• 한국정보통신학회논문지
• /
• 제10권9호
• /
• pp.1617-1624
• /
• 2006

본 논문은 분산전원시스템(DGS)을 위 한 시스템 모델링, 수정된 SVPWM 적용 그리고 수동소자인 L과 C로 구성된 Z-원 인버터의 제어기에 대하여 기술하였다. 기존의 DC/DC 승압 컨버터나 변압기를 사용하지 않고 낮은 DC 입력을 상용 AC로 만들기 위해서 SVPWM의 영벡터 구간을 이용해 DC-링크단 전압을 승압하는데 이용하였다. 한 스위칭주기에 3개조의 스위칭소자 중에 2개조만 동시 도통되도록 하여 유효벡터의 손실 없이 승압이 가능하도록 하였다. 빠르고 오버슈트가 없는 전류응답과 낮은 정상상태 전압오차를 얻기 위해서 이산시간 슬라이딩모드 전류제어기와 강인한 서보기구 전압제어기를 설계하였다. 시뮬레이션을 통하여 제안된 알고리즘의 유용성을 확인하였다.

• 한국광학회지
• /
• 제15권3호
• /
• pp.229-233
• /
• 2004

본 논문에서는 코히런트 시간 광 CDMA 시스템에서 발생되는 다중접근 간섭(MAI)을 제거하기 위한 전 광학적인 차동 검출 방법을 제안한다. 비선형 광학루프 거울(NOLM)은 두 제어 포트로 인가되는 광파워의 차를 출력으로 내 보내는 역할, 즉 전 광학적 차동 검출기로서 동작한다. 따라서, 같은 파형과 광 파워로 입력되는 MAI는 NOLM에서 차동 검출되어 제거된다. 실험을 위하여 두 개의 채널이 인코딩/디코딩 되었다. 디코딩된 신호는 NOLM의 두 제어 포트에 보내어지고, 출력단에서 MAI가 크게 제거된 반면, 높은 자기상관 피크를 가진 신호가 관측되었다. NOLM 통과 후, 신호-대-간섭 비는 7 ㏈만큼 개선되었다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
• /
• pp.252-257
• /
• 2000

This paper describes a look-ahead algorithm of PCNC(personal computer numerical control). The algorithm is based on acceleration/deceleration before interpolation never including a command error and determines a velocity value in end point of each block(or start point of each block). The algorithm is represented as following; 1) calculating two maximum arrival velocity(v1, v2) by a acceleration value, a command velocity and distance in a previous block and a next block, 2) getting a tangent velocity(v3) of the adjacent blocks, 3) choosing a minimum value among these three velocities, and 4) setting the value to a velocity of a start point of the next block(or a end point of the previous block). The proposed look-ahead algorithm was implemented and tested by using a commercial RTOS(real time operation system) on the MS-Windows NT 4.0 in a PC platform. For interfacing to a machine, a counter board, a DAC board and a DIO board were used. The result of the algorithm increased a machining precision and a machining speed in many short blocks.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.220-227
• /
• 2000

The purpose of this study is to develop the non-gravity fluidized dryer. In this non-gravity fluidized dryer the fluidized zone is produced by two paddles in mixer, which maximizes the surface area of materials and then heated air through the guiding panels dehumidify them. This can conduct the drying process quickly and control moisture contents to lower limits. The ventilation system is closed loop system, which can be changeable to open system, and can be used as a multi-purposed dryer in which mixing, drying, granulating and cooling process is conducted. In order to develop non-gravity fluidized dryer, in the first the fundamental experiments performed to mixing accuracy and then the other parts of dryer and control system were examined to check whether they were designed properly and operated harmoniously with mixer. Also the preparatory experiments were fulfilled to examine the efficiency and reliability of dryer. Lastly, on the basis of preparatory experiments in case the initial moisture contents, desired moisture contents, heated air velocity and heating temperature were vary, performance test for the non-gravity fluidized dryer carried out.

• 제어로봇시스템학회논문지
• /
• 제12권10호
• /
• pp.989-995
• /
• 2006

This paper shows that the OFDM(Orthogonal Frequency Division Multiplex) system is robust to multipath than CDMA (Code Division Multiple Access) system and it has a strong possibility to be utilized as a supplementing wireless location system for the forthcoming portable internet network. The OFDM system based on IEEE 802.16e is a wireless TDD (Time Division Duplex) OFDMA (Orthogonal Frequency Division Multiple Access) system providing portable internet services in 2.3 GHz frequency band and is scheduled in service in Korea starting in 2006. In this paper, multipath error is calculated using a two-ray model and compared with that of a CDMA system which is following IS-95. The OFDM system shows a maximum multipath error of 3 m while a CDMA system shows a maximum multipath error of 61 m. For this simulation, an early-late technique is used. This technique is usually used to match synchronization of signal in DLL(Delay Lock Loop).

• 전력전자학회논문지
• /
• 제23권1호
• /
• pp.66-71
• /
• 2018

We propose an online parameter estimation method for surface-mounted permanent-magnet synchronous motor (SPMSM) using an affine projection algorithm (APA). The proposed method estimates parameters with two APAs based on the discrete-time model equation of SPMSM during motor operation. The first APA is designed to estimate inductance, and the second APA is designed to estimate resistance and flux linkage. However, in case when the d-axis current is controlled to 0A, the second APA cannot estimate resistance and flux linkage simultaneously because the matrix rank in APA becomes deficient. To overcome this problem, we temporarily inject a negative reference current input to the d-axis control loop, and the matrix in the APA then becomes full rank, which enables the simultaneous estimation of resistance and flux linkage. The proposed method is verified by PSIM simulation and an actual experiment, and the results reveal that SPMSM parameters can be estimated online during motor operation.

• BMB Reports
• /
• 제29권1호
• /
• pp.92-97
• /
• 1996

The age-46.5 gene of Escherichia coli is induced by nitrate ion and regulated by Fnr, NarL, and NarP during anaerobic growth. aeg-46.5::lacZ fusion gene shows its maximum expression in narL host after two hours of aerobic to anaerobic switch in M9-Glc-nitrate medium. Fnr and NarP act as positive regulators, and NarL acts as a negative regulator. The control region of the aeg-46.5 was identified and the binding sites of regulator proteins have been predicted (Reznikoff and Choe (1993)). It has two symmetry regions. One is located at -52~-37 bp from the anaerobic mRNA 5'-end, which is the binding site of NarL and NarP. The other is located at +37~+56 bp from the 5'-end of mRNA. In this study, the downstream symmetry region from the mRNA 5'-end was investigated by site-directed mutagenesis. The destruction of the symmetry region increases the expression level of aeg-46.5. We propose that the symmetry region interferes with the expression of aeg-46.5 possibly by forming a stem-and-loop structure.

• Journal of Power Electronics
• /
• 제16권5호
• /
• pp.1821-1832
• /
• 2016

This study presents a strategy using the synchronized output regulation method (SOR) for controlling inverters operating in stand-alone and grid-connected modes. From the view point of networked dynamic systems, SOR involves nodes with outputs that are synchronized but also display a desirable wave shape. Under the SOR strategy, the inverter and grid are treated as two nodes that comprise a simple network. These two nodes work independently under the stand-alone mode. An intermediate mode, here is named the synchronization mode, is emphasized because the transition from the stand-alone mode to the grid-connected mode can be dealt as a standard SOR problem. In the grid-connected mode, the inverter operates in an independent way, in which the voltage reference changes for generalized synchronization where its output current satisfies the required power injection. Such a relatively independent design leads to a seamless transfer between operation modes. The closed-loop system is analyzed in the state space on the basis of the output regulation theory, which improves the robustness of the design. Simulations and experiments are performed to verify the proposed control strategy.

• 한국시스템다이내믹스연구
• /
• 제1권1호
• /
• pp.159-183
• /
• 2000

How to protect the environment without sacrificing the human environment and economy at the level of region is on of the most difficult issues of recent times. The dynamic Interactions between economic activities and environmental pollution control activities determine whether social welfare is increased of decreased by such activities and provides a basis for saying whether they help or hurt the economy. Bureaucratic Approach of Local government has failed, and an Impetus has arisen to develop new tools of analysis, useful for finding policy leverages focused on sustainability. This paper focus on understanding dynamic relationships between regional economic system and environmental system, and presenting possible framework for finding policy leverages in dynamic interaction behaviors. The case, selected in this study, is Nacdong river regions case, which is related many meaningful issues about sustainable development： two big metropolitan government and dwellers have different opinion with regard to construction of large scale Industrial pack, drinking water supply, and environment model consisting of three sectors： regional economy sector, river pollution and drinking water sector, environmental protection and investment policy sector Finally, this paper deal with how to link policy leverage to causal loop structure for the sustainable development of two regions.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집B
• /
• pp.295-300
• /
• 2001

In recent years, as changing the habit of eating, the pathology in the colon grows up annually. For that reason, the colonoscopy is generalized. But it requires much time to acquire a dexterous skill to perform an operation. And the procedure is painful to the patient. Therefore, biomedical and robotic researchers are developing a locomotive colonoscope that can travel safely in colon. In this paper, we propose a novel design and concept of semi-autonomous colonoscope and two actuators for the micro robot. The micro robot comprises camera and LED for diagnosis, steering system to pass through the loop, pneumatic actuator and bow-shaped flexible supporters to control a contact force and to keep the space between colon wall and the actuator. For actuating mechanism, we suggest two models. One is based on the reaction force, and the other is impact force. In order to validate the concept and the performance of the actuators, we carried out the preliminary experiments in rigid pipes.