• Journal of the Korean Society of Food Culture
• /
• v.35 no.2
• /
• pp.193-200
• /
• 2020

This study was conducted to understand the sensory characteristics and consumer acceptance for the commercially available clear broth for noodles. Totally, eight different clear broth samples were evaluated in this study. Seven trained panelists developed and evaluated sensory characteristics in the descriptive analysis. Significant differences (p<0.05) were obtained for all 28 attributes evaluated. Descriptive data was obtained by performing multivariate analysis of variance to identify differences between samples. Principal component analysis (PCA) was performed on the mean values of descriptive attributes obtained in the descriptive analysis, and summarizes the sensory characteristics of clear broth for noodles. PCA of the clear broths revealed that the first two principal components are responsible for 80.66% variations. For sensory testing, 160 consumers were recruited, and their acceptance for each sample was assessed. Consumer data was obtained by applying partial least square-regression (PLSR) to establish the relationship between the descriptive data and the consumer acceptance data.

• Journal of Magnetics
• /
• v.21 no.1
• /
• pp.57-60
• /
• 2016

Non Destructive Testing (NDT) methods that are capable of detecting the wall thinning and defects through insulation and cladding sheets are necessary. In this study we developed a Pulsed Eddy Current (PEC) system to detect wall thinning of ferro magnetic steel pipes covered with 95 mm thick fiber glass thermal insulator and shielded with aluminum plate of thickness 0.4 mm. In order to confirm the thickness change due to wall thinning, two different sensors, a hall sensor and a search coil sensor were used as a detecting element. In both the cases, the experimental data indicates a considerable change in the detected pulse corresponding to the change in sample thickness. The thickness of the tube was made to change such as 2.5 mm, 5 mm and 8 mm from the inner surface to simulate wall thinning. Fast Fourier Transform (FFT) was calculated using window approach and the results were summarized which shows a clear identification of thickness change in the test specimen by comparing the magnitude spectra.

• 한국방재학회:학술대회논문집
• /
• 2010.02a
• /
• pp.51.2-51.2
• /
• 2010

A novel approach of Poisson cluster stochastic rainfall generator was validated in its ability to reproduce important rainfall and watershed response characteristics at 104 locations of the United States. The suggested novel approach - The Hybrid Model(THM), as compared to the traditional ones, has an additional function to account for the year-to-year variability of rainfall statistics. The two-sample Kolmogorov-Smirnov test was used to see how well THM and traditional approach of Poisson cluster rainfall model reproduce the distribution of the following hydrologic variables: monthly maximum rainfall depths with 1, 3, 6, 12, and 24 hour duration, monthly maximum flow peaks at the virtual watersheds with Curve Number of 50, 60, 70, 80 and 90; and monthly runoff depths at the same virtual watersheds. In all of the testing variables, THM significantly outperformed the traditional approach. This result indicates that the year-to-year variability of rainfall statistics contains important information about the characteristics of rainfall processes that were not considered by the conventional approach of Poisson cluster rainfall modeling and that further considering it in rainfall simulation will enhance the performance of the rainfall models.

• Journal of Korean Institute of Industrial Engineers
• /
• v.6 no.1
• /
• pp.17-22
• /
• 1980

The performance of scientific researchers has been studied from a number of different aspects, mostly in developed countries. This paper attempted to identify salient factors influencing scientific performance at individual level in a developing country. A model describing the productivity and performance of scientific researchers was developed. Four hypotheses were derived from the model; i) the degree of diversity of a researcher will affect the degree of his scientific performance, ii) the degree of dedication will affect the degree of his performance, iii) the degree of research pressure will affect the degree of his performance, and iv) the degree of satisfaction will affect the degree of his performance. Data were collected through questionnaires responded by 48 researchers from two research organizations. The results of data analysis supported the hypotheses in part. Specifically, diversity measured by the number of research areas was related to the productivity of research reports (p<0.05); research pressure influenced the average number of research papers (p<0.05). The results of hypothesis testing of the satisfaction showed mixed directions according to the indicators. Even though the results of data analysis did not support the hypotheses unanimously, probably due to the limitation of sample size, most of the descriptive analysis indicated that the direction of hypotheses in developed countries seemed to be similar in developing country too. However, more research efforts are needed to verify the research findings of developed countries in developing countries.

• Geomechanics and Engineering
• /
• v.13 no.6
• /
• pp.1045-1055
• /
• 2017

Tensile strength is considered key properties for characterizing rock material in engineering project. It is determined by direct and indirect methods. Point load test is a useful testing method to estimate the tensile strengths of rocks. In this paper, the effects of rock shape on the point load index of gypsum are investigated by PFC2D simulation. For PFC simulating, initially calibration of PFC was performed with respect to the Brazilian experimental data to ensure the conformity of the simulated numerical models response. In second step, nineteen models with different shape were prepared and tested under point load test. According to the obtained results, as the size of the models increases, the point load strength index increases. It is also found that the shape of particles has no major effect on its tensile strength. Our findings show that the dominant failure pattern for numerical models is breaking the model into two pieces. Also a criterion was rendered numerically for determination of tensile strength of gypsum. The proposed criteria were cross checked with the results of experimental point load test.

• Structural Engineering and Mechanics
• /
• v.76 no.4
• /
• pp.479-489
• /
• 2020

This paper proposed a novel form of reinforced concrete (RC) shear wall confined with boundary columns. The structural effect of applying steel fiber reinforced concrete (SFRC) in the wall-column systems was studied. Three full-scale wall samples were constructed including two RC wall-RC column samples with different stirrup ratios and one RC wall-SFRC column sample. Low frequency cyclic testing was carried out to investigate the failure modes, hysteretic behavior, load-bearing capacity, ductility, stiffness degradation and energy dissipation. ABAQUS models were set up to simulate the structural behavior of tested samples, and good agreement was achieved between numerical simulation and experimental results. A further supplementary parametric study was conducted based on ABAQUS models. Both experimental and numerical results showed that increasing stirrup ratio in boundary columns did not affect much on load bearing capacity or stiffness degradation of the system. However, applying SFRC in boundary columns showed significant enhancement on load bearing capacity. Numerical simulation also shows that the structural performances of RC wall-SFRC column system were comparable to a wall-column system fully with SFRC.

• Geomechanics and Engineering
• /
• v.16 no.5
• /
• pp.547-558
• /
• 2018

Studies of soil dynamic properties in Malaysia are still very limited. This study aims to investigate the dynamic properties of two selected tropical residual soils (i.e., Sandy Clay and Sandy Silt) and a sand mining trail (Silty Sand) in Peninsular Malaysia using 1g shaking table test. The use of 1g shaking table test for soil dynamic testing is often constrained to large strain level and small confining pressure only. Three new experimental setups, namely large laminar shear box test (LLSBT), small chamber test with positive air pressure (SCT), and small sample test with suction (SSTS) are attempted with the aims of these experimental setups are capable of evaluating the dynamic properties of soils covering a wider range of shear strain and confining pressure. The details of each experimental setup are described explicitly in this paper. Experimental results show that the combined use of the LLSBT and SCT is capable of rendering soil dynamic properties covering a strain range of 0.017%-1.48% under confining pressures of 5-100 kPa. The studied tropical residual soils in Malaysia behaved neither as pure sand nor clay, but show a relatively good agreement with the dynamic properties of residual soils in Singapore. Effects of confining pressure and plasticity index on the studied tropical residual soils are found to be insignificant in this particular study.

• Proceedings of the National Institute of Ecology of the Republic of Korea
• /
• v.2 no.4
• /
• pp.298-304
• /
• 2021

This study aimed to determine the applicability of drones and air quality sensors in environmental monitoring of air pollutant emissions by developing and testing two new methods. The first method used orthoimagery for precise monitoring of pollutant-emitting facilities. The second method used atmospheric sensors for monitoring air pollutants in emissions. Results showed that ground sample distance could be established within 5 cm during the creation of orthoimagery for monitoring emissions, which allowed for detailed examination of facilities with naked eyes. For air quality monitoring, drones were flown on a fixed course and measured the air quality in point units, thus enabling mapping of air quality through spatial analysis. Sensors that could measure various substances were used during this process. Data on particulate matter were compared with data from the National Air Pollution Measurement Network to determine its future potential to leverage. However, technical development and applications for environmental monitoring of pollution-emitting facilities are still in their early stages. They could be limited by meteorological conditions and sensitivity of the sensor technology. This research is expected to provide guidelines for environmental monitoring of pollutant-emitting facilities using drones.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.2
• /
• pp.401-410
• /
• 2021

The study tests resilience and work ethics as mediators between charismatic leadership and affective commitment to change. Many organizations, such as banking, insurance companies, and financial institutions, face strong competition and consequently need to effect considerable change within the organization. Many variables have a significant impact on the success of organizational change, and people (resilience and work ethics) as well as change leaders are primary variables in this research. This study, using structural equation modeling, was conducted on a sample of 355 employees from banking and insurance companies. In this study, the inventory of affective commitment to change, the Conger-Kanungo charismatic leadership scale, resilience, and work ethic inventory was used. The results showed that resilience is a partial mediator between charismatic leadership and affective commitment to change. Meanwhile, work ethic was not a mediator between the two variables. The results showed that charismatic leadership can have a direct, positive, and significant impact on affective commitment to change without mediators, and that resilience can act as partial mediator. Furthermore, work ethic had a significant and positive effect on affective commitment to change through resilience. In other words, resilience is a full mediator for the impact of work ethic on affective commitment to change.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.6 no.2
• /
• pp.313-321
• /
• 1996

Our laboratoy has been participated in Proficiency Analytical Testing (PAT) program which is operated by the Americal Industrial Hygiene Association in cooperation with the National Institute for Occupational Safety and Health (NIOSH). The program is designed to assist a laboratory improve its analytical performance by providing samples on a quarterly basis, evaluating the results, and providing reports on how well the laboratory performed. Evaluation of the results reported here covers five rounds of the PAT program (round 121~round 125). The way a laboratory is evaluated by PAT program is as follows: 1) There is no overall proficiency rating given to a laboratory. 2) A proficiency rating is given for each type of analyze (i.e., metals, silica, asbestos, solvents) that a laboratory analyzed. 3) Proficiency is rated acceptable ("A") if Z score lies between -3 and +3, and unacceptable if Z score is either higher than +3 ("H") or lower than -3 ("Lo"). Z score = (reported data - reference value) / standard deviation 4) For a laboratory to be rated proficient it must either have had no outliers over the most recent two rounds or of the samples actually analyzed over the past year (past four rounds), 75 % or more of the analyze sample results must be acceptable. According to the above rating criteria of PAT program, performance of metals including cadmium, lead, chromium and zinc, and asbestos sample analyses were rated acceptable ("A"). For silica analyses, all samples except one out of four samples in round 122 was rated high("H") were acceptable showing 95 % of ing 95 % of acceptance rate (19/20) throughout the rounds. Analyses of organic solvents were done on 52 samples in 9 types including methanol(MOH), 1,1,1-trichloroethane(MCM), tetrachloroethylene(PCE), trichloroethylene(TCE), benzene(BNZ), o-xylene(OXY), toluene(TOL), chloroform(CFM), 1,2-dichloroethane(DCE). All samples analyzed were rated acceptable except 2 samples that were rated high; one out of each four MCM and TCE samples in round 121, and one that was low out of four o-xylene analyses in round 122 indicating 94 % of acceptance rate(49/52) throughout the rounds. According to the laboratory rating criteria, our laboratory is rated proficient so far for all types of contaminants.