• 제목/요약/키워드: two-level resolution

검색결과 261건 처리시간 0.025초

아날로그 뇌파기를 응용한 간단한 디지털 뇌파 시스템 (Simple Digital EEG System Utilizing Analog EEG Machine)

  • 정기영;김재문;정만재
    • Annals of Clinical Neurophysiology
    • /
    • 제2권1호
    • /
    • pp.8-12
    • /
    • 2000
  • Purpose : The rapid development and wide popularity of Digital EEG(DEEG) is due to its convenience, accuracy and applicability for quantitative analysis. These advantages of DEEG make one hesitate to use analog EEG(AEEG). To assess the advantage of DEEG system utilizing AEEG(DAEEG) over conventional AEEG and the clinical applicability, a DAEEG system was developed and applied to animal model Methods : Sprague-Dawley rat as status epilepticus model were used for collecting the EEG data. After four epidural electrodes were inserted and connected to 8-channel analog EEG(Nihon-Kohden, Japan), continous. EEG monitoring via computer screen was done from two rats simultaneously. EEG signals through analog amplifier and filters were digitized at digital signal processor and stored in Windows-based pentium personal computer. Digital data were sampled at a rate of 200 Hz and 12 bit of resolution. Acquisition software was able to carry out 'real-time view, sensitivity control and event marking' during continuous EEG monitoring. Digital data were stored on hard disk and hacked-up on CD-ROM for off-line review. Review system consisted of off-line review, saving and printing out interesting segment and annotation function. Results: This DAEEG system could utilize most major functions of DEEG sufficiently while making a use of an AEEG. It was easy to monitor continuously compared to Conventional AEEG and to control sensitivity during ictal period. Marking the event such as a clinical seizure or drug injection was less favorable than AEEG due to slowed processing speed of digital processor and central processing unit. Reviewing EEG data was convenient, but paging speed was slow. Storage and management of data was handy and economical. Conclusion : Relatively simple digital EEG system utilizing AEEG can be set-up at n laboratory level. It may be possible to make an application for clinical purposes.

  • PDF

Evolution of spatial light modulator for high-definition digital holography

  • Choi, Ji Hun;Pi, Jae-Eun;Hwang, Chi-Young;Yang, Jong-Heon;Kim, Yong-Hae;Kim, Gi Heon;Kim, Hee-Ok;Choi, Kyunghee;Kim, Jinwoong;Hwang, Chi-Sun
    • ETRI Journal
    • /
    • 제41권1호
    • /
    • pp.23-31
    • /
    • 2019
  • Since the late 20th century, there has been rapid development in the display industry. Only 30 years ago, we used big cathode ray tube displays with poor resolution, but now most people use televisions or smartphones with very high-quality displays. People now want images that are more realistic, beyond the two-dimensional images that exist on the flat screen, and digital holography-one of the next-generation displaysis expected to meet that need. The most important parameter that determines the performance of a digital hologram is the pixel pitch. The smaller the pixel pitch, the higher the level of hologram implementation possible. In this study, we fabricated the world-smallest $3-{\mu}m$-pixel-pitch holographic backplane based on the spatial light modulator technology. This panel could display images with a viewing angle of more than $10^{\circ}$. Furthermore, a comparative study was conducted on the fabrication processes and the corresponding holographic results from the large to the small pixel-pitch panels.

엑손 포획 - 원리와 어류의 계통유전체학 및 집단유전체학으로의 응용 (Exon Capture - Principle and Applications to Phylogenomics and Population Genomics of Fishes)

  • Li, Chenhong
    • 한국어류학회지
    • /
    • 제33권4호
    • /
    • pp.205-216
    • /
    • 2021
  • 한 유전좌위 또는 소수의 유전좌위에 기반한 계통발생학적 재구성은 분자 계통수/종 계통수의 불일치로 인해 오해를 불러일으킬 수 있다. 종의 구분과 종내 연구에서도 적은 유전좌위를 사용할 때 통계력 부족으로 해상도가 낮은 경우가 많이 발생한다. 엑손 포획법은 게놈 규모의 데이터를 수집하는 가장 효율적인 방법 중 하나로, 종내 및 상위 수준에서 생물의 패턴과 역사를 구명하는 연구에 크게 이바지할 수 있다. 이 논문에서는 단일 유전자 방법에서 게놈 접근으로의 전환의 진보와 게놈 기술에 비해 엑손 포획법의 적용 이점을 설명하였다. 또한 엑손 포획법의 원리를 설명하고 이 방법의 적용을 위한 상세한 제언을 기술하였다. 최종적으로, 두 가지 적용을 활용한 엑손 포획법을 설명하고 이 기술에 대한 미래 전망을 논의하였다.

대학생 창업프로그램 지원이 창업동기와 창업의지에 미치는 영향 (The Impact of Start-up Support Programs on College Students' Foundation Motivation and Entrepreneurial Intentions)

  • 방형욱
    • 문화기술의 융합
    • /
    • 제7권4호
    • /
    • pp.599-605
    • /
    • 2021
  • 대학생들을 대상으로 그들이 대학에서 제공받는 창업지원프로그램에 대해서 전공만족과 창업의지에 어떠한 영향을 미치며 실증적으로 검증해 보고자 하였다. 연구대상자는 서울/경기, 충청, 경북, 전라도의 2년 및 4년제 대학교 5개 대학에 재학중인 248명이었다. 자료분석은 SPSSWIN 26.0 통계프로그램을 활용하였다. 분석방법으로 기술분석, 탐색적 요인분석, 신뢰도 분석, 다중회귀분석, 조절회귀분석을 실시하였다. 연구결과 대학생 창업프로그램 지원중 창업교육지원/창업활동지원이 기회동기와 성취동기에 통계적으로 긍정적인 영향을 미치는 것으로 나타났다. 그리고 기회동기, 성취동기, 독립동기 모두 창업의지에 긍정적인 영향을 미치는 것으로 나타났다. 또한 대학생 창업프로그램 지원중 창업교육지원/창업활동지원이 창업의지에 통계적으로 긍정적인 영향을 미치는 것으로 나타났다. 본 연구결과에 의하면 대학생들의 전공만족 및 창업의지를 향상시키기 위해서는 창업교육지원과 창업활동지원 프로그램 중심의 프로그램 개발과 활용이 요구된다.

Observation of reinforcing fibers in concrete upon bending failure by X-ray computed tomographic imaging

  • Seok Yong Lim;Kwang Soo Youm;Kwang Yeom Kim;Yong-Hoon Byun;Young K. Ju;Tae Sup Yun
    • Computers and Concrete
    • /
    • 제31권5호
    • /
    • pp.433-442
    • /
    • 2023
  • This study presents the visually observed behavior of fibers embedded in concrete samples that were subjected to a flexural bending test. Three types of fibers such as macro polypropylene, macro polyethylene, and the hybrid of steel and polyvinyl alcohol were mixed with cement by a designated mix ratio to prepare a total of nine specimens of each. The bending test was conducted by following ASTM C1609 with a net deflection of 2, 4, and 7 mm. The X-ray computed tomography (XCT) was carried out for 7 mm-deflection specimens. The original XCT images were post-processed to denoise the beam-hardening effect. Then, fiber, crack, and void were semi-manually segmented. The hybrid specimen showed the highest toughness compared to the other two types. Debonding based on 2D XCT sliced images was commonly observed for all three groups. The cement matrix near the crack surface often involved partially localized breakage in conjunction with debonding. The pullout was predominant for steel fibers that were partially slipped toward the crack. Crack bridging and rupture were not found presumably due to the image resolution and the level of energy dissipation for poly-fibers, while the XCT imaging was advantageous in evaluating the distribution and behavior of various fibers upon bending for fiber-reinforced concrete beam elements.

기상드론 바람관측자료의 정확도 확보를 통한 대기하층 시공간 관측공백 해소 연구 (A Study on Filling the Spatio-temporal Observation Gaps in the Lower Atmosphere by Guaranteeing the Accuracy of Wind Observation Data from a Meteorological Drone)

  • 이승협;박미은;전혜림;박미르
    • 대기
    • /
    • 제33권5호
    • /
    • pp.441-456
    • /
    • 2023
  • The mobile observation method, in which a meteorological drone observes while ascending, can observe the vertical profile of wind at 1 m-interval. In addition, since continuous flights are possible at time intervals of less than 30 minutes, high-resolution observation data can be obtained both spatially and temporally. In this study, we verify the accuracy of mobile observation data from meteorological drone (drone) and fill the spatio-temporal observation gaps in the lower atmosphere. To verify the accuracy of mobile observation data observed by drone, it was compared with rawinsonde observation data. The correlation coefficients between two equipment for a wind speed and direction were 0.89 and 0.91, and the root mean square errors were 0.7 m s-1 and 20.93°. Therefore, it was judged that the drone was suitable for observing vertical profile of the wind using mobile observation method. In addition, we attempted to resolve the observation gaps in the lower atmosphere. First, the vertical observation gaps of the wind profiler between the ground and the 150 m altitude could be resolved by wind observation data using the drone. Secondly, the temporal observation gaps between 3-hour interval in the rawinsonde was resolved through a drone observation case conducted in Taean-gun, Chungcheongnam-do on October 13, 2022. In this case, the drone mobile observation data every 30-minute intervals could observe the low-level jet more detail than the rawinsonde observation data. These results show that the mobile observation data of the drone can be used to fill the spatio-temporal observation gaps in the lower atmosphere.

한반도 남해안 고섬진강 절개곡 시스템의 형성과 진화: 1. 여수해협의 후기 제 4기층에 대한 순차층서 (Formation and Evolution of the Paleo-Seomjin River Incised-Valley System, Southern Coast of Korea: 1. Sequence Stratigraphy of Late Quaternary Sediments in Yosu Strait)

  • 전승수;장진호
    • 한국해양학회지:바다
    • /
    • 제6권3호
    • /
    • pp.142-151
    • /
    • 2001
  • 한반도 남해안의 여수해협에서 지역적으로 대비가 가능한 3 개의 단위층(UH, LH, PL)이 탄성파(3.5 kHz) 자료의 분석을 통해 세분되었다. 단위층 UH는 최상부에 위치하는 펄층으로서 북쪽으로 가면서 얇아지면서 본 해역의 북부(광양만 입구)에 이르러 삼각주에 얹히는 특징을 보여 현세의 해수면 상승과 관련된 해침체계역 (transgressive systems tract)으로 해석된다. 그 하부의 단위층 LH는 본 해역의 북부에서 후퇴경향을 보이는 삼각주 퇴적체($LH_1$)로서 해저면에 노출되는 반면, 본 해역의 중${\cdot}$남부(여수해협)에서 하곡, 계곡, 소분지 등을 충진한 해침퇴적체($LH_2$)로서 UH층과 PL층(플라이스토세 퇴적층)사이에 놓이는 특징을 보인다. 그리고 단위층 UH와 $LH_2$의 경계면은 북쪽으로 가면서 점차 얕아지는 경향을 보이고, 그것의 지형도는 현재 발달되어 있는 조류로의 모습과 매우 유사하여 북쪽(육지 방향)으로 가면서 점차 젊어지는 조석침식면(tidal ravinement surface)으로 해석된다. 따라서 마지막 빙하최성기(last glacial maximum) 이후의 범세계적 해수면 상승(eustatic sea-level rise)은 본 해역의 중${\cdot}$남부를 침수시켜 조석침식면에 의해 두 층(UH와 $LH_2$)으로 세분되는 해침체계역을 형성시킨 반면, 본 해역의 북부에서는 조석침식면이 없이 두 개의 후퇴형 삼각주 로브로 구성된 독특한 해침체계역 ($LH_1$)을 형성시킨 것으로 보인다. 이렇듯 동일한 해수면 상승시기에도 불구하고 지역에 따라 퇴적층의 누적양상(stacking pattern)이 달라지는 이유는 지형, 퇴적물 공급, 조류 등의 지역간 차이 때문이며, 특히 본 해역의 북부에서 해수면 상승과 더불어 조석침식면이 발달하지 못한 까닭은 비교적 넓고 반폐쇄적인 분지형 지형과 섬진강으로부터 많은 퇴적물 공급, 그리고 비교적 약한 조류 때문인 것으로 판단된다.

  • PDF

항공 LiDAR 및 RGB 정사 영상을 이용한 딥러닝 기반의 도시녹지 분류 (Classification of Urban Green Space Using Airborne LiDAR and RGB Ortho Imagery Based on Deep Learning)

  • 손보경;이연수;임정호
    • 한국지리정보학회지
    • /
    • 제24권3호
    • /
    • pp.83-98
    • /
    • 2021
  • 도시녹지는 도시 생태계 건강성 증진을 위한 중요한 요소이며, 건강한 도시 생태계 유지 및 관리를 위해서는 도시녹지의 공간적인 현황 파악이 필요하다. 환경부에서는 2010년 이후부터 총 41개의 분류 항목을 갖는 1m 급 해상도의 세분류 토지피복지도를 제공해오고 있으나, 가로수와 같은 도시 내 고해상도 상세 녹지 정보는 기타 초지로 분류되거나 누락되어 오고 있다. 따라서, 본 연구에서는 수원시 지역을 대상으로 1m 이하 급의 고해상도 원격탐사 자료(항공 LiDAR 및 RGB 정사영상)를 이용하여, 기존 세분류 토지피복지도에서는 나타나지 않는 고해상도의 상세 도시 녹지(수목, 관목 및 초지) 정보를 분류하고자 하였다. 분류 기법으로는 딥러닝 기반의 이미지 분할방법인 U-Net 구조의 모델을 활용하였으며, 분류 항목의 수 및 사용하는 자료의 종류에 따라 총 3가지의 모델(LRGB10, LRGB5, 및 RGB5)을 제안하고 성능을 평가하였다. 검증 지역에 대한 세 모델의 평균 전체 정확도는 각 83.40%(LRGB10), 89.44%(LRGB5), 74.76%(RGB5)이며, 항공 LiDAR와 RGB 정사영상을 함께 사용하여 총 5개의 항목(수목, 관목, 초지, 건물, 및 그 외)을 분류하는 LRGB5 모델의 성능이 가장 높게 나타났다. 수원시의 수목, 관목 및 초지 기준의 전체 녹지 현황은 각 45.61%(LRGB10), 43.47%(LRGB5), 및 44.22%(RGB5)로 나타났으며, 세 모델 모두 기존 세분류 토지피복지도와 비교하여 평균 13.40%의 도시 수목 정보를 더 제공할 수 있는 것으로 나타났다. 더불어 이러한 도시녹지 분류 결과는 향후 중분류 토지피복지도와 같은 기존 GIS 정보와의 융합을 통해 가로수 녹지 비율 현황 등 추가적인 상세 녹지 현황 정보를 제공할 수 있어, 다양한 도시녹지 연구 및 정책의 기초 자료로 활용될 수 있을 것으로 기대된다.

제조-공급자간 갈등 원인과 거래조정 방식의 갈등관리 효과 (The Causes of Conflict and the Effect of Control Mechanisms on Conflict Resolution between Manufacturer and Supplier)

  • 이진화
    • 한국유통학회지:유통연구
    • /
    • 제17권4호
    • /
    • pp.55-80
    • /
    • 2012
  • 다른 기업과 거래관계를 형성하고 유지하는 것은 빠르게 변화하는 치열한 환경에서 대부분의 기업에게 불가피한 전략적 선택이다. 유통망 안의 모든 기업들도 결국 독립적 기업 간의 이러한 거래 계약으로 맺어져 있다. 하지만 모든 기업 간의 거래가 하나의 목표를 가지고 공동의 이익 창출을 위해 노력하여, 모두 효과적이고 효율적인 성과만을 낼 수는 없다. 대리인 이론에 따르면, 기업들은 모두 독립적 주체로서 각자의 이해를 추구하고, 위험을 회피하려하며, 제한된 합리성을 가지고 불충분한 정보를 처리하게 된다. 즉, 기업 간 거래관계는 그 속에서 신뢰와 협력을 기대하는 동시에, 갈등과 기회주의적 행위도 예측해야 한다. 이에 본 연구는 기업 간 거래의 갈등 원인을 확인하고, 실제 기업이 주로 활용하는 거래조정 방식의 갈등관리 효과를 밝히고자 한다. 이를 위해 관련된 기존 연구와 대리인 이론을 활용하여, 제조업자와 공급업자 간 갈등이 관계성과에 미치는 영향과 거래 위험요인(환경동태성, 자산특유화 수준)의 갈등 유발 효과, 그리고 국내 기업거래 연구에서 잘 다루어지지 않은 거래 조정방식의 갈등관리 효과를 가정하였다. 더불어 국내 중소기업 데이터 329개를 대상으로 연구모델을 검증하였다. 연구 결과, 구매기업(제조업자)의 환경 동태성과 자산 특유화 수준이 높을수록 더 큰 갈등이 유발되었으며, 이러한 B2B 갈등은 기업 간 관계질과 재무성과에 부정적 영향을 끼쳤다. 또한 사회적 조정방식과 법적 조정방식은 갈등의 관계질에 대한 부정적 영향을 매우 유의한 수준에서 완화시키는 조절효과가 검증되었다. 이러한 결과를 바탕으로 본 연구는 B2B갈등의 원인과 관리기법에 대하여 실증적으로 확인하였다는 의의가 있으며, 특히 국내 거래관리 연구에서 소홀히 다루어졌던 법적 계약 방식의 긍정적이고 유의한 효과를 확인하였다는 의의가 있다.

  • PDF