• Journal of Electrical Engineering and Technology
• /
• v.11 no.1
• /
• pp.135-142
• /
• 2016

Generally, closed slots are adopted to reduce the water friction loss in both the stator and the rotor of water filling submersible motor due to the special environment of operation. One of the obvious differences between the traditional induction motors and water filling submersible motors is that the submersible motors only need relatively smaller starting torque. This paper aims to analyze the slot leakage reactance of water filling submersible motor during starting transient operation. An improved analytical method which considered the magnetic saturation of the slot bridge and the skin effect of rotor bars is proposed. The slot permeance factor which has a direct impact on the slot leakage reactance is calculated. Then finite element models with different stator slot types are constructed and search coils are introduced to measure the slot flux linkage. Moreover, the starting performances of the models with two typical stator slots are compared and the flux leakage characteristics are obtained. Finally, the results obtained by finite element method are very close to the results obtained by analytical method.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.8
• /
• pp.820-825
• /
• 2008

A method to improve isolation characteristics of internal MIMO antenna systems for wireless portable devices operating in the $2.3{\sim}2.4$ GHz band is presented. The proposed system incorporates multiple pairs of L-slots between the two antennas in the ground plane, which operate like a band-stop filter, suppressing mutual coupling between the antennas and resulting in improved isolation. A MIMO antenna system with 6 pairs of L-slots shows reflection loss of -26.4 dB and isolation of -37.5 dB.

• Journal of Communications and Networks
• /
• v.17 no.3
• /
• pp.247-255
• /
• 2015

In this paper, we propose an adaptive time division multiple access based medium access control (MAC) protocol, called bitmap-assisted shortest job first based MAC (BS-MAC), for hierarchical wireless sensor networks (WSNs). The main contribution of BS-MAC is that: (a) It uses small size time slots. (b) The number of those time slots is more than the number of member nodes. (c) Shortest job first (SJF) algorithm to schedule time slots. (d) Short node address (1 byte) to identify members nodes. First two contributions of BS-MAC handle adaptive traffic loads of all members in an efficient manner. The SJF algorithm reduces node's job completion time and to minimize the average packet delay of nodes. The short node address reduces the control overhead and makes the proposed scheme an energy efficient. The simulation results verify that the proposed BS-MAC transmits more data with less delay and energy consumption compared to the existing MAC protocols.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.05a
• /
• pp.119-124
• /
• 2001

A new WDM-based protocol for scheduling a variable-length message is proposed in this paper. Two control slots, Pre-reservation slot and Reservation Slot, are used to coordinate transmission and diminish the collisions of packet to minimize the access delay. When there is an idle reservation slot, a control packet is transmitted on that slot and message is transferred. And the node continues to transmit its control packet through the corresponding slot every cycle, until the message is completely transmitted. If an idle reservation slot is not available, the node schedules the transmission time of message in earliest available time using Pre-reservation slots. The proposed scheduling protocol has several advantages; any new node can join the network anytime without network re-initialization. Moreover, with the pre-reservation slots, we can avoid the packet collisions and destination conflicts, and we can improve the access delay time for message transmissions.

• Journal of information and communication convergence engineering
• /
• v.15 no.4
• /
• pp.199-204
• /
• 2017

A compact dual-band half-ring-shaped (HRS) bent slot antenna fed by a coplanar waveguide for wireless local area network (WLAN) and worldwide interoperability for microwave access (WiMAX) applications is presented. The antenna consists of two HRS slots with different lengths and widths. The two HRS slots are connected through an arc-shaped slit, and the upper HRS slot is bent in order to reduce the size of the antenna. The optimized dual-band HRS bent slot antenna operating in the 2.45 GHz WLAN and 3.5 GHz WiMAX bands is fabricated on an FR4 substrate with dimensions of 30 mm by 30 mm. The slot length of the proposed dual-band slot antenna is reduced by 35%, compared to a conventional dual-band rectangular slot antenna. Experimental results show that the proposed antenna operates in the frequency bands of 2.40-2.49 GHz and 3.39-3.72 GHz for a voltage standing wave ratio of less than 2, and measured gain is larger than 1.4 dBi in the two bands.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.2
• /
• pp.145-151
• /
• 2008

In this paper, a dual band microstrip antenna with similar radiation pattern for the satellite internet service is proposed. The proposed antenna has two Y-shaped slots on the microstrip patch that is fabricated on RO4003 substrate with a dielectric constant of 3.38 and a thickness of 0.508 mm, and operates in the 2 GHz and 5 GHz bands. The size of the antenna is $50\times47.5\times6.5\;mm^3$, and fed by coaxial cable. The measured bandwidths of the antenna are 2.398$\sim$2.507 GHz and 5.458$\sim$5.972 GHz for VSWR<2. The measured gains are 8.92 dBi and 7.74 dBi, respectively, for the lower and upper bands.

• Journal of Magnetics
• /
• v.19 no.1
• /
• pp.84-89
• /
• 2014

This paper presents an analytical prediction and experimental verification of the electromagnetic performance of a parallel magnetized surface-mounted permanent magnet (SPM) motor having a fractional number of slots per pole combination. On the basis of a two-dimensional (2-D) polar coordinate system and a magnetic vector potential, analytical solutions for flux density produced by the permanent magnets (PMs) and stator windings are derived. Then, analytical solutions for back-electromotive force (emf) and electromagnetic torque are derived from these field solutions. The analytical results are thoroughly validated with 2-D nonlinear finite element (FE) analysis results. Finally, the experimental back-emf and electromagnetic torque measurements are presented to test the validity of the analysis.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.241-243
• /
• 1996

This papar presents an analysing method of radial force densities acting on each stator tooth of an induction motor with skewed slots. Two-dimensional finite element method is used for electromagnetic Held analysis of an induction motor, and skew effects are considered by coupling several disks cut by planes perpendicular to the shaft. Radial force densities as a source of vibration are calculated along the surface elements of each stator tooth and its time harmonics are examined by discrete Fourier decomposition.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.12A
• /
• pp.1948-1959
• /
• 1999

The error rate performance of the proposed $\pi$/4-differential quadructure phase shift keying( $\pi$/4-DQPSK) with nonredundant multiple error correction is analyzed for Nakagami fading channel. The scheme for differential detection of $\pi$/4-QPSK with nonredundant multiple error correction utilizes the output that employ the received signal delayed by more than two time slots. It was observed that the performance increased as the error correction capability increased.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.5
• /
• pp.1087-1095
• /
• 1990

A finite element method is used for analyzing the resonance characteristics of circular wind tunnel. Two-dimensional circular wind tunnel with one and three slots is considered. The wind tunnel resonance characteristics are affected by the number and position of the slots of the wind tunnel. The resonant frequencies for the vertical vibration mode are higher than those for the horizontal vibration mode. The resonance frequencies increase as the open area ratio increases.