• Wind and Structures
• /
• v.35 no.3
• /
• pp.177-191
• /
• 2022

Trains emerging on a streamlined bridge-girder may have salient interference effects on the aerodynamic properties of the bridge. The present paper aims at investigating these interferences by wind tunnel measurements, covering surface pressure distributions, near wake profiles, and flow visualizations. Experimental results show that the above interferences can be categorized into two primary effects, i.e., an additional angle of attack (AoA) and an enhancement in flow separation. The additional AoA effect is demonstrated by the upward-moved stagnation point of the oncoming flow, the up-shifted global symmetrical axis of flow around the bridge-girder, and the clockwise-deflected orientation of flow approaching the bridge-girder. Due to this additional AoA effect, the two critical AoAs, where flow around the bridge-girder transits from trailing-edge vortex shedding (TEVS) to impinging leading-edge vortices (ILEV) and from ILEV to leading-edge vortex shedding (LEVS) of the bridge-girder are increased by 4° with respect to the same bridge-girder without trains. On the other hand, the underlying flow physics of the enhancement in flow separation is the large-scale vortices shedding from trains instead of TEVS, ILEV, and LEVS governed the upper half bridge-girder without trains in different ranges of AoA. Because of this enhancement, the mean lift and moment force coefficients, all the three fluctuating force coefficients (drag, lift, and moment), and the aerodynamic span-wise correlation of the bridge-girder are more significant than those without trains.

• Journal of Korean Neurosurgical Society
• /
• v.67 no.2
• /
• pp.166-176
• /
• 2024

Objective : Three-dimensional (3D) printing in vascular surgery is trending and is useful for the visualisation of intracranial aneurysms for both surgeons and trainees. The 3D models give the surgeon time to practice before hand and plan the surgery accordingly. The aim of this study was to examine the effect of preoperative planning with 3D printing models of aneurysms in terms of surgical time and patient outcomes. Methods : Forty patients were prospectively enrolled in this study and divided into two groups : groups I and II. In group I, only the angiograms were studied before surgery. Solid 3D modelling was performed only for group II before the operation and was studied accordingly. All surgeries were performed by the same senior vascular neurosurgeon. Demographic data, surgical data, both preoperative and postoperative modified Rankin scale (mRS) scores, and Glasgow outcome scores (GOS) were evaluated. Results : The average time of surgery was shorter in group II, and the difference was statistically significant between the two groups (p<0.001). However, no major differences were found for the GOS, hospitalisation time, or mRS. Conclusion : This study is the first prospective study of the utility of 3D aneurysm models. We show that 3D models are useful in surgery preparation. In the near future, these models will be used widely to educate trainees and pre-plan surgical options for senior surgeons.

• Advances in nano research
• /
• v.17 no.4
• /
• pp.385-399
• /
• 2024

NEMS (Nano-Electro-Mechanical Systems) devices play a significant role in the advancement of prosthetic hands due to their unique properties at the nanoscale. Their integration enhances the functionality, sensitivity, and performance of prosthetic limbs. Understanding the electro-thermal buckling behavior of such structures is crucial since they may be subjected to extreme heat. So, in this paper, the two-dimensional hyperbolic differential quadrature method (2D-HDQM) integrated with a four-variable refined quasi-3D tangential shear deformation theory (RQ-3DTSDT) in view of the trace of thickness stretching is extended to study electro-thermal buckling response of three-directional poroelastic FG (3D-PFG) circular sector nanoplate patched with piezoelectric layer. Aimed at discovering the real governing equations, coupled equations with the aid of compatibility conditions are employed. Regarding modeling the size-impacts, nonlocal refined logarithmic strain gradient theory (NRLSGT) with two variables called nonlocal and length scale factors is examined. Numerical experimentation and comparison are used to indicate the precision and proficiency related to the created procedure. After obtaining the outputs of the mathematics, an appropriate dataset is used for testing, training and validating of the artificial intelligence. In the results section will be discussed the trace associated with multiple geometrical and physical factors on the electro-thermal buckling performance of the current nanostructure. These findings are essential for the design and optimization of NEMS applications in various fields, including sensing, actuation, and electronics, where thermal stability is paramount. The study's insights contribute to the development of more reliable and efficient NEMS devices, ensuring their robust performance under varying thermal conditions.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.30 no.4
• /
• pp.543-549
• /
• 1997

The problems in the existing modeling rules for fishing nets, especially in the Tauti's rule which had been used most commonly, were investigated and it was found that the rules could not give a good similarity between the prototype and model nets because they din neither analyze the flow resistance of nets accurately nor decide the ratio of flow velocity between the two nets properly. Thus, the modeling rule was newly derived by regarding the nets as holey structures sucking water into their mouth and then filtering water through their meshes as in the previous paper. The similarity conditions obtained, between the two nets distinguished by subscript 1 and 2, are as follows; $$\frac{d_2}{d_1}=\sqrt{\frac{l_2}{l_1}},\;\frac{N_2}{N_1}=(\frac{d_1}{d_2})^{1.5}\frac{L_2}{L_1},\;\varphi_1=\varphi_2,\;\frac{d_{r2}}{d_{r1}}=\sqrt{\frac{L_2{(\rho_{r1}-\rho_{w1})}}{{L_1{(\rho_{r2}-\rho_{w2})}}$$ $$\frac{N_{a2}}{N_{a1}}=\frac{W_{a1}}{W_{a2}}(\frac{L_2}{L_1})^2,\;\nu_1=\nu_2\;and\;\frac{R_2}{R_1}=(\frac{L_2}{L_1})^2$$, where L is the length of nettings, d the diameter of netting twines, 2l the mesh size, $2\varphi$ the angle between two adjacent bars, N the number of meshes at the sides of nettings, $d_r$, the diameter of ropes, $\rho_r$, the specific gravity of ropes, $W_a$ the weight in water of one piece of float or sinker, $N_a$ the number of floats or sinkers, $\nu$ the flow velocity, and R the flow resistance of net. In the case where the model experiments aim at investigating the influence of weight in water of nettings on their shapes in nets subjected to the water flow of very low velocity, however, the following condition is added; $$\frac{\rho_2-\rho_{w2}}{\rho_1-\rho_{w1}}=\frac{d_1}{d_2}$$ where $\rho$ is the specific gravity of netting twines.

• Journal of the Korean Institute of Landscape Architecture International Edition
• /
• no.2
• /
• pp.81-87
• /
• 2004

The objective of our research was an international comparison focusing on studies conducted on parks and green spaces undertaken in Japan and Korea. We also aim to clarify the similarities and differences between the two countries and consider the key features of the researches on the field of landscape architecture. We compared the recent trends of Japanese institute with Korean observed in the theme of research papers adopt title of them. The research period spanned approximately twenty years, from 1980 to 2003. We employed the Table of Contents information search system to research academic journal articles and to select the journals that included articles with the key words [park(s)] or [green space(s)] in their title. We chronologically arranged the journals for each country, based on the total number of journals and classification categories. We then conducted a comparative examination among the two countries. We also contributed information on the circumstances behind the formulation or amendment of some policies and laws and we checked the results against the research trend. Among the selected journals, the number of papers was the highest by the Institute of Landscape Architecture. But the reason for increase of the number of papers on green spaces in Japanese journals was not published by the Institute of Landscape Architecture but by the City Planning Institute and the Architecture Institute. In Japan, the papers on parks categorized under historical study were the highest among all categories. On the other hand, in Korean journals, papers on parks categorized under historical study were few. A similar trend was recognized in papers on green spaces. Every society is concerned with the study of function and effect. However, some exact differences have been observed by category classification. In Japan, the percentage of function and effect papers on parks was less than those on green spaces. In Korea, both percentages for these groups were high. The category of system and policy accounted for $17\%$ of the papers on green spaces in Korea. This result was higher than the number of papers on green spaces and parks in Japan and parks in Korea. Recently, the number of papers focusing on large-scale green space system has decreased in Japan. The trend in the study of parks and green spaces on a regional scale or at an individual level will be closely monitored. Systems and modeling studies have been focusing in Korea. The understanding between the administration and the citizens was peculiar to each country.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.1 no.2
• /
• pp.17-29
• /
• 1997

Single-mode spectral analysis method is usually applied to a small-scale bridges with the simple geometric shape and uses only fundamental period to estimate the elastic earthquake forces and the displacements of the substructure. On the other hand, multi-mode spectral analysis method may be used instead if the possibilities of potential damage are developed when considering significance, scale, and geometric shape of briages. Since the dynamic responses of bridge can be significantly different depending on the modeling techniques for the restraint and support conditions etc, it may be misled to the unexpected results. In this study the dynamic analysis program which can model and analyze the bridge as a two- or three-dimensional framed structure is developed and verified with the results of other reliable program. Using this program together with the post processor, the designer can easily and readily obtain the reponses(moments, base shears, and displacements)of bridges necessary to design purpose. And further from the analysis results according to the variations of type, scale, and restraint and supprot conditions of bridges including sectional properties, applications of the effective and desirable seismic design are presented.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.27 no.2
• /
• pp.79-93
• /
• 2015

Three-dimensional structures of large ocean rings in the Gulf Stream region are investigated using the HYbrid Coordinate Ocean Model (HYCOM). Numerically simulated flow structures around four selected cyclonic and anticyclonic rings are compared with two different horizontal resolutions: $1/12^{\circ}$ and $1/48^{\circ}$. The vertical distributions of Lagrangian Coherent Structures (LCSs) are analyzed using Finite Size Lyapunov Exponent (FSLE) and Okubo-Weiss parameters (OW). Curtain-shaped FSLE ridges are found in all four rings with extensions of surface ridges throughout the water columns, indicating that horizontal stirring is dominant over vertical motions. Near the high-resolution rings, many small-scale flow structures with size O(1~10) km are observed while these features are rarely found near the low-resolution rings. These small-scale structures affect the flow pattern around the rings as flow particles move more randomly in the high-resolution models. The dispersion rates are also affected by these small-scale structures as the relative horizontal dispersion coefficients are larger for the high-resolution models. The absolute vertical dispersion rates are, however, lower for the high-resolution models, because the particles tend to move along inclined eddy orbits when the resolution is low and this increases the magnitude of absolute vertical dispersion. Since relative vertical dispersion can reduce this effect from the orbital trajectories of particles, it gives a more reasonable magnitude range than absolute dispersion, and so is recommended in estimating vertical dispersion rates.

• Korean Chemical Engineering Research
• /
• v.46 no.5
• /
• pp.922-930
• /
• 2008

The selective non-catalytic reduction(SNCR) performance is sensitive to the process parameters such as flow velocity, reaction temperature and mixing of reagent(ammonia or urea) with the flue gases. Therefore, the knowledge of the velocity field, temperature field and species concentration distribution is crucial for the design and operation of an effective SNCR injection system. In this work, a full-scale two-dimensional computational fluid dynamics(CFD)-based reacting model involving a droplet model is built and validated with the data obtained from a pilot-scale urea-based SNCR reactor installed with a 150 kW LPG burner. The kinetic mechanism with seven reactions for nitrogen oxides($NO_x$) reduction by urea-water solution is used to predict $NO_x$ reduction and ammonia slip. Using the turbulent reacting flow CFD model involving the discrete droplet phase, the CFD simulation results show maximum 20% difference from the experimental data for NO reduction. For $NH_3$ slip, the simulation results have a similar tendency with the experimental data with regard to the temperature and the normalized stoichiometric ratio(NSR).

• Journal of Korean Society for Atmospheric Environment
• /
• v.29 no.5
• /
• pp.553-573
• /
• 2013

This paper aims to give a summary and review of the research trend about subjects of Asian Dust (AD) storm in the last three decades. The AD research was focused on classification of synoptic scale data and finding inflow pathway in early stage. Recently, new approaches have been made to explain chemical composition, transportation, transboundary movement reaction of AD, using satellite data, 3D modeling, the aerosol time of flight mass spectroscopy, etc. During AD events, a large amount of dust particles flow into Korea and Japan from AD source areas, and they are highly likely to be mixed with toxic substances when air mass contained AD particles pass over seriously polluted areas. We concluded that, considering that AD events were classified into two cases according to the source area and pathway, the concentrations of crustal components did not increase at the initial stage of AD events, Whereas ammonium-sulfate, trace metal element, OC, EC relatively increased in the early stage. This explains AD events have the possibility of being accompanied with polluted air mass or particles. Also, we further need to compare and summarize the results of AD studies which already have been conducted, and prepare strategies for particle management, particularly for Black Carbon (BC) and Brown Carbon (BrC) which are considered to induce climate change effects.

• Journal of Institute of Control, Robotics and Systems
• /
• v.2 no.2
• /
• pp.88-95
• /
• 1996

It is inevitable for local systems to have deviations which represent interactions and modeling errors originated from the decomposition process of a large scale system. This paper presents a decentralized control scheme for interconnected systems using local linear models and a neuro-coordinator. In the proposed method, the local system is composed of a linear model and unknown deviations caused by linearizing the subsystems around operating points or by estimating parameters of the subsystems. Because the local system has unmeasurable deviations we define a local reference model which consists of a local linear model and a neural network to estimate the deviations indirectly. The reference model is reformed into a linear model which has no deviations through a transformation of input variables and we obtain an optimum feedback control law which minimizes a local performance index. Finally, we derive a decentralized feedback control law which consists of local linear states and neural network outputs. In the decentralized control, the neuro-coordinator generates a corrective control signal to cancel the effect of deviations through backpropagation learning with the errors obtained from the differences of the local system outputs and reference model outputs. Also, the stability of local system is proved by the degree of learning of the neural network under an assumption on a neural network learning index. It is shown by computer simulations that the proposed control scheme can be applied successfully to the control of a biased two-link planar robot manipulator.