• Nuclear Engineering and Technology
• /
• v.35 no.4
• /
• pp.299-308
• /
• 2003

Fabrication technique of $(Th,U)O_2$ pellets has been investigated. Powder mixtures of $ThO_2\;and\;UO_2$ were milled in two different ways-dry and wet milling. Milled powder was compacted and sintered to $(Th,U)O_2$ pellets. The wet-milled powder leads to a $(Th,U)O_2$ pellet having a high sintered density and uniform distribution of U and Th, compared to the dry-milled powder. The sintered density of a $(Th,U)O_2$ pellet tends to decrease by increasing the content of $ThO_2$. The thermal conductivity of $ThO_2\;and\;(Th,U)O_2$ pellets was measured by the laser flash method. The thermal conductivity of the $ThO_2$ pellet is higher than that of the $UO_2$ pellet, and the thermal conductivities of $(Th,U)O_2$ pellets containing $65wt\%\;and\;35wt\%\;ThO_2$ pellets are lower than that of the $UO_2$ pellet.

• Journal of Powder Materials
• /
• v.15 no.4
• /
• pp.271-278
• /
• 2008

Sintering behavior of iron nanopowder agglomerate compact prepared by slurry compaction method was investigated. The Fe nanopowder agglomerates were prepared by hydrogen reduction of spray dried agglomerates of ball-milled $Fe_2O_3$ nanopowder at various reduction temperatures of $450^{\circ}C$, $500^{\circ}C$ and $550^{\circ}C$, respectively. It was found that the Fe nanopowder agglomerates produced at higher reduction temperature have a higher green density compact which consists of more densified nanopowder agglomerates with coarsed nanopowders. The sintering behavior of the Fe nanopowder agglomerates strongly depended on the powder packing density in the compact and microstructure of the agglomerated nanopowder. It was discussed in terms of two sintering factors affecting the entire densification process of the compact.

• Mass Spectrometry Letters
• /
• v.7 no.4
• /
• pp.102-105
• /
• 2016

This study explored the feasibility of using a carburization technique to enhance the ion intensity of isotopic analysis of ultra-trace levels of uranium using thermal ionization mass spectrometry (TIMS). Prior to fixing uranium samples on TIMS filaments, graphite powder suspended in nitric acid was deposited on rhenium filaments. We observed an enhancement of $^{238}U^+$ intensity by a factor of two when carburization was used, and were able to roughly optimize the amount of graphite powder necessary for carburization. The positive shift in heating current when evaporating filaments upon carburization implies that uranium was chemically altered by carburization, when compared to normal fixation processes. The good agreement between our method and known standards down to an ultra-trace level shows that the proposed technique can be applied to isotopic uranium analysis down to abundances of ~10 pg.

• Biomolecules & Therapeutics
• /
• v.9 no.4
• /
• pp.307-310
• /
• 2001

The hair-growth effect of Illite was suggested by some people who were using Illite as a beautifying material. We investigated the hair-growth effect of Illite powder. The hair-growth effects were investigated by two methods; the activity of hair-growth after shaving the hairs on the black mouse (C57BL/6) and the recovery activity of hair-growth after hair-loss induced by cyclophosphamide treatment. Suspension of Illite powder was applied to the back of the black mouse by method of skin paste. Illite promoted significantly the hair growth of mouse in both conditions of shaving and hair-loss. And then we investigated the toxicity which may be induced by Illite when it was administrated orally as a single dose. We could not fond out any significant toxicity induced by single dose oral administration of Illite.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 1998.11a
• /
• pp.179-182
• /
• 1998

It is widely recognized that conventional means for determining the minimum ignition energy(MIE) of powder are time-consuming and require operational skill. As a variety of new fine powders are being produced day by day in industry, there is an urgent need to a quicker and more economical means to measure MIE. To meet this requirement, we have developed a measurement system which employs a novel method to create an air/dust mixture in a miniature combustion box. In this system, the powder to be tested input into a hopper made of metal mesh, and successively fed downward to form a thin, curtain-like dust/air mixture by vibration. With this new apparatus, three type of powders -Lycopodium, Anthraquinone, and Polyacrylonitrile-were tested and the MIE data were compared with those taken with a conventional apparatus(the Hartmann tube). Two of them agreed satisfactory, but the other, anthraquinone, showed quite different values supposedly due to the agglomeration of the powder particles by static-charge.

• Archives of Metallurgy and Materials
• /
• v.63 no.3
• /
• pp.1467-1471
• /
• 2018

The objective of the present study was to investigate the effects of Sn addition on the mechanical and corrosion properties of Mg-1Zn-1Zr-xSn (x = 1, 2, 3, 4, 5 wt.%) alloys prepared by powder-in-tube rolling (PTR) method. The PTR-treated Mg alloys reached 98.3% of theoretical density. The hardness of the alloy increased with Sn addition. Two main intermetallic phases, Mg₂Sn and Zn₂Zr₃, were formed in the alloys. The Mg₂Sn intermetallic particles were observed along the grain boundaries, while the Zn₂Zr₃ particles were distributed in the Mg matrix. The addition of 1 wt. % Sn caused the corrosion potential to shift toward a more positive value, and the resulting alloy exhibited low corrosion current density.

• Journal of Korean Neurosurgical Society
• /
• v.29 no.5
• /
• pp.664-667
• /
• 2000

Objective : Excessive bleeding from the exposed cancellous bone surface may cause serious problem such as hematoma formation, infection, transfusion reaction during operation and postoperative period. There are several kinds of bleeding control agent on the cancellous bone surface including bone wax, gelatin sponge ($Gelfoam^{(R)}$), oxidized cellulose($Oxycel^{(R)}$, $Surgicel^{(R)}$), thrombin, microfibrillar collagen($Avitene^{(R)}$) etc. In the past, bone wax was used to control bone bleeding but it is associated with increased infection rate and fusion failure. Recently, gelfoam paste has been used to control cancellous bone bleeding. We controlled the cancellous bone bleeding with the mixture of gelfoam powder and thrombin powder. Material and Methods : Seventeen patients of posterior fusion on the 4 motion segments of thoracolumbar spine were selected to compare the result of bone bleeding control. In the test group of 9 patients, the cancellous bone bleeding was controlled with the mixture of Gelfoam and thrombin powder during operation. In the control group of 8 cases, no chemical hemostatic agent was used to manage the bone bleeding during operation. We calculated the total amount of bleeding from cancellous bone surface during and after operation in the two groups and compared their statistic significance of the result which was judged by student t-test. Results : The average amount of intraoperative bleeding was 1825ml in control group, 811ml in test group(p<0.01). The amount of postoperative bleeding was 943ml in control group and 812ml in test group, there were no significant difference in the amount of bleeding during postoperative period between two groups(p>0.5). Total amount of blood was decreased in as much as 1150ml in test group(p<0.01). Conclusion : We concluded that the application of the mixture of thrombin and gelfoam powder on the cancellous bone surface is the effective control method of cancellous bone bleeding for multilevel posterior spinal fusion.

• Journal of Powder Materials
• /
• v.7 no.1
• /
• pp.27-34
• /
• 2000

The fabrication process and mechanical properties of SiC particle prefrrms with high volume fraction ranged 50∼71% were investigated to make metal matrix composites for possible applications as heat sinks in electronic packares. The SiC particle preforms with 50∼71vol% of reinforcement were fabricated by a new modified process named ball milling and pressing method. The SiC particle performs were fabricated by ball milling of SiC particles with single sized of 48${\mu}$m in diameter or two different size of 8${\mu}$m and 48${\mu}$min diameter, with collodal SiO2 as inorgnic binder in distilled water, and the mixed slurries were cold pressed for consolidation into final prefom. The compressive strengths og calcined SiC particle prefoms increased from 20MPa to 155MPa with increasing the content of inorganis binder, temperature and time for calcination. The increase of compressive strength of SiC particle bridge the interfaces of two neighboring SiC particles.

• Journal of Powder Materials
• /
• v.6 no.1
• /
• pp.18-35
• /
• 1999

Phase equilibria in the system Si3N4-TiC-TiCxN1-x-C-N were determined by thermodynamic calculations (CALPHAD-method). The reaction peaction paths for Si3N4-TiC and SiC-TiC composites in the Ti-Si-C-n system were simulated at I bar N2-pressure and varying terpreatures. At a temperature of 1923 K two tie-triangles (TiC0.34N0.66+SiC+C and TiC0.13N0.87+SiC+Si3N4) and two 2-phase fieds (TiCxN1-x+SiC; 0.13

• The Journal of Korean Academy of Prosthodontics
• /
• v.35 no.1
• /
• pp.221-243
• /
• 1997

The objective of this study was to characterize the mechanical properties of $Y_{2}O_{3}$-containing glass infiltrated ceramic core material, which was made by pressureless powder packing method. A pure alumina powder with a grain size of about $4{\mu}m$ was packed without pressure is silicon mold to form a bar shaped sample, and applied PVA solution as a binder. Samples were sinterd at $1350^{\circ}C$ for 1 hour. After cooling, $Y_{2}O_{3}$-containing glass($SiO_{2},\;Y_{2}O_{3},\;B_{2}O_{3},\;Al_{2}O_{3}$, ect) was infiltrated to the sinterd samples at $1300^{\circ}C$ for 2 hours and cooled. Six different proportions $Y_{2}O_{3}$ of were used to know the effect of the mismatch of the thermal expansion coefficient between alumina powder and glass. The samples were ground to $3{\times}3{\times}30$ mm size and polished with $1{\mu}m$ diamond paste. Flexural strength, fracture toughness, hardness and other physical properties were obtained, and the fractured surface was examined with SEM and EPMA. Ten samples of each group were tested and compared with In-Ceram(tm) core materials of same size made in dental laboratory. The results were as follows : 1. The flexural strengths of group 1 and 3 were significantly not different with that of In-Ceram, but other experimental groups were lower than In-Ceram. 2. The shrinkage rate of samples was 0.42% after first firing, and 0.45% after glass infiltration. Total shrinkage rate was 0.87%. 3. After first firing, porosity rate of experimental groups was 50%, compared with 22.25% of In-Ceram. After glass infiltration, porosity rate of experimental groups was 2%, and 1% in In-Ceram. 4. There was no statistical difference in hardness between two materials tested, but in fracture toughness, group 2 and 3 were higher than In-Ceram. 5. The thermal expansion coefficients of experimental groups were varied to $4.51-5.35{\times}10^{-6}/^{\circ}C$ according to glass composition, also the flexural strengths of samples were varied. 6. In a view of SEM, many microparticles about $0.5{\mu}m$ diameter and $4{\mu}m$ diameter were observed in In-Ceram. But in experimental group, the size of most particles was about $4{\mu}m$, and a little microparticles was observed. The results obtained in this study showed that the mismatch of the thermal expansion coefficients between alumina powder and infiltrated glass affect the flexural strength of alumin/glass composite. The $Y_{2}O_{3}$-containing glass infiltrated ceramic core made by powder packing method will takes less time and cost with sufficient flexural strength similar to all ceramic crown made with slip casting technique.