• 헤리티지:역사와 과학
• /
• 제48권2호
• /
• pp.120-141
• /
• 2015

본 연구는 조선시대 성곽 축성의 기술적 변화 가운데 하나인 장대를 중심으로, 장대의 건축적 특성을 시론적으로 고찰한 연구이다. 장대는 장수의 지휘시설 및 장졸들의 훈련시설로 성내에 마련된 건물이다. 장대가 최초로 건립된 시기는 불분명하지만 18세기를 전후로 하여 그 수가 급격히 증가하였다. 이는 왜란과 호란을 거치며, 장대의 실효성에 대한 인식이 대대적인 축성사업에 적용되면서 나타난 결과이다. 장대는 조망의 기능이 최우선시 되었기 때문에 높은 지형에 개방적인 형태로 설치되었다. 또한 강변 경사지에 위치한 읍성 누각의 높고 개방적인 형태는 내부에서의 유관(遊觀)과 더불어 장대의 기능을 병행할 수 있었다. 또한 장대는 병사들의 교련과 사열이 이루어지는 장소였기 때문에 병사들을 소집하기 위한 넓은 대(臺)가 전면에 구성된다. 이러한 특징은 조선시대 장대의 공간구성에서 정형화된 형식으로 나타나며, 지형적인 제약으로 인해 넓은 공간이 확보될 수 없는 곳은 대의 형태만을 갖추었다. 한편, 장대에는 지휘관이 위치하는 장소로서의 위계성이 다양한 건축적 특성으로 나타난다. 높이차를 통해 지휘관의 공간에 위계성이 부여되고, 건물의 격을 높이고자 여러 장식적인 요소들이 가미되었다. 장대 건물의 평면은 크게 장방형과 정방형으로 구분되는데, 장방형 평면은 건물의 규모에 따라 $5{\times}4$칸과 $3{\times}2$칸이 일반적이다. 이 중 $5{\times}4$칸의 건물은 넓은 공간을 활용할 수 있는 평지성이나 읍성에서 나타나며, 비교적 소규모인 $3{\times}2$칸은 주로 산성에서 나타난다. 정방형 평면의 건물은 모두 $3{\times}3$칸의 형태를 가지며, 어칸 길이는 협칸의 약 두 배가 되어, 내부 중앙칸이 넓게 마련된다. 이는 내부 중앙칸이 상층의 바닥 면적이 되기 때문에 상층의 내부 공간을 확보하기 위한 의도로 파악된다. 장대의 일부는 내부에 층을 두어 상부공간을 구성한다. 하층이 개방되고 상하층에 처마를 달아낸 중층누각형식은 장대에서 나타나는 중요한 건축특징 중 하나이다. 이러한 건물들은 하층의 내진주가 그대로 연장되어 상층의 변주가 되는 온칸물림방식을 보여주며, 내진주에 멍에창방을 끼우고, 귀틀을 결구하여 상층마루를 구성하였다. 또한 읍성에 위치한 누각은 상부에만 지붕이 구성되어 중층이라고 할 수는 없지만, 높은 누하주를 세우고 상부에 청방을 결구하여 상층마루를 구성하였다.

• Structural Engineering and Mechanics
• /
• 제82권6호
• /
• pp.735-745
• /
• 2022

The suspension thyristor valve can generate tremendous vertical acceleration responses in layers and large tension forces in hangers. A shaking table test of a scaled-down model of thyristor valves suspended on a hall building is performed to qualify the risk of vertical uplift of two representative types of valves, the chain valve and the rigid valve. Besides, an analytical model is established to investigate the source of the slackening of hangers. The test results show that the valves frequently experience a large vertical acceleration response. The soft spring joint can significantly reduce acceleration, but is still unable to prevent vertical uplift of the chain valve. The analytical model shows a stiffer roof and inter-story connection both contribute to a higher risk of vertical uplift for a rigid valve. In addition, the planar eccentricity and short hangers, which result in torsional motion of the valve, increase the possibility of vertical uplift for a chain valve. Therefore, spring joints with additional viscous dampers and symmetric layout in each layer are recommended for the rigid and chain valve, respectively, to prevent the uplift of valves.

• 한국농촌건축학회논문집
• /
• 제24권2호
• /
• pp.21-28
• /
• 2022

Focusing on the creation of a new han ok, especially a mid-rise hybrid-structured Han-ok, this study proposes a middle-rise (four-story) Han-ok on one and two lots located in Seoun-dong, the existing Han-ok intensive housing site in downtown Cheongju. 1) In terms of layout and function, according to the existing L-shaped Han-ok corresponding to the road and the direction, the parking lots and shops on the 1st floor, the business facility on the 2nd floor, the Han-ok on the 3rd and 4th floors are placed. There are yards, open roof yards, and semi-open Daecheong(大廳, main hall), which can be shared by residents. 2) In terms of structure and form, one or two floors (some 3 floors) are 5.4m square and 5.4×6.6m modules of the RC(Reinforced Concrete) group, and the upper floor reflects the 2.7m module, size and shape of the existing Han-ok. By extending the outer wall of the RC group in the lower floors (1st to 3rd floors) to the wooden exterior of the upper floors (2nd to 4th floors), it is attempted to avoid the awkward appearance of the RC group being exposed to wooden structures. And it is also attempted to reflect the wooden shape and design elements through the elevation elements such as horizontal windows, corner windows, picture frames, and vertical slits. 3) In environmental control and facilities, it is attempted to smooth the ventilation of the building by forming a vertical upward airflow from the dark space of the low floor to the positive of the upper floor. This doubles the effect through a vertical rise of cold air generated in a narrow alleyway, piloti parking lot, and the various voids. In addition to the Daecheong and Numaru(loft) of Han ok, the rooftop yard, the terrace, and the balcony, horizontal natural ventilation is generated through divided doors and transom windows.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.157-171
• /
• 2009

A 151 storey super high-rise building located in an area of reclaimed land constructed over soft marine clay in Songdo, Korea is currently under design. This paper describes the design process of the foundation system of the supertall tower, which is required to support the large building vertical and lateral loads and to restrain the horizontal displacement due to wind and seismic forces. The behaviour of the foundation system due to these loads and foundation stiffness influence the design of the building super structure, displacement of the tower, as well as the raft foundation design. Therefore, the design takes in account the interactions between soil, foundation and super structure, so as to achieve a safe and efficient building performance. The site lies entirely within an area of reclamation underlain by up to 20m of soft to firm marine silty clay, which overlies residual soil and a profile of weathered rock. The nature of the foundation rock materials are highly complex and are interpreted as possible roof pendant metamorphic rocks, which within about 50m from the surface have been affected by weathering which has reduced their strength. The presence of closely spaced joints, sheared and crushed zones within the rock has resulted in deeper areas of weathering of over 80m present within the building footprint. The foundation design process described includes the initial stages of geotechnical site characterization using the results of investigation boreholes and geotechnical parameter selection, and a series of detailed two- and three-dimensional numerical analysis for the Tower foundation comprising over 172 bored piles of varying length. The effect of the overall foundation stiffness and rotation under wind and seismic load is also discussed since the foundation rotation has a direct impact on the overall displacement of the tower.