• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.76.2-76
• /
• 2002

Because of the wheeled mobile robot is modeled by nonlinear system framework and controlled by nonlinear algorithms or fuzzy algorithms, the treatment of wheeled mobile robot is very complecate and conservative. In this paper, a new model of two wheeled mobile robot, which is a type of linear system and treated easily, is presented. And we will show that the control algorithms based on the linear system theory is well work to the wheeled mobile robot by simulation and experiment.

• 전기학회논문지P
• /
• 제53권4호
• /
• pp.201-204
• /
• 2004

In this paper, a direct adaptive tracking controller based Lyapunov method is designed for a wheeled mobile robots. A wheeled mobile robots have three degrees of freedom and two control variables. Therefore, it is difficult to control a mobile robot using the general linear control. We introduce two kinds of Lyapunov function for the design of the controller and verify the controller. A mobile robots using the designed adaptive direct tracking controller is well-behaved and is easily implemented.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 D
• /
• pp.2472-2474
• /
• 2002

This paper describe a trajectory generation method for a two-wheeled mobile robot using cubic Bezier curve. It is proposed that the method to determine the location of control points which mainly affect the shape of curve, and constrains for two-wheeled mobile are examined. Simulation results show its traceability of the trajectory of mobile robot.

• 한국지능시스템학회논문지
• /
• 제20권5호
• /
• pp.652-658
• /
• 2010

본 논문에서는 밸런싱 메커니즘의 두 바퀴 형태의 이동로봇(Two Wheeled Mobile Robot:TWMR)을 구현하고 제어한다. TWMR은 역진자 시스템과 이동로봇을 합친 모바일 역진자 구조로 기존의 막대 형태의 진자대신 두 팔 달린 로봇 형태를 나타낸다. 각도와 위치에 대한 동시제어에 있어 외란에 대한 강건성을 부여하기 위해 RBF 신경회로망 제어 방식을 사용한다. 신경회로망 제어 방식으로는 입력보상 방식(RCT)을 사용하여 제어기의 성능을 실험을 통해 검증한다. 또한 원격으로 제어가능하게 하도록 시스템을 구현하여 실험하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제23권6호
• /
• pp.731-737
• /
• 1999

This paper describes the path tracking control for a mobile robot which has two casters at the front and rear to keep balance and two driving wheels on the left and right sides of its body. Power wheeled steering method is adapted to control heading of the robot. It is very difficult to find appropriate feedback gains when linear regulator control scheme is adapted to path tracking con-trol of this type of robot. Therefore in this paper we propose the path tracking control algorithm using the fuzzy logic control scheme for this type of root. Simulation to prove the validity of the proposed two algorithms is performed. The results are reported as last part in this paper.

• 제어로봇시스템학회논문지
• /
• 제14권8호
• /
• pp.800-808
• /
• 2008

This paper presents a localization algorithm of the outdoor wheeled mobile robot using the sensor fusion method based on indirect Kalman filter(IKF). The wheeled mobile robot considered with in this paper is approximated to the two wheeled mobile robot. The mobile robot has the IMU and encoder sensor for inertia positioning system and GPS. Because the IMU and encoder sensor have bias errors, divergence of the estimated position from the measured data can occur when the mobile robot moves for a long time. Because of many natural and artificial conditions (i.e. atmosphere or GPS body itself), GPS has the maximum error about $10{\sim}20m$ when the mobile robot moves for a short time. Thus, the fusion algorithm of IMU, encoder sensor and GPS is needed. For the sensor fusion algorithm, we use IKF that estimates the errors of the position of the mobile robot. IKF proposed in this paper can be used other autonomous agents (i.e. UAV, UGV) because IKF in this paper use the position errors of the mobile robot. We can show the stability of the proposed sensor fusion method, using the fact that the covariance of error state of the IKF is bounded. To evaluate the performance of proposed algorithm, simulation and experimental results of IKF for the position(x-axis position, y-axis position, and yaw angle) of the outdoor wheeled mobile robot are presented.

• Journal of Mechanical Science and Technology
• /
• 제18권8호
• /
• pp.1288-1296
• /
• 2004

Wall-following control problem for a mobile robot is to move it along a wall at a constant speed and keep a specified distance to the wall. This paper proposes wall-following controllers based on Lyapunov function candidate for a two-wheeled mobile robot (MR) to follow an unknown wall. The mobile robot is considered in terms of kinematic model in Cartesian coordinate system. Two wall-following feedback controllers are designed: full state feedback controller and observer-based controller. To design the former controller, the errors of distance and orientation of the mobile robot to the wall are defined, and the feedback controller based on Lyapunov function candidate is designed to guarantee that the errors converge to zero asymptotically. The latter controller is designed based on Busawon's observer as only the distance error is measured. Additionally, the simulation and experimental results are included to illustrate the effectiveness of the proposed controllers.

• Journal of Mechanical Science and Technology
• /
• 제18권7호
• /
• pp.1094-1106
• /
• 2004

In this paper, a nonlinear controller based on sliding mode control is applied to a two-wheeled Welding Mobile Robot (WMR) to track a smooth curved welding path at a constant velocity of the welding point. The mobile robot is considered in terms of dynamics model in Cartesian coordinates under the presence of external disturbance, and its parameters are exactly known. It is assumed that the disturbance satisfies the matching condition with a known boundary. To obtain the controller, the tracking errors are defined, and the two sliding surfaces are chosen to guarantee that the errors converge to zero asymptotically. Two cases are to be considered: fixed torch and controllable torch. In addition, a simple way of measuring the errors is introduced using two potentiometers. The simulation and experiment on a two-wheeled welding mobile robot are provided to show the effectiveness of the proposed controller.

• 제어로봇시스템학회논문지
• /
• 제8권6호
• /
• pp.498-505
• /
• 2002

Reducing odometer errors caused by kinematic imperfections in wheeled mobile robots is imestigated. Wheel diameters and wheelbase are corrected by using encoders without landmarks. A new velocity trajectory is proposed that compensates for an orientation error due to acceleration- resolution constraints on motor controllers. Based on this velocity trajectory, the wheel velocity of one out of two driven wheels may be changed by the traveled distance of the mobile robot. It is shown that a wheeled mobile robot can't move along a straight line exactly, even if kinematic correction are achieved perfectly, and this phenomenon is attributable to acceleration-resolution constraints on motor controllers. We experiment on a wheeled mobile robot with 2 d.o.f. are used in the experiment to verify the proposed scheme.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.67.6-67
• /
• 2001

In this paper, we present an attitude control of self-standing for a two-wheeled inverted-pendulum-like mobile robot based on the nonlinear control theory. Nonlinear dynamic equations are linearized by using the Lie derivative, and a pole placement controller is designed. Characteristics of the controller are examined by numerical simulations to show the self-standing attitude of the mobile robot in standing and in moving.