors of upland crops ranged from 0.06 to 0.45 and that of grassland was 0.003. P factor varied between 0.01 and 0.85.

• The Journal of Korean Academy of Prosthodontics
• /
• v.42 no.5
• /
• pp.514-523
• /
• 2004

Statement of problem: All-ceramic restorations have been advocated for superior esthetics. Various post and core systems have been used to improve the strength of damaged teeth, but it is unclear whether they affect the final shade of finished all-ceramic restorations. Purpose: The influence of different types of post and core systems on light transmission through all-ceramic crowns was assessed by spectrophotometric analysis. Also the masking effect of different thickness of ceramic ingot was evaluated. Material and Methods : Forty-five sample disks (15mm in diameter) at several thickness(1.0, 1.5, 2.0mm) and value(shade 100, 200, 300) were made in heat pressed ceramic(IPS-Empress). Background specimens simulating gold-alloy cast posts(Type III casting gold alloy), metal posts(Ni-Cr casting alloy) and ceramic posts(CosmoPost) were fabrica-ted. Resin composite(Z250, A3 shade) was used as a tooth substrate reference. For each combination, the change in color was measured with a spectrophotometer. Readings were performed for 2 conditions (1) ability of ceramic to mask the core in relation to its thickness(1.0, 1.5, or 2.0mm) ; (2) influence of post and core types on the final color of the ceramic. Data were recorded according to the CIE $L^*a^*b^*$ systems and color difference($\Delta$E) was calculated. Results: 100 shade ingot: when ceramic thickness was 1.0mm, $\Delta$E value for ceramic post larger than 1 but $\Delta$E value for metal and gold post was larger than 2. For ceramic thickness of 1.5mm, only $\Delta$E value for metal was larger than 2, and the other samples' $\Delta$E value was smaller than 2. For ceramic thickness of 2.0mm, $\Delta$E values for all specimens was smaller than 2. 200 shade ingot: when ceramic thickness was 1.0mm, $\Delta$E value for ceramic post was smaller than 1 but $\Delta$E value for metal and gold post was larger than 2. For ceramic thickness of 1.5 mm, only the $\Delta$E value for metal was larger than 2, and the other samples' $\Delta$E value was smaller than 2. For ceramic thickness of 2.0mm, $\Delta$E values for all specimens was smaller than 1. 300 shade ingot: when ceramic thickness was 1.0mm, only $\Delta$E value for metal was larger than 2 and the other samples' $\Delta$E value was smaller than 2. For ceramic thickness of 1.5mm, $\Delta$E values for all specimens was smaller than 1. For ceramic thickness of 2.0mm, $\Delta$E values for all specimens was smaller than 1. Conclusion: The final esthetic result of the IPS-Empress glass-ceramic restoration was not affected by the presence of different core materials when the thickness was more than 2.0 mm. When ceramic thickness decreases to 1.5mm, it is advised to take the substrate aspects into consideration. If the ceramic thickness is less than 1.0mm, using the tooth color matched substrate is strongly recommended.