• Journal of Electrical Engineering and Technology
• /
• 제10권3호
• /
• pp.1025-1034
• /
• 2015

This paper presented an improved analytical method for calculating the open-circuit magnetic field in the surface-mounted permanent magnet machines accounting for slots and eccentric magnet pole. Magnetic field produced by radial and parallel permanent magnet is equivalent to that produced by surface current according to equivalent surface-current method of permanent magnet. The model is divided into two types of subdomains. The field solution of each subdomain is obtained by applying the interface and boundary conditions. The magnet field produced by equivalent surface current is superposed according to superposition principle of vector potential. The investigation shows harmonic contents of radial flux density can be reduced a lot by changing eccentric distance of eccentric magnet poles compared with conventional surface-mounted permanent-magnet machines with concentric magnet poles. The FE(finite element) results confirm the validity of the analytical results with the proposed model.

• 대한기계학회논문집B
• /
• 제26권7호
• /
• pp.997-1004
• /
• 2002

The current study describes experimental and computational works on the passive control of the steady and unsteady condensation shock waves, which are generated in a transonic nozzle. The bleed slots are installed on the contoured wall of the transonic nozzle in order 10 control the magnitude of the condensation shock wave and its oscillations. For computations, a droplet growth equation is copuled with two-dimensional Navier-Stokes equation systems. Computations are carried out using a third-order MUSCL type TVD finite-difference scheme with a second-order fractional time step. Baldwin-Lomax turbulence model is employed to close the governing equations. An experiment using an indrafi transonic wind tunnel is made to validate the computational results. The current computations represented well the experimental flows. From both the experimental and computational results it is found that the magnitude of the condensation shock wave in the bleed slotted nozzle is signi ficantly reduced, compared with no passive control of solid wall. The oscillations of the condensation shock wave are successfully suppressed by a bleed slot system.

• 한국정보통신학회논문지
• /
• 제5권2호
• /
• pp.257-262
• /
• 2001

본 논문에서는 WDM 기반의 Local Network에서 가변길이 메시지를 수용하기 위한 스케줄링 프로토콜을 제안하였다. 제안된 프로토콜은 제어채널을 예약슬롯과 제어슬롯으로 나누어 제어 패킷의 충돌로 인한 액세스 지연시간을 최소화하였다. 즉, 전송할 메시지가 있는 노드는 빈 제어슬롯이 있으면 제어패킷을 제어슬롯에 전송하고 메시지를 전송한다. 그리고 메시지의 전송이 완료될 때까지 주기적으로 제어패킷을 전송하여 가변길이의 메시지를 전송할 수 있도록 하였다. 또한 빈 제어슬롯이 없는 경우에는 예약슬롯을 이용하여 가장 가까운 시간에 메시지를 전송하기 위한 데이터 슬롯을 미리 예약하여 제어패킷의 충돌로 인한 재전송 횟수를 감소시켰다. 제안된 알고리즘은 기존 프로토콜의 문제점을 해결하였으며 성능향상과 액세스지연시간의 감소 효과를 보였다.

• Journal of information and communication convergence engineering
• /
• 제11권3호
• /
• pp.153-166
• /
• 2013

A hierarchical time division multiple access (HTDMA) medium access control (MAC) protocol is proposed for clustered mobile underwater acoustic networks. HTDMA consists of two TDMA scheduling protocols (i.e., TDMA1 and TDMA2) in order to accommodate mobile underwater nodes (UNs). TDMA1 is executed among surface stations (e.g., buoys) using terrestrial wireless communication in order to share mobility information obtained from UNs which move cluster to cluster. TDMA2 is executed among UNs, which send data to their surface station as a cluster head in one cluster. By sharing mobility information, a surface station can instantaneously determine the number of time slots in a TDMA2 frame up to as many as the number of UNs which is currently residing in its cluster. This can enhance delay and channel utilization performance by avoiding the occurrence of idle time slots. We analytically investigate the delay of HTDMA, and compare it with that of wellknown contention-free and contention-based MAC protocols, which are TDMA and Slotted-ALOHA, respectively. It is shown that HTDMA remarkably decreases delay, compared with TDMA and Slotted-ALOHA.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2017년도 추계학술대회
• /
• pp.55-56
• /
• 2017

본 논문에서는 동일면 도파관(CPW; coplanar waveguide) 급전 방식을 이용하여 실내 디지털 TV(DTV)용 광대역 루프 안테나를 설계하였다. 제안된 루프 안테나는 정사각형 루프와 중앙 급전점을 연결하는 두 개의 원형 섹터로 구성되며, 아래쪽 원형섹터에 CPW 급전선로가 삽입된 형태이다. CPW 급전선로는 DTV응용을 위해 75옴 포트 임피던스와 정합하도록 설계되었으며, 중간 주파수 대역에서 임피던스 정합을 개선하기 위한 슬롯이 접지면에 추가되었다. 최적화된 안테나를 FR4 기판에 제작하고 특성을 실험한 결과, 전압 정재파비(VSWR; voltage standing wave) < 2인 대역이 463-1,280 MHz으로 DTV 대역에서 동작하는 것을 확인하였다.

• Advances in aircraft and spacecraft science
• /
• 제6권4호
• /
• pp.333-348
• /
• 2019

Low fuel regression rate is the main drawback of hybrid rocket which should be overcome. One of the improvement techniques to this problem is usage of a solid fuel grain with a complicated geometry port, which has been promoted owing to the recent development of additive manufacturing technologies. In the design of a hybrid rocket fuel grain with a complicated geometry port, the understanding of fuel regression behavior is very important. Numerical investigations of fuel regression behavior requires a capturing method of solid fuel surface, i.e. gas-solid interface. In this study, level set method is employed as such a method and the preliminary numerical tool for capturing a hybrid rocket solid fuel surface is developed. At first, to test the adequacy of the numerical modeling, the simulation results for circular port are compared to the experimental results in open literature. The regression rates and oxidizer to fuel ratios show good agreements between the simulations and the experiments, after passing enough time. However, during the early period of combustion, there are the discrepancies between the simulations and the experiments, owing to transient phenomena. Second, the simulations of complicated geometry ports are demonstrated. In this preliminary step, a star shape is employed as complicated geometry of port. The slot number effect in star port is investigated. The regression rate decreases with increasing the slot number, except for the star port with many slots (8 slots) in the latter half of combustion. The oxidizer to fuel ratio increases with increasing the slot number.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권12호
• /
• pp.5800-5818
• /
• 2018

Interference may occur when several co-located wireless body area networks (WBANs) share the same channel simultaneously, which is compressed by resource scheduling generally. In this paper, a QoS-aware Adaptive Coloring (QAC) scheduling algorithm is proposed, which contains two components: interference sets determination and time slots assignment. The highlight of QAC is to determine the interference graph based on the relay scheme and adapted to the network QoS by multi-coloring approach. However, the frequent resource assignment brings in extra energy consumption and packet loss. Thus we come up with a launch condition for the QAC scheduling algorithm, that is if the interference duration is longer than a threshold predetermined, time slots rescheduling is activated. Furthermore, based on the relative distance and moving speed between WBANs, a prediction model for interference duration is proposed. The simulation results show that compared with the state-of-the-art approaches, the QAC scheduling algorithm has better performance in terms of network capacity, average delay and resource utility.

• Journal of information and communication convergence engineering
• /
• 제9권2호
• /
• pp.150-154
• /
• 2011

In this paper a four-pole elliptic function bandpass filter is designed with two ground slots. A research of microstrip bandpass filters (BPF) using defected ground structures (DGS) is presented. DGS technique allows designs of tight couplings without the necessity of using very narrow coupling gaps. The simulator Sonnet is used to design the resonator and to calculate the coupling coefficient of the basic coupling structure. Compared to similar microstrip filters without defected ground structure, the simulated performances of these novel structures indicate some technological advantages.

• 한국통신학회:학술대회논문집
• /
• 한국통신학회 2006년도 하계종합학술발표회 논문 초록집
• /
• pp.690-690
• /
• 2006

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -2
• /
• pp.876-879
• /
• 2002

The paper presents the analysis and results of traffic measurements in the 155 Mbit/s real working ATM backbone network. The traffic is described as an ordered sequence of real-time cells. In this paper we analyze two timescales in which some form of a stochastic process is taking place: cell scale and burst scale. We present another way to describe the cell flow in ATM networks by definition the function, designed to be the probability of the burst of length ∫in n sequential slots.