• Fisheries and Aquatic Sciences
• /
• 제1권2호
• /
• pp.242-249
• /
• 1998

The engineering aspect of water treatment processes in the recirculating aquaculture system was studied. To recycle the water in the aquaculture system, a wastewater treatment process was required to maintain high water quality for the growth and health of the cultured fish. In this study, three different biofilm processes were used to reduce the concentration of organic matters and ammonia from the recirculating water - two phase fluidized bed, three phase fluidized bed, and trickling filter. The objectives of this research were to evaluate the optimum treatment conditions of the biofilm processes for the recirculating aquaculture system, and thereby reduce the volume of biofilm processes, which are commonly used for the recycle water treatment processes for aquaculture. The result of this study showed that the removal efficiency of organic matters by trickling filter was found to be lower than that of the fluidized bed. In the trickling filter system, anthracite showed better organic removal efficiency than crushed stone as a media. In the two phase fluidized bed, the maximum removal efficiency of either organics or ammonia was obtained when both the packing rate of media was maintained to $40\%$ of total reactor depth excepting sediment zone and the bed expansion rate was maintained to $100\%$. When 100 tilapia (Oreochromis niloticus) of each average 200g was reared, the pollutant production rate was 0.07g $NH_4\;^+-N/kg$ fish/day and 0.06g P04-3-P/kg fish/day, and sludge production rate was 0.39 g SS/kg fish/day. In the two phase and three phase fluidized bed, the volume of water treatment tank could be calculated from an empirical equation by using the relationship between the influent COD to $NH_4\;^+-N$ ratio (C/N, -), media concentration (Cm, g/L), influent ammonia nitrogen concentration (Ni, mg/L), effluent ammonia nitrogen concentration (Ne, mg/L), bed expansion rate $(E,\;\%)$, and influent flowrate $(Q,\;m^3/hr)$. The empirical equation from this study is $$V_2\;=\;10^{3.1279}\;C/N^{3.5461}\;C_m\;^{-3.7473}\;N_i\;^{4.6477}\;E^{0.0326}\;N_e\;^{-0..8849}\;Q\;(Two\;Phase\;FB) V_3\;=\;10^{11.7507}\;C/N^{-1.2330}\;C_m\;^{-6.5715}\;N_i\;^{1.5091}\;N_e\;^{-1.8489}\;Q (Three\;Phase\;FB)$$

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제13권4호
• /
• pp.303-317
• /
• 2013

Two novel clocking strategies for a high-speed multi-channel serializer-deserializer (SERDES) are proposed in this paper. Both of the clocking strategies are based on groups, which facilitate flexibility and expansibility of the SERDES. One clocking strategy is applicable to moderate parallel I/O cases, such as high density, short distance, consistent media, high temperature variation, which is used for the serializer array. Each group within the strategy consists of a full-rate phase-locked loop (PLL), a full-rate delay-locked loop (DLL), and two fixed phase alignment (FPA) techniques. The other is applicable to more awful I/O cases such as higher speed, longer distance, inconsistent media, serious crosstalk, which is used for the deserializer array. Each group within the strategy is composed of a PLL and two DLLs. Moreover, a half-rate version is chosen to realize the desired function of 1:2 deserializer. Based on the proposed clocking strategies, two representative ICs for each group of SERDES are designed and fabricated in a standard $0.18{\mu}m$ CMOS technology. Measurement results indicate that the two SERDES ICs can work properly accompanied with their corresponding clocking strategies.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(1)
• /
• pp.505-508
• /
• 2000

The success of target reconstruction in SAR(Synthetic Aperture Radar) imaging system is greatly dependent on the coherent detection. Primary causes of incoherent detection are uncompensated target or sensor motion, random turbulence in propagation media, wrong path in radar platform, and etc. And these appear as multiplicative phase error to the echoed signal, which consequently, causes fatal degradations such as fading or dislocation of target image. In this paper, we present iterative phase error estimation scheme which uses echoed data in all temporal frequencies. We started with analyzing wave equation for one point target and extend to overall echoed data from the target scene - The two wave equations governing the SAR signal at two temporal frequencies of the radar signal are combined to derive a method to reconstruct the complex phase error function. Eventually, this operation attains phase error correction algorithm from the total received SAR signal. We verify the success of the proposed algorithm by applying it to the simulated spotlight-mode SAR data.

• 한국응용곤충학회지
• /
• 제49권4호
• /
• pp.409-416
• /
• 2010

곤충병원세균인 Photorhabdus temperata ssp. temperata(Ptt)는 곤충의 면역반응을 억제시켜 피기생 곤충 체내에서 공생하는 기주 선충의 발육을 도모하게 된다. 또한 Ptt의 변역억제 활성은 Bacillus thuringiensis(Bt)의 병원성을 증가시킨다. 본 연구는 이러한 유용 곤충병원세균의 대량 생산을 위한 저렴한 배지를 선발하기 위해 수행되었으며, 두 연구용 배지(LB, TSB)와 저렴한 산업용 두 배지(MY, M2)를 상호 비교하였다 모든 배양액에 동일한 밀도의 Ptt를 접종하고 배양하였을 때 48 시간 이후 정지상이 나타났다. 그러나 연구용 배양액인 LB와 TSB에서 두 가지 산업용 배양액보다 정지상에서 높은 세균 밀도를 보였다. 네 가지 배지에서 증식된 Ptt 배양액은 모두 배추좀나방(Plutella xylostella) 3령충에 대한 Bt 병원성을 현격하게 제고시켰고, 이들 배지 종류에 따라 치아가 없었다. 네 가지 배양액에서 세균의 증식에 의해 생산되는 대시물질의 양과 배지별 생산되는 대사물질의 동일성을 확인하기 위해 헥산과 에틸아세테이트의 유기용매로 추출했다. 시간별 배양액의 유기용매 추출물질은 세균의 증식과 비슷하게 대사물질의 생산량에서도 증가하는 것을 알 수 있었다. 역상 HPLC를 이용하여 네 가지 세균 배양액 각각에서 대사물질을 분리하였고, 정량적으로 네 가지 대사물질이 서로 다른 배지에서 통계적으로 차이 없이 검출되었다. 본 연구는 비교적 저렴한 두 가지 산업용 배지가 유용 대사물질의 생성에 변화 없이 Ptt 세균을 저렴하게 배양할 수 있다고 제시하고 있다.

• 자원환경지질
• /
• 제44권2호
• /
• pp.161-170
• /
• 2011

석유공학분야에서 보고된 분율 흐름 접근 방식을 이용하여 물리적 또는 화학적으로 불균질한 매질에서 완전한 삼상유체를 고려할 수 있는 다상 흐름 수치 모의 프로그램인 CHMPS가 개발되었다. 이 프로그램은 석희준과 G.T. Yeh (2008)에 의해 개발된 MPS을 확장하였는데, 친수성이 NAPL 거동에 미치는 영향을 모의하기 위하여 개발되었다. 대부분 존재하는 모델들은 물리적으로 불균질한 매질을 고려하고 이상흐름과 특정한 경계조건에 국한되어 있다. 게다가 대부분의 모델들은 주로 water-wet 매질에만 국한되어 있다. 그러나 실제 존재하는 시스템에서는 water-wet과 oil-wet 매질 사이의 친수성의 변화는 종종 일어난다 더군다나 기름에 의한 다공성 매질의 젖음은 균등하기 보다는 불균질 또는 부분적일 수 있다. 왜냐하면 친수성에 영향을 미치는 요소들과 지하 매질이 불균질하기 때문이다. 따라서, 이번 연구에서는 물리적으로 불균질한 매질 뿐만 아니라 친수성 변에서 화학적으로 불균질한 매질을 CHEMPS을 활용하여 수치모의 하였다. 그 외에도 개개의 상에 대해서 유량 경계조건 및 고정경계조건의 두 가지 형식의 결합으로 표현되는 일반경계조건이 고려되었다.

• 한국태양에너지학회 논문집
• /
• 제30권1호
• /
• pp.34-41
• /
• 2010

Gas hydrates are solid solutions when water molecules are linked through hydrogen bonding and create host lattice cavities that can enclose many kinds of guest(gas) molecules. There are plenty of methane(gas) hydrate in the earth and distributed widely at offshore and permafrost. Several schemes, to produce methane hydrates, have been studied. In this study, depressurization method has been utilized for the numerical model due to it's simplicity and effectiveness. IMPES method has been used for numerical analysis to get the saturation and velocity profile of each phase and pressure profile, velocity of dissociation front progress and the quantity of produced gas. The values calculated for the sample length of 10m, show that methane hydrates has been dissolved completely in approximately 223 minutes and the velocity of dissociation front progress is 3.95㎝ per minute. The volume ratio of the produced gas in the porous media is found to be about 50%. Analysing the saturation profile and the velocity profile from the numerical results, the permeability of each phase in porous media is considered to be the most important factor in the two phase flow propagation. Consequently, permeability strongly influences the productivity of gas in porous media for methane hydrates.

• 정보저장시스템학회논문집
• /
• 제8권2호
• /
• pp.44-49
• /
• 2012

We measured the surface flatness of both sides for refractive media using the transmitted digital holography method. To enhance the accuracy of the result, phase-shifting system was used. With two different phase modulation of reference beam, the phase profile of object can be easily obtained. Thus, we proposed the surface measurement method which can measure large area fast, compared with conventional methods. To guarantee the reliability of obtained result, we compared with Zygo measurement system. With the proposed method, the surface flatness of $3.45{\mu}m$ resolution could be obtained.

• Structural Engineering and Mechanics
• /
• 제11권5호
• /
• pp.547-564
• /
• 2001

The numerical formulation of a two-phase interface element appropriate for porous lining system is presented. The formulation is isoparametric and can be applied both for 2-D and 3-D analysis. Biot's theory is utilized as the basis for the development of the element constitutive theory. In order to be capable of simulating the reinforcing characteristics of some geotextiles utilized as lining system, a reinforcement component has also been implemented into the formulation. By employing this specially developed interface finite element, the influence of soil consolidation on the stress distribution along the lining system of a reservoir and a landfill has been investigated.

• 대한기계학회논문집B
• /
• 제22권4호
• /
• pp.542-550
• /
• 1998

A direct contact heat exchanger using particle-suspended gas as a heat transfer medium is analyzed with an extended emphasis on the radiation, i. e., considering the radiation by both gas and particles. While the Runge-Kutta method is used for a numerical analysis of the momentum and energy equations, the finite volume method is utilized to solve the radiative transfer equation. Present study shows a notable effect by the gas radiation in addition to the particle radiation, especially when changing the chamber length as well as the gas and particle mass flow rate. When the gas and particle mass flow rate is raised, the gas temperature in the particle heater still increases as the gas absorption coefficient increases, which is different from the results for the small scale heat exchanger.

• Coupled systems mechanics
• /
• 제12권2호
• /
• pp.103-125
• /
• 2023

The present research is focused on the study of plane harmonic waves in a two-dimensional orthotropic magneto-thermoelastic media with fractional order theory of generalized thermoelasticity in the light of two-temperature and rotation due to time harmonic sources. Here, we studied three types of waves namely quasi-longitudinal (QL), quasi-transverse (QTS) and quasi thermal (QT) waves. The variations in the wave properties such as phase velocity, attenuation coefficient and specific loss have been noticed with respect to frequency for the reflected waves. Further the value of amplitude ratios, energy ratios and penetration depth are computed numerically with respect to angle of incidence. The numerical simulated results are presented graphically to show the effect of fractional parameter based on its conductivity (0<α<1 for weak, α=1 for normal, 1<α≤2 for strong conductivity) on all the components.