• 한국산림과학회지
• /
• 제3권1호
• /
• pp.15-17
• /
• 1963

1) An experiment was made at the newly constructed glass house of Chun chan Agriculture callege to find out facts about the late-raising of Cortinellus edodes (Berk) Ido et Imai during the winter season. 2) The host timbers used in this experiment were Quercus Serrata Thumb and Quercus crispulo BI.; 5 years old each, the diameter ranging from 6cm to 17cm, dividing them into 12 diameter groups with 10 timbers in each group. The total number of timbess was 240 in two blocks. 3) As the pre-treatment of host timber, the autumn generation in 1962 was inhibited, and before being put into the glass-house, they were stimulated of generation for 3 days after 3 days, water-soaking. 4) The temperature control was made by using two coal stoves and the humidity control by spraying and two full water tanks. During cloudy weather and night, the green house was covered to preserue constant temperature of $5^{\circ}C{\sim}10^{\circ}C$. 5) The result; Quercus Serrata Thumb. with lesser diameter than 9cm showed no generation either in as big timber as one with diameter 11 cm. On the other hand, too big timbers showed low rate of generation; the reason, at a guess, is the too short period of cultivation and insufficient water soaking and inappropriate temperature. 6) The most standard size of host timber was found out be those with diameter 12cm~15cm in Quercus serrata Thumb, and those with diameter 14cm~17cm in Quercus crispula BI. Quercus crispula seemed to have slightly greater efficiency of generation than Quercus Serrata Thumb., but it could not be concluded as "decisive". Lastly, the host timber used in this experiment were old and the rate of generation was low as a whole.

• 생명과학회지
• /
• 제25권7호
• /
• pp.765-772
• /
• 2015

2세대동물에 있어 bisphenol A (BPA)에 대하여 decursin and decursinol angelate (D/DA)의 투여가 출산률 회복에 미치는 영향에 대하여 연구하였다. 실험그룹은 대조군, BPA 투여군, BPA와 D/DA 병용투여군으로 이루어졌으며, BPA와 D/DA 병용투여군에서 BPA 투여군과 비교 시 어미개체에서 몸무게, 장기무게에서 차이를 보였다. 정자수는 대조군과 비교 시 BPA군에서는 64.70%로 감소하였고 BPA와 D/DA 병용투여군에서는 7.69% 감소를 확인하였다. 고용량의 BPA (50 mg/kg/day)의 복용개체에서는 1세대에 임신 및 출산을 하지 못하였다. 하지만, BPA와 D/DA 병용투여군에서는 BPA 투여군과 비교 시 임신(98.87%) 및 출산률(55.78%)이 회복 됨을 확인하였다. 또한, 2세대의 임신 및 출산률은 대조군(75.02%)과 비교 시 BPA와 D/DA 병용투여군(78.11%)에서는 차이가 없음을 확인하였다. 이 연구결과는 D/DA (50 mg/kg/day)의복용은 임신 및 출산에 있어 긍정적인 영향을 주는 것으로 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 C
• /
• pp.1453-1455
• /
• 1999

This paper presents an economical generation planning for operating power systems with dispersed generation. As dispersed generation introduced into an electric power distribution system, the power system will be complicated and have much variable aspects. So there is need for developing new generation scheduling. In this paper, the proposed method is tested for distribution system with two battery storage resources. Optimal generation planning of 15 thermal units in 24-hours is achieved by improved genetic algorithm. Also, to show its effectiveness, the results are compared with those of not including battery storage resources.

• 한국CDE학회논문집
• /
• 제5권3호
• /
• pp.207-214
• /
• 2000

For last 20 years, a number of researches and developments on finite element mesh generation has been carried out and most of them are comported of node generation part and node generation part. However these algorithms are inefficient in mesh veneration process and difficult to control the shape of elements when comparing with the generation of nodes and elements concurrently. In this study, therefore, an algorithm it proposed to generate nodes and elements concurrently for various two-dimensional objects having multiple holes. Inner node generation is performed by choosing three consecutive boundary nodes and comparing them with other close boundary nodes. As soon as inner nodes are determined, element generation is conducted based on the comparison of the distances among the generated inner nodes, three consecutive boundary nodes and other close boundary nodes. the generated element nodes become new boundary nodes for further repeated process. The processes are repeated through out each region until three consecutive boundary nodes finally form a tirangular element.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.430-433
• /
• 1996

In This paper, we design the developed path generation method which is named that CBPM(Continuous path generation method Based artificial Potential field) that is able to be used in the obstacles environment. This CBPM is designed so that it puts together two obstacle avoidance algorithm-the continuous path generation method and the artificial potential field method. Here, the continuous path generation method generate the safety path using continuous path curvature. But, this method has demerits when used in obstacles environment in which are closely located. Another method which is named the artificial potential field method generates the path with the artificial potential field in the obstacles environment. But, APFM has local minima in certain places and unnecessarily calculates the path in which obstacles are not located. So, the developed path generation method, CBPM, is suggested and performances in many different obstacles environments are shown by using computer simulation.

• 한국실내디자인학회논문집
• /
• 제16권4호
• /
• pp.39-46
• /
• 2007

The aim of this study was to recognize the need of three generation family house that is traditional house type of Korea. First, the pre-research analysis method was used for this study. And then, there are three type's grouping like those are as follows; 1) Recognition of three generation family house. 2) Type of three generation family house. 3) Plans of three generation family house. The analysis results are as follows; If the conditions are better than now, recognition is positive. Type are living together and next doors type can direct access. Some standart plan is been about room's number, house's area, bath's number and so on. Second, try to compare plan - this plan already has been used building - with standard plan. The compare result are as follows; three generation family houses - be used by whom - do not apply to standard plan. Almost houses have a three room that is less than the standard plan. All houses have a number of two bath that is less than the standard plan too. Condition of consideration is suitable to ages in next door type, but in case of living together type that consider user whom is use the inner room. Separation of entrance distinguish between the living together type and the next doors type. In case of living together type Dining with Kitchen room's number is one, but the next doors type have the number of two.

• 한국주거학회논문집
• /
• 제16권2호
• /
• pp.83-90
• /
• 2005

A goal of this research is to propose the remodeling possibility from deteriorated stock apartment housing, to three generation family living in a dwelling unit for low incomes. An apartment housing which was built from 1970s, is accumulated over $55\%$ of the stock housing in Korea, many of them are confront with a rebuilding in a short usage of twenty years below. They are small one, and many of the residence complain narrow and small space compare to economic growth and their needs. This article deals the reform of two to one dwelling units, that it can be use for three generation family living as a new residence, because its spatial character is more controled privacy condition as a four bay spatial organization in the dwelling. The reform simulated in a 10, 13, 14, 15, and 16 pyung, the remodeling size became from 20 to 30 pyung, and its reform can be apply to extend life cycle of a stock confront with redevelopment. The possibility of the reform houses have more intensive privacy in a house compare with same area of new apartment. It tells us that we can recycle the deteriorate apartment house into three generation family living use, and it will be clue to change slum clearance into reform and recycle of deteriorate apartment house.

• 한국군사과학기술학회지
• /
• 제21권3호
• /
• pp.331-341
• /
• 2018

This study proposes an integrated serial spring-damper mechanism as a dual pulse generation system. Compared to the traditional dual pulse generation system, which used multiple springs and a damper to generate a dual pulse critical for impact testing of naval equipments, currently used separated serial spring-damper mechanism is comprised of two components: an air spring, and a damper. The proposed mechanism combines the two components into one integrated system with a unique design that lets simply changing the volume and the pressure of the air tank, and the length of the annular pipe adjust the stiffness and damping constants for testing, eliminating the need to have multiple sets of air springs and dampers. Simulations using MatLab and Simulink were conducted to verify the feasibility of this design. The results show the potential of an integrated serial spring-damper mechanism as a more convenient and flexible mechanism for dual pulse generation system.

• 대한전기학회논문지:전력기술부문A
• /
• 제53권5호
• /
• pp.302-307
• /
• 2004

As deregulation of power industry is becoming a reality, there has been an intense interest in the strategic bidding for suppliers to maximize their profits. The profit gained by a supplier is related not only to its energy-price bid curve but also to its submitted operational parameters such as generation capacity, etc. So suppliers are willing to use those strategic parameters that can be manipulated by themselves and are effective to their profit. This paper deals with the competition model with compound strategies: generation capacity and bidding curve. The parameter space is modeled by dividing into the two strategies, so the problem is made up of the four types of sub-game in a two player game. This paper analyzes the global Nash Equilibrium (NE) over the whole divisions by computing the sub-game NEs in some divisions and by deriving the best response curves which have discontinuities in other divisions. The global NE is shown to correspond to the Cournot NE where the quantity variable is realized by a constraints of a generation capacity.

• Agricultural and Biosystems Engineering
• /
• 제6권2호
• /
• pp.65-69
• /
• 2005

A windheat generation system with a Savonius windturbine was developed and the performance was evaluated through field tests. The system consisted of a heat generation drum, heat exchanger, water storage tank, and two circulation pumps. Frictional heat is created by rotation of a rotor inside the drum containing thermo oil, and was used to heat water. In order to estimate the capacity of this windheat generation system, weather data was collected for one year at the site near the windheat generation system. Wind Power from the savonius wind turbine mill was transmitted to the heat generation system with an one-to-three gear system. Starting force to rotate the savonius wind turbine and the whole system including the windheat generation system were 1.0 and 2.5 kg, respectively. Under the outdoor wind condition, maximum speed of the rotor in the drum was 75rpm at wind speed 6.5 m/sec, which was not fast enough to produce heat for greenhouse heating. Annual cumulative hours for wind speeds greater than 5 m/sec at height of 10, 20, 30 m were 190, 300 and 1020 hrs, respectively. A $5^{\circ}C$ increase in water temperature was achieved by the windheat generation system under the tested wind environment.