• 마이크로전자및패키징학회지
• /
• 제21권4호
• /
• pp.45-49
• /
• 2014

본 연구에서는 낮은 비용과 간단한 공정의 장점을 가지고 있는 저온수열합성법을 이용하여 r-plane (1-102) sapphire 기판 위에 non-polar a-plane ZnO 박막을 성장하였다. 일반적으로 nanorod 형태의 ZnO를 성장시키는 특성을 보이는 Hexamethylenetetramine (HMT)와 2D layer 형태의 ZnO를 성장특성을 보이는 것으로 알려진 sodium citrate, 두 가지 전구체를 동시에 첨가하여 성장 하였을 때 몰 농도의 변화에 따른 ZnO 성장 특성을 비교해 보았다. ZnO 구조체의 형태와 특성 변화에 대하여 field emission scanning electron microscope (FE-SEM), high resolution X-ray diffraction(HRXRD)을 이용하여 분석을 진행하였다. 결과적으로, 두 가지의 용액의 특정 몰 농도일 때 r-plane (1-102) sapphire 기판 위에서 non polar a-plane (11-20) ZnO 구조체가 성장 될 수 있음을 확인 하였다. 이는 첨가제 조건에 의하여 c축 성장을 억제시키고, 측면 성장을 촉진시키는 반응에 의한 것으로 생각된다.

• Structural Engineering and Mechanics
• /
• 제89권3호
• /
• pp.253-263
• /
• 2024

Slope stability is generally paid more attention to in slope protection works, especially for slope containing weak layers. Two indexes of safety factor and failure model are selected to perform slope stability. Moreover, the finite element limit analysis method comprehensively combines the advantage of the limit analysis method and the finite element method obtaining the upper and lower bounds of the safety factor and the failure mode under the slope stability limit state. In this study, taking a waste dump containing a weak layer as an engineering background, the finite element limit analysis method is adopted to explore the potential failure mode. Meanwhile, the sensitivity analysis of slope stability is performed on geometrical and geotechnical parameters of the waste dump. The results show that the failure mode of the waste dump slope is two wedges if the weak layer is located on the ground surface (Model A), while the slope can be observed as three wedges failure if the weak layer is below the ground surface (Model B). In addition, both failure modes are highly sensitive to the friction angle of the weak layer and the shear strength of waste disposal, and moderately sensitive to the heap height, the dip angle and cohesion of the weak layer, while the toe cutting has limited effect on the slope stability. Moreover, the sensitivity to the excavation of the ground depends on the location of the weak layer and failure mode.

• Transactions on Electrical and Electronic Materials
• /
• 제1권3호
• /
• pp.23-28
• /
• 2000

A block-oxide layer was formed on the surface of Cu-based leadframe by chamical oxidation method in order to enhance the adhesion strength between Cu-based leadframe and epoxy molding compound (EMC) Using sandwiched double cantilever beam (SDCB) specimens, the adesion strength was measured in terms of interfacial fracture toughness, G$\sub$IC//Results showed that the black-oxide layer was composed of two kinds of layers: pebble-like Cu$_2$O layer and acicular CuO layer, At the initial stage of oxidation the Cu$_2$O layer was preferentially formed and thickened up to around 200 nm whithin 1 minute of the oxidation time. Then the CuO layer started to from atop of the Cu$_2$O layer and thickened up to around 1300 nm until 20 minutes. As soon as the CuO layer formed, the thickness of Cu$_2$O layer began to reduce and finally reached to around 150 nm. The pre-cleaned and the Cu$_2$O coated leadframes showed almost no adhesion of EMC, however, as the CuO precipitates appeared and became continuous, G$\sub$IC/ increased up to around 80 J/㎡. Further oxidation raised G$\sub$IC/ up. to around 100 J/㎡.

• 대한치과의사협회지
• /
• 제9권4호
• /
• pp.157-160
• /
• 1971

To compare the effects of various pulp capping agents that are usually applied to human pulp tissue, adult dogs were bred for a certain period and each capping agent was applied experimentally to pulp tissue after vital pulpotomy. Histological observations are as follows. 1) In comparison between methods of vital pulpotomy, one and two appointment method, different courses of healing were observed. In one appointment method, the granulation tissue formation at the amputation sur face of pulp tissue had a tendency to be transformed to scar tissue formation. In two appointment method, more transformation than that of one appointment method from scar tissue to dentin matrix formation were observed. 2) Histologic changes that have appeared in pulp tissue are a) fixation at outer layer b) degeneration at middle layer c) hyperemia and round cell infiltration at inner layer 3) With use of formocresol mixed zinc oxide powder in two appointment method complete formation of dentin matrix were observed. 4) Among the methods and aagents described above formocresol mixed zinc oxide powder in two appointment method appeared to be relatively effective.

• Structural Engineering and Mechanics
• /
• 제12권1호
• /
• pp.17-34
• /
• 2001

The frictionless contact problem for a layered composite which consists of two elastic layers having different elastic constants and heights resting on two simple supports is considered. The external load is applied to the layered composite through a rigid stamp. For values of the resultant compressive force P acting on the stamp vertically which are less than a critical value $P_{cr}$ and for small flexibility of the layered composite, the continuous contact along the layer - the layer and the stamp - the layered composite is maintained. However, if the flexibility of the layered composite increases and if tensile tractions are not allowed on the interface, for P > $P_{cr}$, a separation may be occurred between the stamp and the layered composite or two elastic layers interface along a certain finite region. The problem is formulated and solved for both cases by using Theory of Elasticity and Integral Transform Technique. Numerical results for $P_{cr}$, separation initiation distance, contact stresses, distances determining the separation area, and the vertical displacement in the separation zone between two elastic layers are given.

• Journal of Chest Surgery
• /
• 제2권1호
• /
• pp.59-64
• /
• 1969

Three cases of traumatic diaphragmatic hernia were repaired in this department from June 1967 to Nov.1968. The first case, a 14 year old girl, was diagnosed as diaphragmatic hernia during the operation of the diffuse peritonitis from jejunaI perforation 3 days after the traffic accident at local clinic and she was transfered to this hospital after the closure of the perforated jejunum. Herniated stomach, transverse colon, spleen and left lobe of the liver were repositioned and the diaphragmatic rupture at the posterolateral portion of the left diaphragm was repaired with two layer sutures by transthoracic approach. The second case. a 26 year old man. was diagnosed immediately after the traffic accident at local clinic and transfered to this hospital 24 hours later. Herniated and distended stomach, transverse colon and jejunum were repositioned and the large diaphragmatic rupture, about 9 cm in length, from the posterolateral portion to the base of the pericardium was directly repaired with two layer sutures. The third case, a 26 year old man, who had a history of stab wound at left lower lateral chest two years ago,was admitted with the sudden onset of abdominal pain and vomiting. The diaphragmatic hernia was confirmed with barium enema. The herniated stomach and transverse colon through the defect, about 3.5 cm in diameter, at anterolateral portion of the left diaphragm, were repositioned and the defect was repaired with two layer sutures. All of the cases recovered uneventfully.

• 한국해안해양공학회지
• /
• 제19권5호
• /
• pp.446-456
• /
• 2007

본 연구에서는 Lynett and Liu(2004a, b)에 의해 유도된 2층 Boussineaq방정식을 이용하여 일정수심상의 규칙파 조건에서 직립벽을 따른 연파를 해석하고, 수리모형실험결과 및 포물형근사식에 의한 해석결과와 비교하였다. 두 가지 수치모형에 의한 해석결과는 수리실험결과와 비교적 잘 일치하였으나, 입사각이 증가할수록 Boussinesq 모형이 포물형모형보다 우수한 결과를 주는 것으로 나타났다. 특히 파랑의 비선형성에 의한 고차 조화성분의 발생은 Boussinesq모형에서만 관찰되었다.

• 한국통신학회논문지
• /
• 제21권8호
• /
• pp.1928-1936
• /
• 1996

In this paper, we propose an adaptive bandwidth allocation algorithm for the transmission of VBR video through ATM Networks. In order to evaluate the required bandwidth for the VBR video, the characteristics of the compressed VBR video generated by the two-layered coder are analyzed with variations in the number of GOP(N), quantizer scale(q), and the number of low-frequency DCT coefficients(.betha.). The two-layer coder which is used to separate from the number of DCT coefficients is designed to transmit the VBR video efficiently. The compressed data generated by the two-layer coder are splitted into the high priority and low priority cells. If congestion is occurred in ATM networks, the minimum image quality is maintained by the high priority cells. The required bandwidth for VBR video is estimated with a prediction algorithm using the scene anframe correlations as well as the statistical properties of the VBR video sources. Strong correlation among the adjacent slices in a frame represents by the scene correlation andstrong correlation among the frames is represented by the frame correlation. The performance of the bandwidth allocation scheme proposed is evaluated in terms of the bandwith utilization, cell loss rate, and SNR with variations in q, n, .betha.. Simulation rewsults shown that the proposed scheme is superior to the conventional methods.

• EDISON SW 활용 경진대회 논문집
• /
• 제5회(2016년)
• /
• pp.288-291
• /
• 2016

Recently, there has been a lot of researches related to two-dimensional (2D) materials due to their new properties and applications emerging upon 2D confinement. A new type of graphene like two-dimensional layer material, nitrogenated holey two-dimensional structure C2N-h2D, that is possession of evenly distributed holes and nitrogen atoms with proper bandgap has been synthesized. Previous calculation studies already have shown that the variance of the orbital interaction, band structure of few-layer C2N-h2D suggests that interlayer coupling does play an important role in its electronic properties. In this point, using first-principles density functional theory calculation, we here explore the effect of porous embedded iron atom and iron substrate on encapsulated few layer C2N-h2D. We show the atomic structures and the corresponding electronic structures of Fe@C2N to elucidate the effect of iron. Finally, this study demonstrates that embedded iron C2N has AA-stacking as most favorable stacked structure in contrast to pure C2N. In addition, iron substrate modifies its encapsulated C2N from semi-metallic states to metallic state.

• Journal of Information Processing Systems
• /
• 제14권1호
• /
• pp.176-190
• /
• 2018

This paper presents a novel convolutional neural network based multi-feature fusion learning method for non-rigid 3D model retrieval, which can investigate the useful discriminative information of the heat kernel signature (HKS) descriptor and the wave kernel signature (WKS) descriptor. At first, we compute the 2D shape distributions of the two kinds of descriptors to represent the 3D model and use them as the input to the networks. Then we construct two convolutional neural networks for the HKS distribution and the WKS distribution separately, and use the multi-feature fusion layer to connect them. The fusion layer not only can exploit more discriminative characteristics of the two descriptors, but also can complement the correlated information between the two kinds of descriptors. Furthermore, to further improve the performance of the description ability, the cross-connected layer is built to combine the low-level features with high-level features. Extensive experiments have validated the effectiveness of the designed multi-feature fusion learning method.