• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.30 no.4
• /
• pp.273-282
• /
• 1994

This paper describes about the behavior of the lseraeli carp (Cyprinus cartio. body length 43cm) and the Red seabream (Chrysophrys major. body length 35cm) aquacultured by telemetry techniques. The telemetry system consists of a pinger of 50kHz, three omni-directional hydrophones and ultrasonic receivers, a single board computer for the signal processing, two RF transceivers for the data communication, and a personnel computer. Those fish tagged the pingers were tracked by the LBL method, and its location was calculated by the hyperbolic method. The average speed of the lsraeli carp was about 1.0 times of the body length in a farming water tank (24$\times$24$\times$1m), and the Red seabream 1.3 times of the body length in a farming raft (10$\times$10$\times$5m). A variation of the speed of the lsraeli carp was higher than the other one.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.30 no.4
• /
• pp.263-272
• /
• 1994

The hardware and the software of the prototype telemtry system to monitor the behavior of the fish are designed. This system consistes of five parts I. e. three omni-directional hydrophones, three ultrasonic receivers, a single board computer for the signal processing, two RF transceivers for the data communication, and a personnel computer. The sensitivty of the hydrophones is -170dB(re 1V/$\mu$Pa), the gain and the 3dB receiving bandwidth of the ultrasonic receivers are 115dB and 1500Hz respectively, and the sampling period is 33.3$\mu$sec in the signal processing part. The positioning error of the system using hyperbolic method is estimated to be less than 0.2m in case that the pinger locates inside of the baselines. The perfomance of the system considering a practical use was examined by numerical simulation and a water tank test of a pinger tracking experiment. In results, the system developed in prototype was confirmed that it could be useful for monitoring the behavior of fish in the limited water area.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.7
• /
• pp.966-973
• /
• 2012

In microgrid demonstration site, distributed generations can make bidirectional power flows on the system. If an accident occurs, the fault current from the inverter based distributed generation is small. However, the conventional protection scheme in distribution network is designed to operate at high fault current. This means that the traditional protection of distribution network is no longer applicable and new protection methods must be developed. In this paper, for two cases, algorithms for protection coordination of demonstration site is proposed and verified through PSCAD/EMTDC simulation. In first case, protection devices are assumed to have the abilities of directional relaying and communication. In second case, protection devices do not have those abilities. Proposed protection coordination algorithms detect the fault locations and protect the microgrid fairly well.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.1
• /
• pp.1-8
• /
• 2013

High-density discrete wavelet transformation is one way to overcome the disadvantages of the standard wavelet transform of shift invariant because it increases the number of subband signals. In this paper, high-density discrete wavelet transform consisting of three channels is applied in a two-dimensional image processing. Experimental results show that the proposed method is well satisfied with the shift invariant and is excellent directional selectivity because it could generate many subband images.

• International Journal of Internet, Broadcasting and Communication
• /
• v.12 no.2
• /
• pp.83-89
• /
• 2020

A microstrip feedline based open ended folded-slot antenna is proposed for ultra-wideband (UWB) applications. The prototype of the proposed antenna is fabricated on the FR4 dielectric substrate. The proposed antenna has a wide n-shaped slot that is useful for designing circuit components on the same printed circuit board (PCB) as that of the radio frequency (RF) modules. The proposed antenna use two kinds of slots as radiators, and each slots have different characteristics because of the different type of ends of the slot. The wideband characteristic can be obtained by resonances of each slot which are occurred at different frequencies. The measured impedance bandwidth (S₁₁≤ -10 dB) is 2.9-11.56 GHz, and the antenna peak gain is 2-4 dBi over the UWB range. The antenna has a stable omni-directional radiation pattern and only a small group-delay variation across the UWB passband. In addition, we present a modified design with band-notched characteristics of a 5 GHz wireless local area network (WLAN) frequency band.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.1
• /
• pp.77-83
• /
• 2014

Over-sampled discrete wavelet transformation is one way to overcome the disadvantages of the standard wavelet transform of shift invariance even though it increases the number of subband signals. Non-separable based discrete wavelet transform is efficient that it satisfies shift invariance and directional selectivity. In this paper, since efficient over-sampled wavelet transform is possible in a two-dimensional image processing, we show that the proposed method is well applied with performance improvement of digital image and noise removal.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.3
• /
• pp.890-910
• /
• 2014

This paper investigates the spectrum hole utilization of cooperative schemes for the two-way relaying model in order to improve the utilization efficiency of limited spectrum holes in cognitive radio networks with imperfect spectrum sensing. We propose two specific bidirectional secondary data transmission (BSDT) schemes with two-step and three-step two-way relaying models, i.e., two-BSDT and three-BSDT schemes, where the spectrum sensing and the secondary data transmission are jointly designed. In the proposed cooperative schemes, the best two-way relay channel between two secondary users is selected from a group of secondary users serving as cognitive relays and assists the bi-directional communication between the two secondary users without a direct link. The closed-form asymptotic expressions for outage probabilities of the two schemes are derived with a primary user protection constraint over Rayleigh fading channels. Based on the derived outage probabilities, the spectrum hole utilization is calculated to evaluate the percentage of spectrum holes used by the two secondary users for their successful information exchange without channel outage. Numerical results show that the spectrum hole utilization depends on the spectrum sensing overhead and the channel gain from a primary user to secondary users. Additionally, we compare the spectrum hole utilization of the two schemes as the varying of secondary signal to noise ratio, the number of cognitive relays, and symmetric and asymmetric channels.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.1
• /
• pp.15-20
• /
• 2020

In this paper, delay diffusion for exhibition hall and conference room was measured and analyzed in the indoor environment of the building. Scenarios for the indoor environment of the two buildings were written. also, the system configuration and measurement methods were conducted under the same conditions. The measurement conditions were set to 3 GHz and 6 GHz of center frequencies and analysis band selected 2 GHz. The measurement system consisted of vector network analyzer, power amplifier, omni-directional transmit and receive antenna, and transmission line. According to the indoor environment scenario of the two buildings, the location of the receiving antenna was divided into three zones based on the location of the transmitting antenna and this was measured at 1 m intervals according to 18 locations. The power delay profiles, RMS delay spread, and K-factor results of two buildings were compared and analyzed.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.6
• /
• pp.17-23
• /
• 2021

In the present study, a more compact dual-band slot antenna is newly proposed for Wi-Fi application. The proposed antenna is composed of rectangular two stepped slot with open end which can generate standing wave resonance at dual frequency bands and L-type microstrip feed line. The measured impedance bandwidths are 50 MHz(2.412 ~ 2.470 GHz) at low frequency band and 452 MHz(5.451 ~ 5.903 GHz) at high frequency band respectiviely. Furthermore its size of 14 × 21 mm² is reduced by 30% compared to the size of 20 × 21 mm² of a conventional similar compact slot antenna. It has the omni-directional radiation pattern characteristics of a typical dipole antenna on the H-Plane, so it is suitable for commercial wireless network applications such as Wi-Fi.

• Journal of Industrial Technology
• /
• v.22 no.B
• /
• pp.155-161
• /
• 2002

As the wireless communications are gradually developed, the higher frequency is demanded and the smaller the size of antenna shall be reduced by the wavelength of the operating frequency. However, the smaller the size of antenna becomes, the less the gain is obtained according to the frequency, so that a new attempt such as an array antenna has been examined to improve the characteristics. Also, for the convenience of communication, the omni-directional property is required. In this paper, two antennas system which is aligned in cross direction in tested and analyzed. The main scope is focused to get an appropriated distance between the two small antennas to get better properties. There are various ways of array arrangement, but in this study, it should be placed on the same PCB for easy implementation and the direction of each antenna are aligned to be a cross($90^{\circ}$) position. The study is carried out by comparing the radiation patterns mainly, and the theoretical expectation and the computer simulation are also executed. The final model is the folded IF-antennas system printed on PCB and the ideal dipole-antenna arrangement in also test to verify the possibility of our implementation. And it is finally proved by measuring experiments.